| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Linux 5.4-rc5
For dependencies in the next patches
Conflict resolved by keeping the delete of the unlock.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes:
- Fix VDSO time-related function behavior for systems where we need
to fall back to syscalls, but were instead returning bogus results.
- A fix to TLB exception handlers for Cavium Octeon systems where
they would inadvertently clobber the $1/$at register.
- A build fix for bcm63xx configurations.
- Switch to using my @kernel.org email address"
* tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: tlbex: Fix build_restore_pagemask KScratch restore
MIPS: bmips: mark exception vectors as char arrays
mips: vdso: Fix __arch_get_hw_counter()
MAINTAINERS: Use @kernel.org address for Paul Burton
|
|
Pull ARM SoC fixes from Olof Johansson:
"A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc
no-watchdog regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA),
Allwinner (phy regulators, PMU removal on A64, etc)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
MAINTAINERS: Update the Spreadtrum SoC maintainer
MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
bus: ti-sysc: Fix watchdog quirk handling
ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
mailmap: Add Simon Arlott (replacement for expired email address)
arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
...
|
|
This pull request contains MAINTAINERS file updates for Broadcom SoCs
for the 5.5 kernel, please pull the following:
- Simon adds a .mailmap alias for his old email
- Stefan updates the existing BCM2835 with BCM2711 which is the chip
name for the Raspberry Pi 4
- Florian removes Gregory and Brian from the MAINTAINERS file for
BRCMSTB SoCs
* tag 'arm-soc/for-5.5/maintainers' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
mailmap: Add Simon Arlott (replacement for expired email address)
MAINTAINERS: Add BCM2711 to BCM2835 ARCH
Link: https://lore.kernel.org/r/20191023212814.30622-3-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Change my email address, and add more Spreadtrum SC27xx series PMIC
drivers to maintain.
Link: https://lore.kernel.org/r/a48483d13243450ecf3b777d49e741b6367f2c6b.1571881956.git.baolin.wang@linaro.org
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The last time Gregory and Brian did a review was sometime around 2015,
since then, they have not been active for ARCH_BRCMSTB changes.
Following the position of other maintainers and Harald Welte's position
here:
[1] http://laforge.gnumonks.org/blog/20180307-mchardy-gpl/
remove both of them.
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
From Yamin Friedman:
====================
This series from Yamin implements long standing "TODO" existed in rw.c. It
allows the driver to specify a cut-over point where it is faster to build
a lkey MR rather than do a large SGL for RDMA READ operations.
mlx5 HW gets a notable performane boost by switching to MRs.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'mlx5-rd-sgl': (3 commits)
RDMA/mlx5: Add capability for max sge to get optimized performance
RDMA/rw: Support threshold for registration vs scattering to local pages
net/mlx5: Expose optimal performance scatter entries capability
|
|
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
|
|
Switch to using my paulburton@kernel.org email address in order to avoid
subject mangling that's being imposed on my previous address.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-kernel@vger.kernel.org
|
|
Update maintainers for MediaTek ethernet driver with Mark Lee.
He is familiar with MediaTek mt762x series ethernet devices and
will keep following maintenance from the vendor side.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull SCSI fixes from James Bottomley:
"Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
(qla2xxx) and two in the core.
The last two are mostly about removing incorrect messages from the
kernel log: the resid message is definitely wrong and the sync cache
on protected drive problem is arguably wrong"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Update qla2xxx driver
scsi: zfcp: fix reaction on bit error threshold notification
scsi: core: save/restore command resid for error handling
scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
scsi: sd: Ignore a failure to sync cache due to lack of authorization
|
|
Use my kernel.org address for all entries in MAINTAINERS.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull parisc fixes from Helge Deller:
- Fix a parisc-specific fallout of Christoph's
dma_set_mask_and_coherent() patches (Sven)
- Fix a vmap memory leak in ioremap()/ioremap() (Helge)
- Some minor cleanups and documentation updates (Nick, Helge)
* 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove 32-bit DMA enforcement from sba_iommu
parisc: Fix vmap memory leak in ioremap()/iounmap()
parisc: prefer __section from compiler_attributes.h
parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define
MAINTAINERS: Add hp_sdc drivers to parisc arch
|
|
Pull USB fixes from Greg KH:
"Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for
years as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues"
* tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
USB: yurex: fix NULL-derefs on disconnect
USB: iowarrior: use pr_err()
USB: iowarrior: drop redundant iowarrior mutex
USB: iowarrior: drop redundant disconnect mutex
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: chaoskey: fix use-after-free on release
USB: adutux: fix use-after-free on release
USB: ldusb: fix NULL-derefs on driver unbind
USB: legousbtower: fix use-after-free on release
usb: cdns3: Fix for incorrect DMA mask.
usb: cdns3: fix cdns3_core_init_role()
usb: cdns3: gadget: Fix full-speed mode
USB: usb-skeleton: drop redundant in-urb check
USB: usb-skeleton: fix use-after-free after driver unbind
USB: usb-skeleton: fix NULL-deref on disconnect
usb:cdns3: Fix for CV CH9 running with g_zero driver.
usb: dwc3: Remove dev_err() on platform_get_irq() failure
usb: dwc3: Switch to platform_get_irq_byname_optional()
...
|
|
Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.
Most importantly, it fixes a namespace-related modpost issue for
external module builds
- Fix broken external module builds due to a modpost bug in
read_dump(), where the namespace was not being strdup'd and
sym->namespace would be set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada"
* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
doc: move namespaces.rst from kbuild/ to core-api/
nsdeps: make generated patches independent of locale
nsdeps: fix hashbang of scripts/nsdeps
kbuild: fix build error of 'make nsdeps' in clean tree
module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
modpost: fix broken sym->namespace for external module builds
module: swap the order of symbol.namespace
scripts: add_namespace: Fix coccicheck failed
|
|
Clarify that BCM2711 belongs to the BCM2835 ARCH.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
|
|
At the end of the v5.3 upstream kernel development cycle, Simon stepped
down from his role as Renesas SoC maintainer.
Remove his maintainership, git repository, and branch from the
MAINTAINERS file, and add an entry to the CREDITS file to honor his
work.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull LED fixes from Jacek Anaszewski:
- fix a leftover from earlier stage of development in the documentation
of recently added led_compose_name() and fix old mistake in the
documentation of led_set_brightness_sync() parameter name.
- MAINTAINERS: add pointer to Pavel Machek's linux-leds.git tree.
Pavel is going to take over LED tree maintainership from myself.
* tag 'led-fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
Add my linux-leds branch to MAINTAINERS
leds: core: Fix leds.h structure documentation
|
|
Add pointer to my git tree to MAINTAINERS. I'd like to maintain
linux-leds for-next branch for 5.5.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
We discussed a better location for this file, and agreed that
core-api/ is a good fit. Rename it to symbol-namespaces.rst
for disambiguation, and also add it to index.rst and MAINTAINERS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Remove iw_cxgb3 module from kernel as the corresponding HW Chelsio T3 has
reached EOL.
Link: https://lore.kernel.org/r/20190930074252.20133-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.
Support for the kernel driver was removed from the upstream utilities
in 2008:
https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db
Cc: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update maintainer entry for qla2xxx driver now that email addresses have
been changed to Marvell.
Link: https://lore.kernel.org/r/20191001153338.28765-1-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull kgdb update from Daniel Thompson:
"This is just a single patch adding a new reviewer for kgdb. New
reviewers will be a big help so I decided to consider this to be a
fix!
I'm looking forward to working more closely with Doug"
* tag 'kgdb-5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
|
|
I'm interested in kdb / kgdb and have sent various fixes over the
years. I'd like to get CCed on patches so I can be aware of them and
also help review.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Add a formal git tree and missing files for erofs
after moving out of staging for everyone to blame
in order for better improvement.
Acked-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190919062838.106423-1-gaoxiang25@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
|
|
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
|
|
Pull fuse virtio-fs support from Miklos Szeredi:
"Virtio-fs allows exporting directory trees on the host and mounting
them in guest(s).
This isn't actually a new filesystem, but a glue layer between the
fuse filesystem and a virtio based back-end.
It's similar in functionality to the existing virtio-9p solution, but
significantly faster in benchmarks and has better POSIX compliance.
Further permformance improvements can be achieved by sharing the page
cache between host and guest, allowing for faster I/O and reduced
memory use.
Kata Containers have been including the out-of-tree virtio-fs (with
the shared page cache patches as well) since version 1.7 as an
experimental feature. They have been active in development and plan to
switch from virtio-9p to virtio-fs as their default solution. There
has been interest from other sources as well.
The userspace infrastructure is slated to be merged into qemu once the
kernel part hits mainline.
This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi"
* tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtio-fs: add virtiofs filesystem
virtio-fs: add Documentation/filesystems/virtiofs.rst
fuse: reserve values for mapping protocol
|
|
Pull pwm updates from Thierry Reding:
"Besides one new driver being added for the PWM controller found in
various Spreadtrum SoCs, this series of changes brings a slew of,
mostly minor, fixes and cleanups for existing drivers, as well as some
enhancements to the core code.
Lastly, Uwe is added to the PWM subsystem entry of the MAINTAINERS
file, making official his role as a reviewer"
* tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (34 commits)
MAINTAINERS: Add myself as reviewer for the PWM subsystem
MAINTAINERS: Add patchwork link for PWM entry
MAINTAINERS: Add a selection of PWM related keywords to the PWM entry
pwm: mediatek: Add MT7629 compatible string
dt-bindings: pwm: Update bindings for MT7629 SoC
pwm: mediatek: Update license and switch to SPDX tag
pwm: mediatek: Use pwm_mediatek as common prefix
pwm: mediatek: Allocate the clks array dynamically
pwm: mediatek: Remove the has_clks field
pwm: mediatek: Drop the check for of_device_get_match_data()
pwm: atmel: Consolidate driver data initialization
pwm: atmel: Remove unneeded check for match data
pwm: atmel: Remove platform_device_id and use only dt bindings
pwm: stm32-lp: Add check in case requested period cannot be achieved
pwm: Ensure pwm_apply_state() doesn't modify the state argument
pwm: fsl-ftm: Don't update the state for the caller of pwm_apply_state()
pwm: sun4i: Don't update the state for the caller of pwm_apply_state()
pwm: rockchip: Don't update the state for the caller of pwm_apply_state()
pwm: Let pwm_get_state() return the last implemented state
pwm: Introduce local struct pwm_chip in pwm_apply_state()
...
|
|
Pull thermal management updates from Zhang Rui:
- Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria)
- Fix a use after free bug when unregistering thermal zone devices (Ido
Schimmel)
- Fix thermal core framework to use put_device() when device_register()
fails (Yue Hu)
- Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake
platform (Srinivas Pandruvada)
- Add clock operations in qorip thermal driver, for some platforms with
clock control like i.MX8MQ (Anson Huang)
- A couple of trivial fixes and cleanups for thermal core and different
soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan,
Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta,
Srinivas Kandagatla)
* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
MAINTAINERS: Add Amit Kucheria as reviewer for thermal
thermal: Add some error messages
thermal: Fix use-after-free when unregistering thermal zone device
thermal/drivers/core: Use put_device() if device_register() fails
thermal_hwmon: Sanitize thermal_zone type
thermal: intel: Use dev_get_drvdata
thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...)
thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses
thermal: int340x: processor_thermal: Add Ice Lake support
drivers: thermal: qcom: tsens: Fix memory leak from qfprom read
thermal: tegra: Fix a typo
thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
thermal: armada: Fix -Wshift-negative-value
dt-bindings: thermal: qoriq: Add optional clocks property
thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap()
thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail
thermal: qoriq: Add clock operations
drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset
|
|
To address a major procedural concern on Linus's part the keyrings needs
a co-maintainer.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I spend some time in the nearer past reviewing PWM patches. Honor this
by adding me as a reviewer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This instance collects patches and Thierry updates the patches' status
there, so I consider it used and suitable to document it officially.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This is just a small subset of the relevant functions, but should at
least catch all new code as every consumer has to call pwm_apply_state()
(or the legacy function pwm_config()) and every PWM provider has to
implement pwm_ops.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Yanjun has been spending quite a lot of time fixing bugs
in FORCEDETH source code. I'd like to add Yanjun to maintainers
list.
Signed-off-by: Rain River <rain.1986.08.12@gmail.com>
Acked-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull tpm fixes from Jarkko Sakkinen.
* tag 'tpmdd-next-20190925' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Wrap the buffer from the caller to tpm_buf in tpm_send()
MAINTAINERS: keys: Update path to trusted.h
KEYS: trusted: correctly initialize digests and fix locking issue
selftests/tpm2: Add log and *.pyc to .gitignore
selftests/tpm2: Add the missing TEST_FILES assignment
|
|
Pull i2c updates from Wolfram Sang:
- new driver for ICY, an Amiga Zorro card :)
- axxia driver gained slave mode support, NXP driver gained ACPI
- the slave EEPROM backend gained 16 bit address support
- and lots of regular driver updates and reworks
* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: tegra: Move suspend handling to NOIRQ phase
i2c: imx: ACPI support for NXP i2c controller
i2c: uniphier(-f): remove all dev_dbg()
i2c: uniphier(-f): use devm_platform_ioremap_resource()
i2c: slave-eeprom: Add comment about address handling
i2c: exynos5: Remove IRQF_ONESHOT
i2c: stm32f7: Make structure stm32f7_i2c_algo constant
i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
i2c-eeprom_slave: Add support for more eeprom models
i2c: fsi: Add of_put_node() before break
i2c: synquacer: Make synquacer_i2c_ops constant
i2c: hix5hd2: Remove IRQF_ONESHOT
i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
watchdog: iTCO: Add support for Cannon Lake PCH iTCO
i2c: iproc: Make bcm_iproc_i2c_quirks constant
i2c: iproc: Add full name of devicetree node to adapter name
i2c: piix4: Add ACPI support
i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
i2c: ocores: use request_any_context_irq() to register IRQ handler
i2c: designware: Fix optional reset error handling
...
|
|
Update MAINTAINERS record to reflect that trusted.h
was moved to a different directory in commit 22447981fc05
("KEYS: Move trusted.h to include/keys [ver #2]").
Cc: Denis Kenzior <denkenz@gmail.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Merrifield Basin Cove PMIC
New Device Support:
- Add support for Intel Tiger Lake to Intel LPSS PCI
- Add support for Intel Sky Lake to Intel LPSS PCI
- Add support for ST-Ericsson DB8520 to DB8500 PRCMU
New Functionality:
- Add RTC and PWRC support to MT6323
Fix-ups:
- Clean-up include files; davinci_voicecodec, asic3, sm501, mt6397
- Ignore return values from debugfs_create*(); ab3100-*, ab8500-debugfs, aat2870-core
- Device Tree changes; rn5t618, mt6397
- Use new I2C API; tps80031, 88pm860x-core, ab3100-core, bcm590xx,
da9150-core, max14577, max77693, max77843, max8907,
max8925-i2c, max8997, max8998, palmas, twl-core,
- Remove obsolete code; da9063, jz4740-adc
- Simplify semantics; timberdale, htc-i2cpld
- Add 'fall-through' tags; omap-usb-host, db8500-prcmu
- Remove superfluous prints; ab8500-debugfs, db8500-prcmu, fsl-imx25-tsadc,
intel_soc_pmic_bxtwc, qcom_rpm, sm501
- Trivial rename/whitespace/typo fixes; mt6397-core, MAINTAINERS
- Reorganise code structure; mt6397-*
- Improve code consistency; intel-lpss
- Use MODULE_SOFTDEP() helper; intel-lpss
- Use DEFINE_RES_*() helpers; mt6397-core
Bug Fixes:
- Clean-up resources; max77620
- Prevent input events being dropped on resume; intel-lpss-pci
- Prevent sleeping in IRQ context; ezx-pcap"
* tag 'mfd-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits)
mfd: mt6323: Add MT6323 RTC and PWRC
mfd: mt6323: Replace boilerplate resource code with DEFINE_RES_* macros
mfd: mt6397: Add mutex include
dt-bindings: mfd: mediatek: Add MT6323 Power Controller
dt-bindings: mfd: mediatek: Update RTC to include MT6323
dt-bindings: mfd: mediatek: mt6397: Change to relative paths
mfd: db8500-prcmu: Support the higher DB8520 ARMSS
mfd: intel-lpss: Use MODULE_SOFTDEP() instead of implicit request
mfd: htc-i2cpld: Drop check because i2c_unregister_device() is NULL safe
mfd: sm501: Include the GPIO driver header
mfd: intel-lpss: Add Intel Skylake ACPI IDs
mfd: intel-lpss: Consistently use GENMASK()
mfd: Add support for Merrifield Basin Cove PMIC
mfd: ezx-pcap: Replace mutex_lock with spin_lock
mfd: asic3: Include the right header
MAINTAINERS: altera-sysmgr: Fix typo in a filepath
mfd: mt6397: Extract IRQ related code from core driver
mfd: mt6397: Rename macros to something more readable
mfd: Remove dev_err() usage after platform_get_irq()
mfd: db8500-prcmu: Mark expected switch fall-throughs
...
|
|
Pull backlight updates from Lee Jones:
"Core Frameworks
- Obtain scale type through sysfs
New Functionality:
- Provide Device Tree functionality in rave-sp-backlight
- Calculate if scale type is (non-)linear in pwm_bl
Fix-ups:
- Simplify code in lm3630a_bl
- Trivial rename/whitespace/typo fixes in lms283gf05
- Remove superfluous NULL check in tosa_lcd
- Fix power state initialisation in gpio_backlight
- List supported file in MAINTAINERS
Bug Fixes:
- Kconfig - default to not building unless requested in
{LED,BACKLIGHT}_CLASS_DEVICE"
* tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Set scale type for brightness curves specified in the DT
backlight: pwm_bl: Set scale type for CIE 1931 curves
backlight: Expose brightness curve type through sysfs
MAINTAINERS: Add entry for stable backlight sysfs ABI documentation
backlight: gpio-backlight: Correct initial power state handling
video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe
video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}
backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()'
backlight: lm3630a: Switch to use fwnode_property_count_uXX()
backlight: rave-sp: Leave initial state and register with correct device
|
|
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
(Krzysztof Wilczynski)
- Fix incorrect PCIe device types and remove dev->has_secondary_link
to simplify code that deals with upstream/downstream ports (Mika
Westerberg)
- After suspend, restore Resizable BAR size bits correctly for 1MB
BARs (Sumit Saxena)
- Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)
Virtualization:
- Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
Labs (Ali Saidi)
- Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)
- Remove group write permissions from sysfs sriov_numvfs,
sriov_drivers_autoprobe (Kelsey Skunberg)
Hotplug:
- Simplify pciehp indicator control (Denis Efremov)
Peer-to-peer DMA:
- Allow P2P DMA between root ports for whitelisted bridges (Logan
Gunthorpe)
- Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)
- DMA map P2P DMA requests that traverse host bridge (Logan
Gunthorpe)
Amazon Annapurna Labs host bridge driver:
- Add DT binding and controller driver (Jonathan Chocron)
Hyper-V host bridge driver:
- Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)
- Fix PCI domain number collisions (Haiyang Zhang)
- Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)
- Fix build errors on non-SYSFS config (Randy Dunlap)
i.MX6 host bridge driver:
- Limit DBI register length (Stefan Agner)
Intel VMD host bridge driver:
- Fix config addressing issues (Jon Derrick)
Layerscape host bridge driver:
- Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)
- Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
(Xiaowei Bao)
Mediatek host bridge driver:
- Add MT7629 controller support (Jianjun Wang)
Mobiveil host bridge driver:
- Fix CPU base address setup (Hou Zhiqiang)
- Make "num-lanes" property optional (Hou Zhiqiang)
Tegra host bridge driver:
- Fix OF node reference leak (Nishka Dasgupta)
- Disable MSI for root ports to work around design problem (Vidya
Sagar)
- Add Tegra194 DT binding and controller support (Vidya Sagar)
- Add support for sideband pins and slot regulators (Vidya Sagar)
- Add PIPE2UPHY support (Vidya Sagar)
Misc:
- Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)
- Unexport pci_bus_get(), etc (Kelsey Skunberg)
- Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
the PCI core (Kelsey Skunberg)
- Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)
- Mark expected switch fall-through (Gustavo A. R. Silva)
- Propagate errors for optional regulators and PHYs (Thierry Reding)
- Fix kernel command line resource_alignment parameter issues (Logan
Gunthorpe)"
* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
arm64: tegra: Add configuration for PCIe C5 sideband signals
PCI: tegra: Add support to enable slot regulators
PCI: tegra: Add support to configure sideband pins
PCI: vmd: Fix shadow offsets to reflect spec changes
PCI: vmd: Fix config addressing when using bus offsets
PCI: dwc: Add validation that PCIe core is set to correct mode
PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
PCI: Add ACS quirk for Amazon Annapurna Labs root ports
PCI: Add Amazon's Annapurna Labs vendor ID
MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
dt-bindings: PCI: tegra: Add sideband pins configuration entries
PCI: tegra: Add Tegra194 PCIe support
PCI: Get rid of dev->has_secondary_link flag
...
|
|
Add Amit Kucheria as the reviewer for thermal as he would like to
participate in the review process effort for the thermal framework.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
- Propagate regulator_get_optional() errors so callers can distinguish
real errors from optional regulators that are absent (Thierry Reding)
- Propagate devm_of_phy_get() errors so callers can distinguish
real errors from optional PHYs that are absent (Thierry Reding)
- Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi)
* remotes/lorenzo/pci/misc:
MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
PCI: iproc: Propagate errors for optional PHYs
PCI: histb: Propagate errors for optional regulators
PCI: armada8x: Propagate errors for optional PHYs
PCI: imx6: Propagate errors for optional regulators
PCI: exynos: Propagate errors for optional PHYs
PCI: rockchip: Propagate errors for optional regulators
|
|
Pull HID updates from Jiri Kosina:
- syzbot memory corruption fixes for hidraw, Prodikeys, Logitech and
Sony drivers from Alan Stern and Roderick Colenbrander
- stuck 'fn' key fix for hid-apple from Joao Moreno
- proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian
Henneke
- fixes for handling power management for intel-ish devices with NO_D3
flag set, from Zhang Lixu
- extension of supported usage range for customer page, as some
Logitech devices are actually making use of it. From Olivier Gay.
- hid-multitouch is no longer filtering mice node creation, from
Benjamin Tissoires
- MobileStudio Pro 13 support, from Ping Cheng
- a few other device ID additions and assorted smaller fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: core: fix dmesg flooding if report field larger than 32bit
HID: core: Add printk_once variants to hid_warn() etc
HID: core: reformat and reduce hid_printk macros
HID: prodikeys: Fix general protection fault during probe
HID: wacom: add new MobileStudio Pro 13 support
HID: sony: Fix memory corruption issue on cleanup.
HID: i2c-hid: modify quirks for weida's devices
HID: apple: Fix stuck function keys when using FN
HID: sb0540: add support for Creative SB0540 IR receivers
HID: Add quirk for HP X500 PIXART OEM mouse
HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices fails
hid-logitech-dj: add the new Lightspeed receiver
HID: logitech-dj: add support of the G700(s) receiver
HID: multitouch: add support for the Smart Tech panel
HID: multitouch: do not filter mice nodes
HID: do not call hid_set_drvdata(hdev, NULL) in drivers
HID: wacom: do not call hid_set_drvdata(hdev, NULL)
HID: logitech: Fix general protection fault caused by Logitech driver
HID: hidraw: Fix invalid read in hidraw_ioctl
HID: wacom: support named keys on older devices
...
|
|
Pull power supply and reset updates from Sebastian Reichel:
"Core:
- Ensure HWMON devices are registered with valid names
- Fix device wakeup code
Drivers:
- bq25890_charger: Add BQ25895 support
- axp288_fuel_gauge: Add Minix Neo Z83-4 to blacklist
- sc27xx: improve battery calibration
- misc small fixes all over drivers"
* tag 'for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (24 commits)
power: supply: cpcap-charger: Enable vbus boost voltage
power: supply: sc27xx: Add POWER_SUPPLY_PROP_CALIBRATE attribute
power: supply: sc27xx: Optimize the battery capacity calibration
power: supply: sc27xx: Make sure the alarm capacity is larger than 0
power: supply: sc27xx: Fix the the accuracy issue of coulomb calculation
power: supply: sc27xx: Fix conditon to enable the FGU interrupt
power: supply: sc27xx: Add POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN attribute
power: supply: max77650: add MODULE_ALIAS()
power: supply: isp1704: remove redundant assignment to variable ret
power: supply: bq25890_charger: Add the BQ25895 part
power: supply: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
power: supply: sc27xx: Introduce local variable 'struct device *dev'
power: reset: reboot-mode: Fix author email format
power: supply: ab8500: remove set but not used variables 'vbup33_vrtcn' and 'bup_vch_range'
power: supply: max17042_battery: Fix a typo in function names
power: reset: gpio-restart: Fix typo when gpio reset is not found
power: supply: Init device wakeup after device_add()
power: supply: ab8500_charger: Mark expected switch fall-through
power: supply: sbs-battery: only return health when battery present
MAINTAINERS: N900: Remove isp1704_charger.h record
...
|
|
Pull RTC updates from Alexandre Belloni:
"Two new drivers and the new pcf2127 feature make the bulk of the
additions. The rest are the usual fixes and new features.
Subsystem:
- add debug message when registration fails
New drivers:
- Amlogic Virtual Wake
- Freescale FlexTimer Module alarm
Drivers:
- remove superfluous error messages
- convert to i2c_new_dummy_device and devm_i2c_new_dummy_device
- Remove dev_err() usage after platform_get_irq()
- Set RTC range for: pcf2123, pcf8563, snvs.
- pcf2127: tamper detection and watchdog support
- pcf85363: fix regmap issue
- sun6i: H6 support
- remove w90x900/nuc900 driver"
* tag 'rtc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits)
rtc: meson: mark PM functions as __maybe_unused
rtc: sc27xx: Remove clearing SPRD_RTC_POWEROFF_ALM_FLAG flag
dt-bindings: rtc: ds1307: add rx8130 compatible
rtc: sun6i: Allow using as wakeup source from suspend
rtc: pcf8563: let the core handle range offsetting
rtc: pcf8563: remove useless indirection
rtc: pcf8563: convert to devm_rtc_allocate_device
rtc: pcf8563: add Microcrystal RV8564 compatible
rtc: pcf8563: add Epson RTC8564 compatible
rtc: s35390a: convert to devm_i2c_new_dummy_device()
rtc: max77686: convert to devm_i2c_new_dummy_device()
rtc: pcf85363/pcf85263: fix regmap error in set_time
rtc: snvs: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: snvs: set range
rtc: snvs: fix possible race condition
rtc: pcf2127: bugfix: watchdog build dependency
rtc: pcf2127: add tamper detection support
rtc: pcf2127: add watchdog feature support
rtc: pcf2127: bugfix: read rtc disables watchdog
rtc: pcf2127: cleanup register and bit defines
...
|
|
Pull rpmsg updates from Bjorn Andersson:
"This contains updates to make the rpmsg sample driver more useful,
fixes the naming of GLINK devices to avoid naming collisions and a few
minor bug fixes. It also updates MAINTAINERS to reflect the move to
kernel.org"
* tag 'rpmsg-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: glink-smem: Name the edge based on parent remoteproc
rpmsg: glink: Use struct_size() helper
rpmsg: virtio_rpmsg_bus: replace "%p" with "%pK"
MAINTAINERS: rpmsg: fix git tree location
rpmsg: core: fix comments
samples/rpmsg: Introduce a module parameter for message count
samples/rpmsg: Replace print_hex_dump() with print_hex_dump_debug()
|
|
Pull remoteproc updates from Bjorn Andersson:
"This exposes the remoteproc's name in sysfs, allows stm32 to enter
platform standby and provides bug fixes for stm32 and Qualcomm's modem
remoteproc drivers. Finally it updates MAINTAINERS to reflect the move
to kernel.org"
* tag 'rproc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
MAINTAINERS: remoteproc: update git tree location
remoteproc: Remove dev_err() usage after platform_get_irq()
remoteproc: stm32: manage the get_irq probe defer case
remoteproc: stm32: clear MCU PDDS at firmware start
remoteproc: qcom: q6v5-mss: fixup q6v5_pds_enable error handling
remoteproc: Add a sysfs interface for name
remoteproc: qcom: Move glink_ssr notification after stop
|
|
Pull modules updates from Jessica Yu:
"The main bulk of this pull request introduces a new exported symbol
namespaces feature. The number of exported symbols is increasingly
growing with each release (we're at about 31k exports as of 5.3-rc7)
and we currently have no way of visualizing how these symbols are
"clustered" or making sense of this huge export surface.
Namespacing exported symbols allows kernel developers to more
explicitly partition and categorize exported symbols, as well as more
easily limiting the availability of namespaced symbols to other parts
of the kernel. For starters, we have introduced the USB_STORAGE
namespace to demonstrate the API's usage. I have briefly summarized
the feature and its main motivations in the tag below.
Summary:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing
kernel developers to better manage the export surface, allow
subsystem maintainers to explicitly state that usage of some
exported symbols should only be limited to certain users (think:
inter-module or inter-driver symbols, debugging symbols, etc), as
well as more easily limiting the availability of namespaced symbols
to other parts of the kernel.
With the module import requirement, it is also easier to spot the
misuse of exported symbols during patch review.
Two new macros are introduced: EXPORT_SYMBOL_NS() and
EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there"
* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove leftover '#undef' from export header
module: remove unneeded casts in cmp_name()
module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
module: remove redundant 'depends on MODULES'
module: Fix link failure due to invalid relocation on namespace offset
usb-storage: export symbols in USB_STORAGE namespace
usb-storage: remove single-use define for debugging
docs: Add documentation for Symbol Namespaces
scripts: Coccinelle script for namespace dependencies.
modpost: add support for generating namespace dependencies
export: allow definition default namespaces in Makefiles or sources
module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
modpost: add support for symbol namespaces
module: add support for symbol namespaces.
export: explicitly align struct kernel_symbol
module: support reading multiple values per modinfo tag
|
Jason Gunthorpe
Linus Torvalds
Olof Johansson
Baolin Wang
Florian Fainelli
Paul Burton
Sean Wang
David Ahern
Stefan Wahren
Geert Uytterhoeven
Pavel Machek
Masahiro Yamada
Potnuri Bharat Teja
Helge Deller
Bastien Nocera
Himanshu Madhani
Douglas Anderson
Gao Xiang
Jarkko Sakkinen
Uwe Kleine-König
Rain River
Denis Efremov
Amit Kucheria
Bjorn Helgaas