Age | Commit message (Collapse) | Author | Files | Lines |
|
fseeko(.., 0, SEEK_SET) on a memstream just puts the buffer pointer
to the beginning so when we call fflush on it we get some garbage
log data from the previous test. Let's manually set terminating
byte to zero at the reported buffer size.
To show the issue consider the following snippet:
stream = open_memstream (&buf, &len);
fprintf(stream, "aaa");
fflush(stream);
printf("buf=%s, len=%zu\n", buf, len);
fseeko(stream, 0, SEEK_SET);
fprintf(stream, "b");
fflush(stream);
printf("buf=%s, len=%zu\n", buf, len);
Output:
buf=aaa, len=3
buf=baa, len=1
Fixes: 946152b3c5d6 ("selftests/bpf: test_progs: switch to open_memstream")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The addition of unaligned chunks mode, the documentation needs to be
updated to indicate that the incoming addr to the fill ring will only be
masked if the user application is run in the aligned chunk mode. This patch
also adds a line to explicitly indicate that the incoming addr will not be
masked if running the user application in the unaligned chunk mode.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch modifies xdpsock to use mmap instead of posix_memalign. With
this change, we can use hugepages when running the application in unaligned
chunks mode. Using hugepages makes it more likely that we have physically
contiguous memory, which supports the unaligned chunk mode better.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch adds buffer recycling support for unaligned buffers. Since we
don't mask the addr to 2k at umem_reg in unaligned mode, we need to make
sure we give back the correct (original) addr to the fill queue. We achieve
this using the new descriptor format and associated masks. The new format
uses the upper 16-bits for the offset and the lower 48-bits for the addr.
Since we have a field for the offset, we no longer need to modify the
actual address. As such, all we have to do to get back the original address
is mask for the lower 48 bits (i.e. strip the offset and we get the address
on it's own).
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch adds support for the unaligned chunks mode. The addition of the
unaligned chunks option will allow users to run the application with more
relaxed chunk placement in the XDP umem.
Unaligned chunks mode can be used with the '-u' or '--unaligned' command
line options.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch adds a 'flags' field to the umem_config and umem_reg structs.
This will allow for more options to be added for configuring umems.
The first use for the flags field is to add a flag for unaligned chunks
mode. These flags can either be user-provided or filled with a default.
Since we change the size of the xsk_umem_config struct, we need to version
the ABI. This patch includes the ABI versioning for xsk_umem__create. The
Makefile was also updated to handle multiple function versions in
check-abi.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Relax the requirements to the XSK frame size to allow it to be smaller
than a page and even not a power of two. The current implementation can
work in this mode, both with Striding RQ and without it.
The code that checks `mtu + headroom <= XSK frame size` is modified
accordingly. Any frame size between 2048 and PAGE_SIZE is accepted.
Functions that worked with pages only now work with XSK frames, even if
their size is different from PAGE_SIZE.
With XSK queues, regardless of the frame size, Striding RQ uses the
stride size of PAGE_SIZE, and UMR MTTs are posted using starting
addresses of frames, but PAGE_SIZE as page size. MTU guarantees that no
packet data will overlap with other frames. UMR MTT size is made equal
to the stride size of the RQ, because UMEM frames may come in random
order, and we need to handle them one by one. PAGE_SIZE is just a power
of two that is bigger than any allowed XSK frame size, and also it
doesn't require making additional changes to the code.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
With the addition of the unaligned chunks option, we need to make sure we
handle the offsets accordingly based on the mode we are currently running
in. This patch modifies the driver to appropriately mask the address for
each case.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
With the addition of the unaligned chunks option, we need to make sure we
handle the offsets accordingly based on the mode we are currently running
in. This patch modifies the driver to appropriately mask the address for
each case.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
With the addition of the unaligned chunks option, we need to make sure we
handle the offsets accordingly based on the mode we are currently running
in. This patch modifies the driver to appropriately mask the address for
each case.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, addresses are chunk size aligned. This means, we are very
restricted in terms of where we can place chunk within the umem. For
example, if we have a chunk size of 2k, then our chunks can only be placed
at 0,2k,4k,6k,8k... and so on (ie. every 2k starting from 0).
This patch introduces the ability to use unaligned chunks. With these
changes, we are no longer bound to having to place chunks at a 2k (or
whatever your chunk size is) interval. Since we are no longer dealing with
aligned chunks, they can now cross page boundaries. Checks for page
contiguity have been added in order to keep track of which pages are
followed by a physically contiguous page.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, the dma, addr and handle are modified when we reuse Rx buffers
in zero-copy mode. However, this is not required as the inputs to the
function are copies, not the original values themselves. As we use the
copies within the function, we can use the original 'obi' values
directly without having to mask and add the headroom.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, the dma, addr and handle are modified when we reuse Rx buffers
in zero-copy mode. However, this is not required as the inputs to the
function are copies, not the original values themselves. As we use the
copies within the function, we can use the original 'old_bi' values
directly without having to mask and add the headroom.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch fix a spelling typo in test_offload.py
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
If a SYN cookie is not issued by tcp_v#_gen_syncookie, then the return
value will be exactly 0, rather than <= 0. Let's change the check to
reflect that, especially since mss is an unsigned value and cannot be
negative.
Fixes: 70d66244317e ("bpf: add bpf_tcp_gen_syncookie helper")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Petar Penkov <ppenkov@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Each get_next and lookup call requires a round trip to the device.
However, the device is capable of giving us a few entries back,
instead of just one.
In this patch we ask for a small yet reasonable number of entries
(4) on every get_next call, and on subsequent get_next/lookup calls
check this little cache for a hit. The cache is only kept for 250us,
and is invalidated on every operation which may modify the map
(e.g. delete or update call). Note that operations may be performed
simultaneously, so we have to keep track of operations in flight.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
If control channel MTU is too low to support map operations a warning
will be printed. This is not enough, we want to make sure probe fails
in such scenario, as this would clearly be a faulty configuration.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
In bpftool's Makefile, $(LIBS) includes $(LIBBPF), therefore the library
is used twice in the linking command. No need to have $(LIBBPF) (from
$^) on that command, let's do with "$(OBJS) $(LIBS)" (but move $(LIBBPF)
_before_ the -l flags in $(LIBS)).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When building "tools/bpf" from the top of the Linux repository, the
build system passes a value for the $(OUTPUT) Makefile variable to
tools/bpf/Makefile and tools/bpf/bpftool/Makefile, which results in
generating "libbpf/" (for bpftool) and "feature/" (bpf and bpftool)
directories inside the tree.
This commit adds such directories to the relevant .gitignore files, and
edits the Makefiles to ensure they are removed on "make clean". The use
of "rm" is also made consistent throughout those Makefiles (relies on
the $(RM) variable, use "--" to prevent interpreting
$(OUTPUT)/$(DESTDIR) as options.
v2:
- New patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There are a number of alternative "make" invocations that can be used to
compile bpftool. The following invocations are expected to work:
- through the kbuild system, from the top of the repository
(make tools/bpf)
- by telling make to change to the bpftool directory
(make -C tools/bpf/bpftool)
- by building the BPF tools from tools/
(cd tools && make bpf)
- by running make from bpftool directory
(cd tools/bpf/bpftool && make)
Additionally, setting the O or OUTPUT variables should tell the build
system to use a custom output path, for each of these alternatives.
The following patch fixes the following invocations:
$ make tools/bpf
$ make tools/bpf O=<dir>
$ make -C tools/bpf/bpftool OUTPUT=<dir>
$ make -C tools/bpf/bpftool O=<dir>
$ cd tools/ && make bpf O=<dir>
$ cd tools/bpf/bpftool && make OUTPUT=<dir>
$ cd tools/bpf/bpftool && make O=<dir>
After this commit, the build still fails for two variants when passing
the OUTPUT variable:
$ make tools/bpf OUTPUT=<dir>
$ cd tools/ && make bpf OUTPUT=<dir>
In order to remember and check what make invocations are supposed to
work, and to document the ones which do not, a new script is added to
the BPF selftests. Note that some invocations require the kernel to be
configured, so the script skips them if no .config file is found.
v2:
- In make_and_clean(), set $ERROR to 1 when "make" returns non-zero,
even if the binary was produced.
- Run "make clean" from the correct directory (bpf/ instead of bpftool/,
when relevant).
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Bpftool calls the toplevel Makefile to get the kernel version for the
sources it is built from. But when the utility is built from the top of
the kernel repository, it may dump the following error message for
certain architectures (including x86):
$ make tools/bpf
[...]
make[3]: *** [checkbin] Error 1
[...]
This does not prevent bpftool compilation, but may feel disconcerting.
The "checkbin" arch-dependent target is not supposed to be called for
target "kernelversion", which is a simple "echo" of the version number.
It turns out this is caused by the make invocation in tools/bpf/bpftool,
which attempts to find implicit rules to apply. Extract from debug
output:
Reading makefiles...
Reading makefile 'Makefile'...
Reading makefile 'scripts/Kbuild.include' (search path) (no ~ expansion)...
Reading makefile 'scripts/subarch.include' (search path) (no ~ expansion)...
Reading makefile 'arch/x86/Makefile' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kcov' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.gcc-plugins' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kasan' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.extrawarn' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.ubsan' (search path) (no ~ expansion)...
Updating makefiles....
Considering target file 'scripts/Makefile.ubsan'.
Looking for an implicit rule for 'scripts/Makefile.ubsan'.
Trying pattern rule with stem 'Makefile.ubsan'.
[...]
Trying pattern rule with stem 'Makefile.ubsan'.
Trying implicit prerequisite 'scripts/Makefile.ubsan.o'.
Looking for a rule with intermediate file 'scripts/Makefile.ubsan.o'.
Avoiding implicit rule recursion.
Trying pattern rule with stem 'Makefile.ubsan'.
Trying rule prerequisite 'prepare'.
Trying rule prerequisite 'FORCE'.
Found an implicit rule for 'scripts/Makefile.ubsan'.
Considering target file 'prepare'.
File 'prepare' does not exist.
Considering target file 'prepare0'.
File 'prepare0' does not exist.
Considering target file 'archprepare'.
File 'archprepare' does not exist.
Considering target file 'archheaders'.
File 'archheaders' does not exist.
Finished prerequisites of target file 'archheaders'.
Must remake target 'archheaders'.
Putting child 0x55976f4f6980 (archheaders) PID 31743 on the chain.
To avoid that, pass the -r and -R flags to eliminate the use of make
built-in rules (and while at it, built-in variables) when running
command "make kernelversion" from bpftool's Makefile.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This adds support for bpf-to-bpf function calls in the s390 JIT
compiler. The JIT compiler converts the bpf call instructions to
native branch instructions. After a round of the usual passes, the
start addresses of the JITed images for the callee functions are
known. Finally, to fixup the branch target addresses, we need to
perform an extra pass.
Because of the address range in which JITed images are allocated on
s390, the offsets of the start addresses of these images from
__bpf_call_base are as large as 64 bits. So, for a function call,
the imm field of the instruction cannot be used to determine the
callee's address. Use bpf_jit_get_func_addr() helper instead.
The patch borrows a lot from:
commit 8c11ea5ce13d ("bpf, arm64: fix getting subprog addr from aux
for calls")
commit e2c95a61656d ("bpf, ppc64: generalize fetching subprog into
bpf_jit_get_func_addr")
commit 8484ce8306f9 ("bpf: powerpc64: add JIT support for
multi-function programs")
(including the commit message).
test_verifier (5.3-rc6 with CONFIG_BPF_JIT_ALWAYS_ON=y):
without patch:
Summary: 1501 PASSED, 0 SKIPPED, 47 FAILED
with patch:
Summary: 1540 PASSED, 0 SKIPPED, 8 FAILED
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
.nhoff = 0 is (correctly) reset to ETH_HLEN on the next line so let's
drop it.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
send_signal test returns static codes from the subtests which
nobody looks at, let's rely on the CHECK macros instead.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Otherwise they can bring the whole process down.
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Now that we have a global per-test/per-environment state, there
is no longer need to have global fail/success counters (and there
is no need to save/get the diff before/after the test).
Introduce CHECK_FAIL macro (suggested by Andrii) and covert existing tests
to it. CHECK_FAIL uses new test__fail() to record the failure.
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Export test__skip() to indicate skipped tests and use it in
test_send_signal_nmi().
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Copy-paste of existing test
"calls: cross frame pruning - liveness propagation"
but ran with different parentage chain heuristic
which stresses different path in precision tracking logic.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use BPF_F_TEST_STATE_FREQ flag to check that precision
tracking works as expected by comparing every step it takes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
sync bpf.h from kernel/ to tools/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Introduce BPF_F_TEST_STATE_FREQ flag to stress test parentage chain
and state pruning.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a new subcommand to freeze maps from user space.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When listing maps, read their "frozen" status from procfs, and tell if
maps are frozen.
As commit log for map freezing command mentions that the feature might
be extended with flags (e.g. for write-only instead of read-only) in the
future, use an integer and not a boolean for JSON output.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Fix a 'struct pt_reg' typo and clarify when bpf_trace_printk discards
lines. Affects documentation only.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
I opened /sys/kernel/tracing/trace once and kept reading from it.
bpf_trace_printk somehow did not seem to work, no entries were appended
to that trace file. It turns out that tracing is disabled when that file
is open. Save the next person some time and document this.
The trace file is described in Documentation/trace/ftrace.rst, however
the implication "tracing is disabled" did not immediate translate to
"bpf_trace_printk silently discards entries".
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is no 'struct pt_reg'.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
PERF_EVENT_IOC_SET_BPF supports uprobes since v4.3, and tracepoints
since v4.7 via commit 04a22fae4cbc ("tracing, perf: Implement BPF
programs attached to uprobes"), and commit 98b5c2c65c29 ("perf, bpf:
allow bpf programs attach to tracepoints") respectively.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Building s390 kernel with CONFIG_DEBUG_INFO_BTF fails, because
CONFIG_OUTPUT_FORMAT is not defined. As a matter of fact, this variable
appears to be x86-only, so other arches might be affected as well.
Fix by obtaining this value from objdump output, just like it's already
done for bin_arch. The exact objdump invocation is "inspired" by
arch/powerpc/boot/wrapper.
Also, use LANG=C for the existing bin_arch objdump invocation to avoid
potential build issues on systems with non-English locale.
Fixes: 341dfcf8d78e ("btf: expose BTF info through sysfs")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
For arm32 xdp sockets mmap2 is preferred, so use it if it's defined.
Declaration of __NR_mmap can be skipped and it breaks build.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
For 64-bit there is no reason to use vmap/vunmap, so use page_address
as it was initially. For 32 bits, in some apps, like in samples
xdpsock_user.c when number of pgs in use is quite big, the kmap
memory can be not enough, despite on this, kmap looks like is
deprecated in such cases as it can block and should be used rather
for dynamic mm.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Drop __NR_mmap2 fork in flavor of LFS, that is _FILE_OFFSET_BITS=64
(glibc & bionic) / LARGEFILE64_SOURCE (for musl) decision. It allows
mmap() to use 64bit offset that is passed to mmap2 syscall. As result
pgoff is not truncated and no need to use direct access to mmap2 for
32 bits systems.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a "btf list" (alias: "btf show") subcommand to bpftool in order to
dump all BTF objects loaded on a system.
When running the command, hash tables are built in bpftool to retrieve
all the associations between BTF objects and BPF maps and programs. This
allows for printing all such associations when listing the BTF objects.
The command is added at the top of the subcommands for "bpftool btf", so
that typing only "bpftool btf" also comes down to listing the programs.
We could not have this with the previous command ("dump"), which
required a BTF object id, so it should not break any previous behaviour.
This also makes the "btf" command behaviour consistent with "prog" or
"map".
Bash completion is updated to use "bpftool btf" instead of "bpftool
prog" to list the BTF ids, as it looks more consistent.
Example output (plain):
# bpftool btf show
9: size 2989B prog_ids 21 map_ids 15
17: size 2847B prog_ids 36 map_ids 30,29,28
26: size 2847B
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add an API function taking a BTF object id and providing the id of the
next BTF object in the kernel. This can be used to list all BTF objects
loaded on the system.
v2:
- Rebase on top of Andrii's changes regarding libbpf versioning.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In preparation for the introduction of a similar function for retrieving
the id of the next BTF object, consolidate the code from
bpf_prog_get_next_id() and bpf_map_get_next_id() in libbpf.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Synchronise the bpf.h header under tools, to report the addition of the
new BPF_BTF_GET_NEXT_ID syscall command for bpf().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new command for the bpf() system call: BPF_BTF_GET_NEXT_ID is used
to cycle through all BTF objects loaded on the system.
The motivation is to be able to inspect (list) all BTF objects presents
on the system.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
r369217 in clang added a new warning about potential misuse of the xor
operator as an exponentiation operator:
../lib/test_bpf.c:870:13: warning: result of '10 ^ 300' is 294; did you
mean '1e300'? [-Wxor-used-as-pow]
{ { 4, 10 ^ 300 }, { 20, 10 ^ 300 } },
~~~^~~~~
1e300
../lib/test_bpf.c:870:13: note: replace expression with '0xA ^ 300' to
silence this warning
../lib/test_bpf.c:870:31: warning: result of '10 ^ 300' is 294; did you
mean '1e300'? [-Wxor-used-as-pow]
{ { 4, 10 ^ 300 }, { 20, 10 ^ 300 } },
~~~^~~~~
1e300
../lib/test_bpf.c:870:31: note: replace expression with '0xA ^ 300' to
silence this warning
The commit link for this new warning has some good logic behind wanting
to add it but this instance appears to be a false positive. Adopt its
suggestion to silence the warning but not change the code. According to
the differential review link in the clang commit, GCC may eventually
adopt this warning as well.
Link: https://github.com/ClangBuiltLinux/linux/issues/643
Link: https://github.com/llvm/llvm-project/commit/920890e26812f808a74c60ebc14cc636dac661c1
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a header include guard just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Implement the show_fdinfo hook for BTF FDs file operations, and make it
print the id of the BTF object. This allows for a quick retrieval of the
BTF id from its FD; or it can help understanding what type of object
(BTF) the file descriptor points to.
v2:
- Do not expose data_size, only btf_id, in FD info.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|