aboutsummaryrefslogtreecommitdiffstats
path: root/Kbuild (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-04-26tcp: do not pass timestamp to tcp_fastretrans_alert()Eric Dumazet1-8/+4
Not used anymore now tp->tcp_mstamp holds the information. This is needed to remove sack_state.ack_time in a following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rack_identify_loss()Eric Dumazet1-5/+4
Not used anymore now tp->tcp_mstamp holds the information. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rack_mark_lost()Eric Dumazet3-3/+3
This is no longer used, since tcp_rack_detect_loss() takes the timestamp from tp->tcp_mstamp Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rack_detect_loss()Eric Dumazet1-7/+4
We can use tp->tcp_mstamp as it contains a recent timestamp. This removes a call to skb_mstamp_get() from tcp_rack_reo_timeout() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: add tp->tcp_mstamp fieldEric Dumazet2-0/+4
We want to use precise timestamps in TCP stack, but we do not want to call possibly expensive kernel time services too often. tp->tcp_mstamp is guaranteed to be updated once per incoming packet. We will use it in the following patches, removing specific skb_mstamp_get() calls, and removing ack_time from struct tcp_sacktag_state. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26rhashtable: remove insecure_max_entries paramFlorian Westphal2-10/+2
no users in the tree, insecure_max_entries is always set to ht->p.max_size * 2 in rhtashtable_init(). Replace only spot that uses it with a ht->p.max_size check. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: move xdp_prog field in RX cache linesEric Dumazet1-1/+1
(struct net_device, xdp_prog) field should be moved in RX cache lines, reducing latencies when a single packet is received on idle host, since netif_elide_gro() needs it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25drivers: net: xgene-v2: Fix error return code in xge_mdio_config()Wei Yongjun1-0/+1
Fix to return error code -ENODEV from the no PHY found error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: Generic XDPDavid S. Miller5-22/+187
This provides a generic SKB based non-optimized XDP path which is used if either the driver lacks a specific XDP implementation, or the user requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE. It is arguable that perhaps I should have required something like this as part of the initial XDP feature merge. I believe this is critical for two reasons: 1) Accessibility. More people can play with XDP with less dependencies. Yes I know we have XDP support in virtio_net, but that just creates another depedency for learning how to use this facility. I wrote this to make life easier for the XDP newbies. 2) As a model for what the expected semantics are. If there is a pure generic core implementation, it serves as a semantic example for driver folks adding XDP support. One thing I have not tried to address here is the issue of XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or whatever even if the XDP program doesn't try to push headers at all. I think we really need the verifier to somehow propagate whether certain XDP helpers are used or not. v5: - Handle both negative and positive offset after running prog - Fix mac length in XDP_TX case (Alexei) - Use rcu_dereference_protected() in free_netdev (kbuild test robot) v4: - Fix MAC header adjustmnet before calling prog (David Ahern) - Disable LRO when generic XDP is installed (Michael Chan) - Bypass qdisc et al. on XDP_TX and record the event (Alexei) - Do not perform generic XDP on reinjected packets (DaveM) v3: - Make sure XDP program sees packet at MAC header, push back MAC header if we do XDP_TX. (Alexei) - Elide GRO when generic XDP is in use. (Alexei) - Add XDP_FLAG_SKB_MODE flag which the user can use to request generic XDP even if the driver has an XDP implementation. (Alexei) - Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS attribute. (Daniel) v2: - Add some "fall through" comments in switch statements based upon feedback from Andrew Lunn - Use RCU for generic xdp_prog, thanks to Johannes Berg. Tested-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: fix invalid use of sizeof in qed_alloc_qm_data()Wei Yongjun1-1/+1
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: b5a9ee7cf3be ("qed: Revise QM configuration") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25bpf: map_get_next_key to return first key on NULLTeng Qin5-20/+50
When iterating through a map, we need to find a key that does not exist in the map so map_get_next_key will give us the first key of the map. This often requires a lot of guessing in production systems. This patch makes map_get_next_key return the first key when the key pointer in the parameter is NULL. Signed-off-by: Teng Qin <qinteng@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25selftests/net: Fix broken test case in psock_fanoutMike Maloney1-1/+1
The error return falue form sock_fanout_open is -1, not zero. One test case was checking for 0 instead of -1. Tested: Built and tested in clean client. Signed-off-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: ethernet: ti: netcp_core: remove unused compl queue mappingIvan Khoronzhuk1-4/+0
This code is unused and probably was unintentionally left while moving completion queue mapping in submit function. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed - VF tunnelling support [VXLAN/GENEVE/GRE]Chopra, Manish8-4/+446
This patch adds hardware channel APIs support between VF and PF for tunnelling configuration for the VFs. According to that configuration VFs can run VXLAN/GENEVE/GRE tunnels over it with tunnel features offloaded. Using these APIs VF can also request for UDP ports configuration to the PF, although PF and it's child VFs share the same port. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Add UDP ports in bulletin boardChopra, Manish9-1/+84
This patch adds support for UDP ports in bulletin board to notify UDP ports change to the VFs Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Configure UDP ports in local context.Chopra, Manish3-36/+52
This patch configures UDP ports locally instead of configuring them in deferred context which would be helpful in synchronizing UDP ports configuration for VFs which will be enabled in further patches. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Disable tunnel offloads for non offloaded UDP portsChopra, Manish1-6/+17
This patch disables tunnel offloads via ndo_features_check() if given UDP port is not offloaded to hardware. This in turn allows to run multiple tunnel interfaces using different UDP ports. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Enable tunnel offloads based on hw configurationChopra, Manish4-11/+51
This patch enables tunnel feature offloads based on hw configuration at initialization time instead of enabling them always. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: refactor tunnelling - API/StructsChopra, Manish7-197/+207
This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25l2tp: define "l2tpeth" device typeGuillaume Nault1-0/+5
Export type of l2tpeth interfaces to userspace (/sys/class/net/<iface>/uevent). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25l2tp: set name_assign_type for devices created by l2tp_eth.cGuillaume Nault1-2/+6
Export naming scheme used when creating l2tpeth interfaces (/sys/class/net/<iface>/name_assign_type). This let userspace know if the device's name has been generated automatically or defined manually. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net sched actions: Complete the JUMPX opcodeJamal Hadi Salim1-0/+25
per discussion at netconf/netdev: When we have an action that is capable of branching (example a policer), we can achieve a continuation of the action graph by programming a "continue" where we find an exact replica of the same filter rule with a lower priority and the remainder of the action graph. When you have 100s of thousands of filters which require such a feature it gets very inefficient to do two lookups. This patch completes a leftover feature of action codes. Its time has come. Example below where a user labels packets with a different skbmark on ingress of a port depending on whether they have/not exceeded the configured rate. This mark is then used to make further decisions on some egress port. #rate control, very low so we can easily see the effect sudo $TC actions add action police rate 1kbit burst 90k \ conform-exceed pipe/jump 2 index 10 # skbedit index 11 will be used if the user conforms sudo $TC actions add action skbedit mark 11 ok index 11 # skbedit index 12 will be used if the user does not conform sudo $TC actions add action skbedit mark 12 ok index 12 #lets bind the user .. sudo $TC filter add dev $ETH parent ffff: protocol ip prio 8 u32 \ match ip dst 127.0.0.8/32 flowid 1:10 \ action police index 10 \ action skbedit index 11 \ action skbedit index 12 #run a ping -f and see what happens.. # jhs@foobar:~$ sudo $TC -s filter ls dev $ETH parent ffff: protocol ip filter pref 8 u32 filter pref 8 u32 fh 800: ht divisor 1 filter pref 8 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2800 success 1005) match 7f000008/ffffffff at 16 (success 1005 ) action order 1: police 0xa rate 1Kbit burst 23440b mtu 2Kb action pipe/jump 2 overhead 0b ref 2 bind 1 installed 207 sec used 122 sec Action statistics: Sent 84420 bytes 1005 pkt (dropped 0, overlimits 721 requeues 0) backlog 0b 0p requeues 0 action order 2: skbedit mark 11 pass index 11 ref 2 bind 1 installed 204 sec used 122 sec Action statistics: Sent 60564 bytes 721 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 action order 3: skbedit mark 12 pass index 12 ref 2 bind 1 installed 201 sec used 122 sec Action statistics: Sent 23856 bytes 284 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Not bad, about 28% non-conforming packets.. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25ipvlan: use pernet operations and restrict l3s hooks to master netnsFlorian Westphal2-15/+70
commit 4fbae7d83c98c30efc ("ipvlan: Introduce l3s mode") added registration of netfilter hooks via nf_register_hooks(). This API provides the illusion of 'global' netfilter hooks by placing the hooks in all current and future network namespaces. In case of ipvlan the hook appears to be only needed in the namespace that contains the ipvlan master device (i.e., usually init_net), so placing them in all namespaces is not needed. This switches ipvlan driver to pernet operations, and then only registers hooks in namespaces where a ipvlan master device is set to l3s mode. Extra care has to be taken when the master device is moved to another namespace, as we might have to 'move' the netfilter hooks too. This is done by storing the namespace the ipvlan port was created in. On REGISTER event, do (un)register operations in the old/new namespaces. This will also allow removal of the nf_register_hooks() in a future patch. Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25can: ti_hecc: fix return value check in ti_hecc_probe()Wei Yongjun1-6/+6
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: dabf54dd1c63 ("can: ti_hecc: Convert TI HECC driver to DT only driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: enable module auto loading for virtual CAN interfacesOliver Hartkopp1-2/+5
Autoload the vcan module when a vcan instance is to be created by 'ip link add type vcan' Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: add Virtual CAN Tunnel driver (vxcan)Oliver Hartkopp4-0/+347
Similar to the virtual ethernet driver veth, vxcan implements a local CAN traffic tunnel between two virtual CAN network devices. See Kconfig entry for details. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: network namespace support for CAN gatewayOliver Hartkopp2-28/+47
The CAN gateway was not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch enables the CAN gateway to be used in different namespaces. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: network namespace support for CAN_BCM protocolOliver Hartkopp2-33/+58
The CAN_BCM protocol and its procfs entries were not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch adds the missing per-net functionality for the CAN BCM. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: complete initial namespace supportOliver Hartkopp5-105/+121
The statistics and its proc output was not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch adds the missing per-net statistics for the CAN subsystem. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: remove obsolete definitionsOliver Hartkopp1-4/+0
can_rx_alldev_list is a per-net data structure now. Remove it's definition here and can_rx_dev_list too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: remove obsolete pernet_operations definitionsOliver Hartkopp1-4/+0
The namespace support for the CAN subsystem does not need any additional memory. So when ".size = 0" there's no extra memory allocated by the system. And therefore ".id" is obsolete too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: fix memory leak in initial namespace supportOliver Hartkopp1-0/+2
The can_rx_alldev_list is a per-net data structure now and allocated in can_pernet_init(). Make sure the memory is free'd in can_pernet_exit() too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: mcba_usb: Add support for Microchip CAN BUS AnalyzerRemigiusz Kołłątaj3-0/+911
SocketCAN driver for Microchip CAN BUS Analyzer (http://www.microchip.com/development-tools/) Changes in v4: - possible memory leak fixed in mcba_usb_write_bulk_callback - LED support added - failure handling in mcba_usb_probe improved - C99 initializers for structs on stack Changes in v3: - improved/simplified CAN ID conversion - functions for transmission of skb and cmd separated - fixed/improved netif_stop_queue handling - style/cosmetic corrections Changes in v2: - Termination handling reimplemented to fit new netlink API (IFLA_CAN_TERMINATION) - Bitrate handling reimplemented to fit new netlink API (IFLA_CAN_BITRATE) - CAN ID conversion refactored (changed from macro to inline functions) - CAN DLC handling using get_can_dlc() - Endianness handling for can_speed introduced - Debugging removed - Redundant error prints removed - Style/cosmetic corrections (i.e. macro names, redefs, inits etc.) Signed-off-by: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable TX FIFO Handling for M_CAN IP version >= v3.1.xMario Huettel1-29/+159
* Added defines for TX Event FIFO Element * Adapted ndo_start_xmit function. For versions >= v3.1.x it uses the TX FIFO to optimize the data throughput. It stores the echo skb at the same index as in the M_CAN's TX FIFO. The frame's message marker is set to this index. This message marker is received in the TX Event FIFO after the message was successfully transmitted. It is used to echo the correct echo skb back to the network stack. * Added m_can_echo_tx_event function. It reads all received message markers in the TX Event FIFO and loops back the corresponding echo skbs. * ISR checks for new TX Event Entry interrupt for version >= 3.1.x. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Configuration for TX and TX event FIFOsMario Huettel1-5/+34
* TX/TX Event FIFO sizes are configured for version >= v3.1.x Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable M_CAN version dependent initializationMario Huettel1-71/+269
This patch adapts the initialization of the M_CAN. So it can be used with all versions >= 3.0.x. Changes: * Added version element to m_can_priv structure to hold M_CAN version. * Renamed bittiming structs for version 3.0.x * Added new bittiming structs for version >= 3.1.x * Function alloc_m_can_dev takes 2 new arguments. The TX FIFO size and the base address of the module. * Chip configuration for CAN_CTRLMODE_LOOPBACK is changed: Enabled CCCR_MON bit. In combination with TEST_LBCK it activates the internal loopback mode. Leaving CCCR_MON '0' results in external loopback mode. * Clocks are temporarily enabled by platform_propbe function in order to allow read access to the Core Release register and the Control Register. Registers are used to detect M_CAN version and optional Non-ISO Feature. Initialization of M_CAN for version >= 3.1.x: * TX FIFO of M_CAN is used to transmit frames. The driver does not need to stop the tx queue after each frame sent. * Initialization of TX Event FIFO is added. * NON-ISO is fixed for all M_CAN versions < 3.2.x. Version 3.2.x _can_ have the NISO (Non-ISO) bit which can switch the mode of the M_CAN to Non-ISO mode. This bit does not have to be writeable. Therefore it is checked. If it is writable Non-ISO support is added to the controllers supported CAN modes. New Functions: * Function to check the Core Release version. The read value determines the behaviour of the driver. * Function to check if the NISO bit for version >= 3.2.x is implemented. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Updated register defines to newest versionMario Huettel1-65/+125
* Updated register defines to newest M_CAN version (v3.2.1). * Changed defines in the whole code. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed virtual address from printMario Huettel1-2/+2
The virtual address of the device was printed. I removed it because it leaks internal information. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed initialization of FIFO water marksMario Huettel1-2/+2
FIFO water marks disabled because the driver doesn't handle water mark events. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Disabled Interrupt Line 1Mario Huettel1-1/+2
* Disabled interrupt line 1. The driver didn't use it. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boardsStephane Grosjean8-0/+1783
This patch adds the support of the PCAN-PCI Express FD boards made by PEAK-System, for computers using the PCI Express slot. The PCAN-PCI Express FD has one or two CAN FD channels, depending on the model. A galvanic isolation of the CAN ports protects the electronics of the card and the respective computer against disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated with ambient temperatures in a range of -40 to +85 °C. Such boards run an extented version of the CAN-FD IP running into USB CAN-FD interfaces from PEAK-System, so this patch adds several new commands and their corresponding data types to the PEAK CAN-FD common definitions header file too. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: move header file to new can common subdirStephane Grosjean2-1/+1
The CAN-FD IP from PEAK-System runs into several kinds of PC CAN-FD interfaces. Up to now, only the USB CAN-FD adapters were supported by the Kernel. In order to prepare the adding of some new non-USB CAN-FD interfaces, this patch moves - and rename - the IP definitions file from its private (usb) sub-directory into a - newly created - CAN specific one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: fix usage of const qualifier in pointers argsStephane Grosjean1-8/+8
Fixes the usage of the const qualifier in the memory pointer arguments of the declared inline functions. By changing the line containing "const", this patch also changes the name of the arg into a more usual one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: fix usage of usb specific data typeStephane Grosjean2-14/+14
This patch fixes the wrong usage of a specific USB data type into a common header file. This common header file is intended to define the common data types and values that define access to the PEAK-System CAN-FD IP, whatever the PC interface is. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-24virtio-net: keep tx interrupts disabled unless kickWillem de Bruijn1-0/+3
Tx napi mode increases the rate of transmit interrupts. Suppress some by masking interrupts while more packets are expected. The interrupts will be reenabled before the last packet is sent. This optimization reduces the througput drop with tx napi for unidirectional flows such as UDP_STREAM that do not benefit from cleaning tx completions in the the receive napi handler. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: clean tx descriptors from rx napiWillem de Bruijn1-0/+21
Amortize the cost of virtual interrupts by doing both rx and tx work on reception of a receive interrupt if tx napi is enabled. With VIRTIO_F_EVENT_IDX, this suppresses most explicit tx completion interrupts for bidirectional workloads. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: move free_old_xmit_skbsWillem de Bruijn1-30/+30
An upcoming patch will call free_old_xmit_skbs indirectly from virtnet_poll. Move the function above this to avoid having to introduce a forward declaration. This is a pure move: no code changes. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: transmit napiWillem de Bruijn1-9/+67
Convert virtio-net to a standard napi tx completion path. This enables better TCP pacing using TCP small queues and increases single stream throughput. The virtio-net driver currently cleans tx descriptors on transmission of new packets in ndo_start_xmit. Latency depends on new traffic, so is unbounded. To avoid deadlock when a socket reaches its snd limit, packets are orphaned on tranmission. This breaks socket backpressure, including TSQ. Napi increases the number of interrupts generated compared to the current model, which keeps interrupts disabled as long as the ring has enough free descriptors. Keep tx napi optional and disabled for now. Follow-on patches will reduce the interrupt cost. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: napi helper functionsWillem de Bruijn1-30/+35
Prepare virtio-net for tx napi by converting existing napi code to use helper functions. This also deduplicates some logic. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24sparc64: Improve 64-bit constant loading in eBPF JIT.David S. Miller1-4/+245
Doing a full 64-bit decomposition is really stupid especially for simple values like 0 and -1. But if we are going to optimize this, go all the way and try for all 2 and 3 instruction sequences not requiring a temporary register as well. First we do the easy cases where it's a zero or sign extended 32-bit number (sethi+or, sethi+xor, respectively). Then we try to find a range of set bits we can load simply then shift up into place, in various ways. Then we try negating the constant and see if we can do a simple sequence using that with a xor at the end. (f.e. the range of set bits can't be loaded simply, but for the negated value it can) The final optimized strategy involves 4 instructions sequences not needing a temporary register. Otherwise we sadly fully decompose using a temp.. Example, from ALU64_XOR_K: 0x0000ffffffff0000 ^ 0x0 = 0x0000ffffffff0000: 0000000000000000 <foo>: 0: 9d e3 bf 50 save %sp, -176, %sp 4: 01 00 00 00 nop 8: 90 10 00 18 mov %i0, %o0 c: 13 3f ff ff sethi %hi(0xfffffc00), %o1 10: 92 12 63 ff or %o1, 0x3ff, %o1 ! ffffffff <foo+0xffffffff> 14: 93 2a 70 10 sllx %o1, 0x10, %o1 18: 15 3f ff ff sethi %hi(0xfffffc00), %o2 1c: 94 12 a3 ff or %o2, 0x3ff, %o2 ! ffffffff <foo+0xffffffff> 20: 95 2a b0 10 sllx %o2, 0x10, %o2 24: 92 1a 60 00 xor %o1, 0, %o1 28: 12 e2 40 8a cxbe %o1, %o2, 38 <foo+0x38> 2c: 9a 10 20 02 mov 2, %o5 30: 10 60 00 03 b,pn %xcc, 3c <foo+0x3c> 34: 01 00 00 00 nop 38: 9a 10 20 01 mov 1, %o5 ! 1 <foo+0x1> 3c: 81 c7 e0 08 ret 40: 91 eb 40 00 restore %o5, %g0, %o0 Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.