aboutsummaryrefslogtreecommitdiffstats
path: root/README (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc9-2/+24
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: convert the mode field of ip_tunnel_info to flagsJiri Benc7-13/+7
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29net: FIB tracepointsDavid Ahern4-0/+120
A few useful tracepoints developing VRF driver. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28openvswitch: Fix conntrack compilation without mark.Joe Stringer1-3/+14
Fix build with !CONFIG_NF_CONNTRACK_MARK && CONFIG_OPENVSWITCH_CONNTRACK Fixes: 182e304 ("openvswitch: Allow matching on conntrack mark") Reported-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Tested-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28bpf: add support for %s specifier to bpf_trace_printk()Alexei Starovoitov1-2/+30
%s specifier makes bpf program and kernel debugging easier. To make sure that trace_printk won't crash the unsafe string is copied into stack and unsafe pointer is substituted. The following C program: #include <linux/fs.h> int foo(struct pt_regs *ctx, struct filename *filename) { void *name = 0; bpf_probe_read(&name, sizeof(name), &filename->name); bpf_trace_printk("executed %s\n", name); return 0; } when attached to kprobe do_execve() will produce output in /sys/kernel/debug/tracing/trace_pipe : make-13492 [002] d..1 3250.997277: : executed /bin/sh sh-13493 [004] d..1 3250.998716: : executed /usr/bin/gcc gcc-13494 [002] d..1 3250.999822: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/cc1 gcc-13495 [002] d..1 3251.006731: : executed /usr/bin/as gcc-13496 [002] d..1 3251.011831: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/collect2 collect2-13497 [000] d..1 3251.012941: : executed /usr/bin/ld Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28lib: introduce strncpy_from_unsafe()Alexei Starovoitov3-16/+47
generalize FETCH_FUNC_NAME(memory, string) into strncpy_from_unsafe() and fix sparse warnings that were present in original implementation. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28netpoll: warn on netpoll_send_udp users who haven't disabled irqsNikolay Aleksandrov1-0/+2
Make sure we catch future netpoll_send_udp users who use it without disabling irqs and also as a hint for poll_controller users. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28phylib: simplify NULL checksSergei Shtylyov2-5/+5
Fix scripts/checkpatch.pl's messages like: CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect" BTW, it doesn't detect the reversed comparisons (which I've fixed as well). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28phylib: simplify bogus phy_device_create() resultSergei Shtylyov1-1/+1
Get rid of the bogus string of type casts where ERR_PTR() is enough. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: sched: don't break line in tc_classify loop notificationDaniel Borkmann1-5/+4
Just some minor noise follow-up to address some stylistic issues of commit 3b3ae880266d ("net: sched: consolidate tc_classify{,_compat}"). Accidentally v1 instead of v2 of that commit got applied, so this patch adds the relative diff. Suggested-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28sfc: Allow driver to cope with a lower number of VIs than it needs for RSSShradha Shah6-28/+72
Previously, the driver would refuse to load if it couldn't secure enough VIs from the MC to fulfill its RSS requirements. This was causing probe to fail on later functions in configurations where we'd run out of VIs, such as having many VFs. This change allows the driver to load with fewer VIs, down to a minimum of 2. A warning will be printed saying that RSS requirements were not met, possibly affecting performance. efx->max_tx_channels needs to be set to avoid going down the failure path in efx_probe_nic() immediately in the loop after the probe() NIC-type function. Also, Set rc=ENOSPC when bombing out of efx_probe_nic due to lack of VIs. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28cxgb4: Force uninitialized state if FW in adapter is unsupportedHariprasad Shenai4-0/+72
Forcing uninitialized state allows us to upgrade and reinitialize the adapter. FW_VERSION_T4 = 1.4.0.0 FW_VERSION_T5 = 0.0.0.0 FW_VERSION_T6 = 0.0.0.0 At this point driver supports above and greater than above version. If FW in adapter < min FW_VERSION driver supports tries to upgrade the FW If FW in adapter >= FW_VERSION driver supports then it follows normal path Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28openswitch: fix typo CONFIG_NF_CONNTRACK_LABELValentin Rothberg1-1/+1
Fix typo in conntrack.c s/CONFIG_NF_CONNTRACK_LABEL/CONFIG_NF_CONNTRACK_LABELS/ Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add support for VRFs to inetpeer cacheDavid Ahern4-9/+21
inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Refactor inetpeer address structDavid Ahern1-16/+19
Move the inetpeer_addr_base union to inetpeer_addr and drop inetpeer_addr_base. Both the a6 and in6_addr overlays are not needed; drop the __be32 version and rename in6 to a6 for consistency with ipv4. Add a new u32 array to the union which removes the need for the typecast in the compare function and the use of a consistent arg for both ipv4 and ipv6 addresses which makes the compare function more readable. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add helper function to compare inetpeer addressesDavid Ahern3-23/+19
tcp_metrics and inetpeer both have functions to compare inetpeer addresses. Consolidate into 1 version. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add set,get helpers for inetpeer addressesDavid Ahern2-38/+50
Use inetpeer set,get helpers in tcp_metrics rather than peeking into the inetpeer_addr struct. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Introduce ipv4_addr_hash and use it for tcp metricsDavid Ahern2-6/+11
Refactors a common line into helper function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add ethernet header for pass through VRF deviceDavid Ahern1-3/+45
The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net/xen-netfront: only napi_synchronize() if runningChas Williams1-1/+2
If an interface isn't running napi_synchronize() will hang forever. [ 392.248403] rmmod R running task 0 359 343 0x00000000 [ 392.257671] ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88 [ 392.267644] ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40 [ 392.277524] 0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40 [ 392.287323] Call Trace: [ 392.291599] [<ffffffff81796927>] schedule+0x37/0x90 [ 392.298553] [<ffffffff8179985b>] schedule_timeout+0x14b/0x280 [ 392.306421] [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80 [ 392.314006] [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0 [ 392.322125] [<ffffffff81109d07>] msleep+0x37/0x50 [ 392.329037] [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront] [ 392.339658] [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront] [ 392.348516] [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0 [ 392.356257] [<ffffffff814e7217>] __device_release_driver+0x87/0x120 [ 392.364645] [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0 [ 392.371989] [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0 [ 392.379883] [<ffffffff814e84f0>] driver_unregister+0x30/0x70 [ 392.387495] [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20 [ 392.395908] [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront] [ 392.404877] [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230 [ 392.412804] [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71 Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28IGMP: Inhibit reports for local multicast groupsPhilip Downey3-1/+33
The range of addresses between 224.0.0.0 and 224.0.0.255 inclusive, is reserved for the use of routing protocols and other low-level topology discovery or maintenance protocols, such as gateway discovery and group membership reporting. Multicast routers should not forward any multicast datagram with destination addresses in this range, regardless of its TTL. Currently, IGMP reports are generated for this reserved range of addresses even though a router will ignore this information since it has no purpose. However, the presence of reserved group addresses in an IGMP membership report uses up network bandwidth and can also obscure addresses of interest when inspecting membership reports using packet inspection or debug messages. Although the RFCs for the various version of IGMP (e.g.RFC 3376 for v3) do not specify that the reserved addresses be excluded from membership reports, it should do no harm in doing so. In particular there should be no adverse effect in any IGMP snooping functionality since 224.0.0.x is specifically excluded as per RFC 4541 (IGMP and MLD Snooping Switches Considerations) section 2.1.2. Data Forwarding Rules: 2) Packets with a destination IP (DIP) address in the 224.0.0.X range which are not IGMP must be forwarded on all ports. IGMP reports for local multicast groups can now be optionally inhibited by means of a system control variable (by setting the value to zero) e.g.: echo 0 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports To retain backwards compatibility the previous behaviour is retained by default on system boot or reverted by setting the value back to non-zero e.g.: echo 1 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports Signed-off-by: Philip Downey <pdowney@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28r8169: Add software counter for multicast packagesCorinna Vinschen1-5/+4
The multicast hardware counter on 8168/8111 chips is only 32 bit while the statistics in struct rtnl_link_stats64 are 64 bit. Given that statistics are requested on an irregular basis, an overflow of the hardware counter can go unnoticed. To count even very large numbers of multicast packets reliably, add a software counter and remove previously applied code to fill the multicast field requested by @rtl8169_get_stats64 with the values read from the rx_multicast hardware counter. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28netfilter: reduce sparse warningsFlorian Westphal4-8/+5
bridge/netfilter/ebtables.c:290:26: warning: incorrect type in assignment (different modifiers) -> remove __pure annotation. ipv6/netfilter/ip6t_SYNPROXY.c:240:27: warning: cast from restricted __be16 -> switch ntohs to htons and vice versa. netfilter/core.c:391:30: warning: symbol 'nfq_ct_nat_hook' was not declared. Should it be static? -> delete it, got removed net/netfilter/nf_synproxy_core.c:221:48: warning: cast to restricted __be32 -> Use __be32 instead of u32. Tested with objdiff that these changes do not affect generated code. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-28Revert "netfilter: xtables: compute exact size needed for jumpstack"Florian Westphal3-45/+25
This reverts commit 98d1bd802cdbc8f56868fae51edec13e86b59515. mark_source_chains will not re-visit chains, so *filter :INPUT ACCEPT [365:25776] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [217:45832] :t1 - [0:0] :t2 - [0:0] :t3 - [0:0] :t4 - [0:0] -A t1 -i lo -j t2 -A t2 -i lo -j t3 -A t3 -i lo -j t4 # -A INPUT -j t4 # -A INPUT -j t3 # -A INPUT -j t2 -A INPUT -j t1 COMMIT Will compute a chain depth of 2 if the comments are removed. Revert back to counting the number of chains for the time being. Reported-by: Cong Wang <cwang@twopensource.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-27net: sched: simplify attach_one_default_qdisc()Phil Sutter1-29/+12
Now that noqueue qdisc can be attached just like any other qdisc, no special treatment is necessary anymore when attaching it as default qdisc. This change has the added benefit that 'tc qdisc show' prints noqueue instead of nothing for devices defaulting to noqueue. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: register noqueue qdiscPhil Sutter3-1/+13
This way users can attach noqueue just like any other qdisc using tc without having to mess with tx_queue_len first. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: ignore tx_queue_len when assigning default qdiscPhil Sutter1-2/+1
Since alloc_netdev_mqs() sets IFF_NO_QUEUE for drivers not initializing tx_queue_len, it is safe to assume that if tx_queue_len is zero, dev->priv flags always contains IFF_NO_QUEUE. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: fix IFF_NO_QUEUE for drivers using alloc_netdevPhil Sutter1-1/+1
Printing a warning in alloc_netdev_mqs() if tx_queue_len is zero and IFF_NO_QUEUE not set is not appropriate since drivers may use one of the alloc_netdev* macros instead of alloc_etherdev*, thereby not intentionally leaving tx_queue_len uninitialized. Instead check here if tx_queue_len is zero and set IFF_NO_QUEUE, so the value of tx_queue_len can be ignored in net/sched_generic.c. Fixes: 906470c ("net: warn if drivers set tx_queue_len = 0") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27sock: fix kernel doc errorJean Sacren1-1/+1
The symbol '__sk_reclaim' is not present in the current tree. Apparently '__sk_reclaim' was meant to be '__sk_mem_reclaim', so fix it with the right symbol name for the kernel doc. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE statelucien1-1/+1
Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown") fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not resetting the association overall_error_count. This allowed the association to better enforce assoc.max_retrans limit. However, the same issue still exists when the association is in SHUTDOWN_RECEIVED state. In this state, HB-ACKs will continue to reset the overall_error_count for the association would extend the lifetime of association unnecessarily. This patch solves this by resetting the overall_error_count whenever the current state is small then SCTP_STATE_SHUTDOWN_PENDING. As a small side-effect, we end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT states, but they are not really impacted because we disable Heartbeats in those states. Fixes: Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net/mlx4_core: Fix unintialized variable used in error pathCarol L Soto1-3/+2
The uninitialized value name in mlx4_en_activate_cq was used in order to print an error message. Fixing it by replacing it with cq->vector. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net/mlx4_core: Capping number of requested MSIXs to MAX_MSIXCarol L Soto1-1/+9
We currently manage IRQs in pool_bm which is a bit field of MAX_MSIX bits. Thus, allocating more than MAX_MSIX interrupts can't be managed in pool_bm. Fixing this by capping number of requested MSIXs to MAX_MSIX. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27bridge: fdb: rearrange net_bridge_fdb_entryNikolay Aleksandrov1-2/+2
While looking into fixing the local entries scalability issue I noticed that the structure is badly arranged because vlan_id would fall in a second cache line while keeping rcu which is used only when deleting in the first, so re-arrange the structure and push rcu to the end so we can get 16 bytes which can be used for other fields (by pushing rcu fully in the second 64 byte chunk). With this change all the core necessary information when doing fdb lookups will be available in a single cache line. pahole before (note vlan_id): struct net_bridge_fdb_entry { struct hlist_node hlist; /* 0 16 */ struct net_bridge_port * dst; /* 16 8 */ struct callback_head rcu; /* 24 16 */ long unsigned int updated; /* 40 8 */ long unsigned int used; /* 48 8 */ mac_addr addr; /* 56 6 */ unsigned char is_local:1; /* 62: 7 1 */ unsigned char is_static:1; /* 62: 6 1 */ unsigned char added_by_user:1; /* 62: 5 1 */ unsigned char added_by_external_learn:1; /* 62: 4 1 */ /* XXX 4 bits hole, try to pack */ /* XXX 1 byte hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ __u16 vlan_id; /* 64 2 */ /* size: 72, cachelines: 2, members: 11 */ /* sum members: 65, holes: 1, sum holes: 1 */ /* bit holes: 1, sum bit holes: 4 bits */ /* padding: 6 */ /* last cacheline: 8 bytes */ } pahole after (note vlan_id): struct net_bridge_fdb_entry { struct hlist_node hlist; /* 0 16 */ struct net_bridge_port * dst; /* 16 8 */ long unsigned int updated; /* 24 8 */ long unsigned int used; /* 32 8 */ mac_addr addr; /* 40 6 */ __u16 vlan_id; /* 46 2 */ unsigned char is_local:1; /* 48: 7 1 */ unsigned char is_static:1; /* 48: 6 1 */ unsigned char added_by_user:1; /* 48: 5 1 */ unsigned char added_by_external_learn:1; /* 48: 4 1 */ /* XXX 4 bits hole, try to pack */ /* XXX 7 bytes hole, try to pack */ struct callback_head rcu; /* 56 16 */ /* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */ /* size: 72, cachelines: 2, members: 11 */ /* sum members: 65, holes: 1, sum holes: 7 */ /* bit holes: 1, sum bit holes: 4 bits */ /* last cacheline: 8 bytes */ } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Include ip6_fib.h.Joe Stringer1-0/+1
kbuild test robot reports that certain configurations will not automatically pick up on the "struct rt6_info" definition, so explicitly include the header for this structure. Fixes: 7f8a436 "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27netfilter: Define v6ops in !CONFIG_NETFILTER case.Joe Stringer1-9/+9
When CONFIG_OPENVSWITCH is set, and CONFIG_NETFILTER is not set, the openvswitch IPv6 fragmentation handling cannot refer to ipv6_ops because it isn't defined. Add a dummy version to avoid #ifdefs in source files. Fixes: 7f8a436 "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27mlxsw: Make mailboxes 4KB alignedIdo Schimmel1-33/+50
The HW-SW contract requires mailboxes passed to the firmware to be 4KB aligned. Previously, these mailboxes were mapped using streaming DMA routines, which do not guarantee the bus addresses to be 4KB aligned. Under certain conditions this constraint was indeed violated and errors were observed. By using consistent DMA mapping routines together with a mailbox size of 4KB we are guaranteed not to violate the constraint. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27mlxsw: adjust transmit fail log message level in __mlxsw_emad_transmitJiri Pirko1-2/+2
When transmit fails, it is an error, not a warning. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27mlxsw: Remove duplicate included headerIdo Schimmel1-1/+0
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27rocker: use change upper infoJiri Pirko1-23/+38
Since now information about changed upper is passed along, benefit from that and use this info directly. This also fixes possible issues that could happen when non-master device is added (current code does not distinguish between master and non-master upper device). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27rocker: use new helper to figure out master kindJiri Pirko1-12/+7
Looking at rtnl kind string is kind of ugly. So use new helpers to do this in nicer way. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: kill long time unused bonding private flagsJiri Pirko1-36/+21
We don't use them for years, just kill them now. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: add netif_is_ovs_master helper with IFF_OPENVSWITCH private flagJiri Pirko2-1/+9
Add this helper so code can easily figure out if netdev is openswitch. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: add netif_is_bridge_master helperJiri Pirko1-0/+5
Add this helper so code can easily figure out if netdev is a bridge. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: introduce change upper device notifier change infoJiri Pirko2-2/+21
Add info that is passed along with NETDEV_CHANGEUPPER event. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27virtio-net: avoid unnecessary sg initialzationJason Wang1-2/+2
Usually an skb does not have up to MAX_SKB_FRAGS frags. So no need to initialize the unuse part of sg. This patch initialize the sg based on the real number it will used: - during xmit, it could be inferred from nr_frags and can_push. - for small receive buffer, it will also be 2. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Move device hash table to geneve socket.Pravin B Shelar1-26/+17
This change simplifies Geneve Tunnel hash table management. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Consolidate Geneve functionality in single module.Pravin B Shelar6-586/+421
geneve_core module handles send and receive functionality. This way OVS could use the Geneve API. Now with use of tunnel meatadata mode OVS can directly use Geneve netdevice. So there is no need for separate module for Geneve. Following patch consolidates Geneve protocol processing in single module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Use Geneve device.Pravin B Shelar2-148/+33
With help of tunnel metadata mode OVS can directly use Geneve devices to implement Geneve tunnels. This patch removes all of the OVS specific Geneve code and make OVS use a Geneve net_device. Basic geneve vport is still there to handle compatibility with current userspace application. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Add support to collect tunnel metadata.Pravin B Shelar3-85/+275
Following patch create new tunnel flag which enable tunnel metadata collection on given device. These devices can be used by tunnel metadata based routing or by OVS. Geneve Consolidation patch get rid of collect_md_tun to simplify tunnel lookup further. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Make dst-port configurable.Pravin B Shelar2-4/+22
Add netlink interface to configure Geneve UDP port number. So that user can configure it for a Gevene device. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.