aboutsummaryrefslogtreecommitdiffstats
path: root/Kconfig (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2012-06-19inet: Sanitize inet{,6} protocol demux.David S. Miller9-47/+36
Don't pretend that inet_protos[] and inet6_protos[] are hashes, thay are just a straight arrays. Remove all unnecessary hash masking. Document MAX_INET_PROTOS. Use RAW_HTABLE_SIZE when appropriate. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: use module_usb_driver macroBjørn Mork1-11/+1
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: shorten driver descriptionBjørn Mork1-2/+2
The description is used in ethtool fixed length fields. Make it shorter to avoid truncation. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: bind to both control and data interfaceBjørn Mork1-68/+63
Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: rearranging to prepare for code sharingBjørn Mork1-52/+76
Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: define a structure for driver specific stateBjørn Mork1-20/+29
usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: use rcu_dereference_bh() in tx pathJiri Pirko2-4/+4
Should be used instead of rcu_dereference, since rcu_read_lock_bh is held. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow to send multiple set events in one messageJiri Pirko1-24/+9
When multiple sets are done, event message is generated for each. This patch accumulates these messages into one. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: ensure correct order of netlink messages deliveryJiri Pirko1-20/+5
currently, when port is created and per-port options are present, there options are sent to userspace with ifindex of port which userspace does not know about. Port add message goes right after. This patch corrects message ordering so userspace would not be confused. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: implement multipart netlink messages for options transfersJiri Pirko1-82/+116
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: lb: introduce infrastructure for userspace driven tx loadbalancingJiri Pirko1-17/+500
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: add port_[enabled/disabled] mode callbacksJiri Pirko2-0/+6
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: pass NULL to __team_option_inst_add() instead of 0Jiri Pirko1-1/+1
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow to specify one option instance to be send to userspaceJiri Pirko1-86/+124
No need to walk through option instance list and look for ->changed == true when called knows exactly what one option instance changed. Also use lists to pass option instances needed to be present in netlink message. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: fix error path in team_nl_fill_port_list_get()Jiri Pirko1-1/+1
genlmsg_cancel() needs to be called in case nest fails Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: fix error path in team_nl_fill_options_get()Jiri Pirko1-1/+1
genlmsg_cancel() needs to be called in case nest fails Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow async option changesJiri Pirko2-0/+21
This patch adds two exported functions. One allows to mark option instance as changed and the second processes change check and does transfer of changed options to userspace. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: push array_index and port into separate structureJiri Pirko2-27/+50
Introduce struct team_option_inst_info and push option instance info there. It can be then easily passed to gsetter context and used for feature async option changes. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: comments: s/net\/drivers\/team/drivers\/net\/team/Jiri Pirko3-3/+3
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: introduce array optionsJiri Pirko2-23/+55
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow read/write-only optionsJiri Pirko1-0/+4
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: lb: push hash counting into separate functionJiri Pirko1-7/+16
Also squash hash into one byte Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: add mode priv to portJiri Pirko2-1/+4
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: for nomode use dummy struct team_modeJiri Pirko1-8/+21
That leaves team->mode and all its values valid so no checks would be needed (for example in team_mode_option_get()). Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: make team_mode struct constJiri Pirko5-23/+43
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Change date and version to 1.72.51-0Merav Sicron1-2/+2
This change updates the date and version of the bnx2x driver. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Support DCBX for all functionsBarak Witkowski7-12/+31
In multi-function device, allow configuring dcbx admin params from all drivers on a single physical port. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for ethtool -LMerav Sicron5-12/+100
Add support for ethtool -L/-l for setting and getting the number of RSS queues. The 'combined' field is used as we don't support separate IRQ for Rx and Tx. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Allow up to 63 RSS queuesMerav Sicron1-10/+3
This patch removed the limitation in the code for 16 RSS queues. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Split the FP structureBarak Witkowski6-87/+155
This patch moves some fields out of the FP structure to different structures, in order to minimize size of contigiuous memory allocated. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Move the CNIC L2 CIDs to be right after the RSS CIDsMerav Sicron4-30/+52
Currently the CNIC-related L2 CIDs (for sending control FCoE / iSCSI packets) were at fixed position, according to the maximal number of RSS queues multiplied by the number of traffic-classes. This change makes the CIDs dynamic, as they are defined to be right after the highest RSS CID. This decreases the memory allocated for the context. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Make the transmission queues adjacentMerav Sicron6-94/+139
In the current scheme the transmission queues of traffic-class 0 were 0-15, the transmission queues of traffic-class 1 were 16-31 and so on. If the number of RSS queues was smaller than 16, there were gaps in transmission queues numbering, as well as in CIDs numbering. This is both a waste (especially when 16 is increased to 64), and may causes problems with flushing queues when reducing the number of RSS queues (using ethtool -L). The new scheme eliminates the gaps. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Allow more than 64 L2 CIDsMerav Sicron2-20/+57
With increased number of RSS queues, each multiplied by the number of traffic- classes, we may have up to 64*3=192 CIDs. The current driver scheme with regard to context allocation supports only 64 CIDs. The new scheme enables scatter- gatehr list of pages for the context. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for 4-tupple UDP RSSMerav Sicron5-15/+159
This change enables to control via ethtool whether to do UDP RSS on 2-tupple (IP source / destination only) or on 4-tupple (include UDP source / destination port). It also enables to read back the RSS configuration. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Return only online tests for MFMerav Sicron2-29/+62
1. In multi-function device, show only the online tests in self-test results as only these test are performed (offline tests cannot be performed as they may corrupt the traffic of other functions on the same physical port). Note that multi-function mode cannot change while the driver is up. 2. Check result code in NIC load and act accordingly. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for external LBMerav Sicron4-9/+81
This change enables to do self-test with external loopback via ethtool. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19canfd: update documentation according to CAN FD extensionsOliver Hartkopp1-8/+146
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-19vcan: add CAN FD supportOliver Hartkopp1-7/+20
- move the length calculation from dlc to real length (using canfd_frame) - allow to switch the driver between CAN and CAN FD (change of MTU) Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-19candev: add/update helpers for CAN FDOliver Hartkopp2-9/+59
- update sanity checks - add DLC to length conversion helpers - can_dlc2len() - get data length from can_dlc with sanitized can_dlc - can_len2dlc() - map the sanitized data length to an appropriate DLC Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-19canfd: add support for CAN FD in CAN_RAW socketsOliver Hartkopp2-5/+48
- introduce a new sockopt CAN_RAW_FD_FRAMES to allow CAN FD frames - handle CAN frames and CAN FD frames simultaneously when enabled Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-19canfd: add support for CAN FD in PF_CAN coreOliver Hartkopp2-29/+84
- handle ETH_P_CAN and ETH_P_CANFD skbuffs - update sanity checks for CAN and CAN FD - make sure the CAN frame can pass the selected CAN netdevice on send - bump core version and abi version to indicate the new CAN FD support Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-19canfd: add new data structures and constantsOliver Hartkopp3-6/+63
- add new struct canfd_frame - check identical element offsets in struct can_frame and struct canfd_frame - new ETH_P_CANFD definition to tag CAN FD skbs correctly - add CAN_MTU and CANFD_MTU definitions for easy frame and mode detection - add CAN[FD]_MAX_[DLC|DLEN] helper constants to remove hard coded values - update existing struct can_frame with helper constants and comments Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-19c_can_pci: generic module for C_CAN/D_CAN on PCIFederico Vaga3-0/+244
Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Bhupesh Sharma <bhupesh.sharma@st.com> [mkl: fix call to pci_iounmap] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-19net: lpc_eth: Driver cleanupstigge@antcom.de1-5/+1
This patch removes some nowadays superfluous definitions (one unused define and an obsolete function forward declaration) and corrects a netdev_err() to netdev_dbg(). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-18netfilter: fix missing symbols if CONFIG_NETFILTER_NETLINK_QUEUE_CT unsetPablo Neira Ayuso1-1/+1
ERROR: "nfqnl_ct_parse" [net/netfilter/nfnetlink_queue.ko] undefined! ERROR: "nfqnl_ct_seq_adjust" [net/netfilter/nfnetlink_queue.ko] undefined! ERROR: "nfqnl_ct_put" [net/netfilter/nfnetlink_queue.ko] undefined! ERROR: "nfqnl_ct_get" [net/netfilter/nfnetlink_queue.ko] undefined! We have to use CONFIG_NETFILTER_NETLINK_QUEUE_CT in include/net/netfilter/nfnetlink_queue.h, not CONFIG_NF_CONNTRACK. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19netfilter: nfnetlink_queue: fix compilation with NF_CONNTRACK disabledPablo Neira Ayuso6-47/+164
In "9cb0176 netfilter: add glue code to integrate nfnetlink_queue and ctnetlink" the compilation with NF_CONNTRACK disabled is broken. This patch fixes this issue. I have moved the conntrack part into nfnetlink_queue_ct.c to avoid peppering the entire nfnetlink_queue.c code with ifdefs. I also needed to rename nfnetlink_queue.c to nfnetlink_queue_pkt.c to update the net/netfilter/Makefile to support conditional compilation of the conntrack integration. This patch also adds CONFIG_NETFILTER_QUEUE_CT in case you want to explicitly disable the integration between nf_conntrack and nfnetlink_queue. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-19netfilter: fix compilation of the nfnl_cthelper if NF_CONNTRACK is unsetPablo Neira Ayuso2-9/+13
This patch fixes the compilation of net/netfilter/nfnetlink_cthelper.c if CONFIG_NF_CONNTRACK is not set. This patch also moves the definition of the cthelper infrastructure to the scope of NF_CONNTRACK things. I have also renamed NETFILTER_NETLINK_CTHELPER by NF_CT_NETLINK_HELPER, to use similar names to other nf_conntrack_netlink extensions. Better now that this has been only for two days in David's tree. Two new dependencies have been added: * NF_CT_NETLINK * NETFILTER_NETLINK_QUEUE Since these infrastructure requires both ctnetlink and nfqueue. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-19netfilter: nf_ct_helper: disable automatic helper re-assignment of different typePablo Neira Ayuso1-1/+7
This patch modifies __nf_ct_try_assign_helper in a way that invalidates support for the following scenario: 1) attach the helper A for first time when the conntrack is created 2) attach new (different) helper B due to changes the reply tuple caused by NAT eg. port redirection from TCP/21 to TCP/5060 with both FTP and SIP helpers loaded, which seems to be a quite unorthodox scenario. I can provide a more elaborated patch to support this scenario but explicit helper attachment provides a better solution for this since now the use can attach the helpers consistently, without relying on the automatic helper lookup magic. This patch fixes a possible out of bound zeroing of the conntrack helper extension if the helper B uses more memory for its private data than helper A. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-19netfilter: ctnetlink: fix NULL dereference while trying to change helperPablo Neira Ayuso1-10/+3
The patch 1afc56794e03: "netfilter: nf_ct_helper: implement variable length helper private data" from Jun 7, 2012, leads to the following Smatch complaint: net/netfilter/nf_conntrack_netlink.c:1231 ctnetlink_change_helper() error: we previously assumed 'help->helper' could be null (see line 1228) This NULL dereference can be triggered with the following sequence: 1) attach the helper for first time when the conntrack is created. 2) remove the helper module or detach the helper from the conntrack via ctnetlink. 3) attach helper again (the same or different one, no matter) to the that existing conntrack again via ctnetlink. This patch fixes the problem by removing the use case that allows you to re-assign again a helper for one conntrack entry via ctnetlink since I cannot find any practical use for it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-06-18batman-adv: only store changed gw_bandwidth valuesMarek Lindner1-0/+3
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.