aboutsummaryrefslogtreecommitdiffstats
path: root/REPORTING-BUGS (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-08-08jffs2: Update copyright noticesDavid Woodhouse19-3/+22
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-08-08mtd-physmap: add support users can assign the probe type in board filesBarry Song2-2/+7
There are three reasons to add this support: 1. users probably know the interface type of their flashs, then probe can be faster if they give the right type in platform data since wrong types will not be detected. 2. sometimes, detecting can cause destory to system. For example, for kernel XIP, detecting can cause NOR enter a mode instructions can not be fetched right, which will make kernel crash. 3. For a new probe which is not listed in the rom_probe_types, if users assign it in board files, physmap can still probe it. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: remove redwood map driverChristian Dietrich3-183/+0
Removing the redwood mtd mapping driver, because all REDWOOD_[456] configuration options were removed from the kernel, because they weren't referenced anywhere. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: Add v3 (i.MX51) SupportSascha Hauer2-2/+222
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: support 8bit eccSascha Hauer1-0/+30
Nand devices with at least 26 bytes of oob data per 512 byte block can have 8bit ecc on v2 type controllers. This is currently not tested, but at least this patch puts the ECC_MODE bit into a well defined state. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: fix correct_data functionSascha Hauer1-2/+40
The v2 controller has a totally different mechanism to check whether the data we read had ecc errors or not. Implement this. The mechanism in the v2 controller happens to be identical to the v3 controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: add V1_V2 namespace to registersSascha Hauer1-78/+63
This prepares the driver for v3 support. The v3 controller has a completely different register layout, so add a V1_V2_ namespace to the register defines to avoid confusion with the v3 regs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: factor out a check_int functionSascha Hauer1-13/+19
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: make some internally used functions overwriteableSascha Hauer1-28/+44
This patch prepares the driver to add v3 controller support later. The v3 controller is basically the same controller as v1 and v2, but with a completely different register layout. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: rework get_dev_statusSascha Hauer1-12/+9
We save/restore the value in the buffer anyway, so it makes no difference whether we use main_area0 or main_area1. So, we can use main_area0 and remove main_area1 from the driver which is otherwise unused. Also, clean up the comments in get_dev_status. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: remove 0xe00 offset from registersSascha Hauer1-18/+18
Add the offset to the register base instead. This is done in preparation for v3 controller support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Add multi connected NAND supportChuanxiao Dong2-1/+22
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove set_ecc_config functionChuanxiao Dong2-40/+48
set_ecc_config function only set ECC_CORRECTION register, so move register setting to probe function. Since controller only support 15bit and 8bit ecc correction, updated nand ecc layout information. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove unuseful code in get_xx_nand_para functionsChuanxiao Dong1-74/+7
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove device_info_tag structureChuanxiao.Dong2-305/+37
Hi David, I sent 4 patches using my intel email account. If there is any problem about the format of these patches, I will resend them after I arrived at home by using my gmail account, and I will keep on using gmail account to send patches. Thanks. >From 242e3bf5e17f54b1df8cf285154a7c7a61ff62e9 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong <chuanxiao.dong@intel.com> Date: Fri, 6 Aug 2010 15:29:41 +0800 Subject: [PATCH 1/4] mtd: denali: Remove device_info_tag structure. Most of the variables in this structure are useless, so just remove this structure and relevant codes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: m25p80: add support for the Winbond W25Q32 SPI flash chipGabor Juhos1-0/+1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-06mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chipsGabor Juhos1-1/+7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chipsGabor Juhos1-0/+4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: cfi_cmdset_0002: consider version 1.4 as a valid primary extension versionGuillaume LECERF1-3/+4
The Spansion S29WS-P device family uses CFI version 1.4 [1]. Consider it as a valid version. [1] http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: atmel_nand: fix warning: 'part_probes' defined but not usedAndreas Bießmann1-1/+1
This patch fixes drivers/mtd/nand/atmel_nand.c:372: warning: 'part_probes' defined but not used which is issued when CONFIG_MTD_PARTITIONS is defined but CONFIG_MTD_CMDLINE_PARTS not. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: change struct flchip_shared spinlock locking into mutexStefani Seibold3-21/+21
This patch prevent to schedule while atomic by changing the flchip_shared spinlock into a mutex. This should be save since no atomic path will use this lock. It was suggested by Arnd Bergmann and Vasiliy Kulikov. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: Missing slab.h includeDavid Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: gen_nand: fix support for multiple chipsMarek Vasut1-1/+1
This patch corrects a problem where gen_nand driver assumed there can be only one chip and ignored the pdata->chip.nr_chips value. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: update description on sm_ftlMaxim Levitsky1-4/+7
I think that scary description can go now... Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: blkdevs: fix crash related to sysfs attributes.Maxim Levitsky1-3/+4
Remove the attributes group before disk to avoid use after free Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali: update get nand para functionsChuanxiao Dong1-72/+35
In denali driver, wTotalBlocks variable is useless, so just remove them in get_toshiba_nand_para and get_hynix_nand_para first. Other wTotalBlocks in denali.c and other variables in dev_info struct are also useless, will remove them later. Also add a parameter in get_hynix_nand_para to prepare to remove dev_info struct. This parameter comes by reading NAND ID directly. Reading register will report wrong value for some NAND chips, e.g. some Micron MT29F32G08QAA chips. So update NAND_CMD_READID method as well. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali: rename functions which is named by using capitalsChuanxiao Dong2-16/+11
rename these functions' name and remove additional declarations in header file Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali.c: fix reserved all check-patch errorsChuanxiao Dong1-49/+53
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali.c: fix all "line over 80 characters" warningsChuanxiao Dong1-108/+192
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali.c: add and update KERN_ facility level in printk()Chuanxiao Dong1-16/+16
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali.c: fixed all open brace { check-patch errorsChuanxiao Dong1-116/+48
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05nand/denali Clean up all white spaces in code indentChuanxiao1-169/+168
Hi, I have changed the outlook mail cliet to be linux mutt client and use my personal gmail to submit patches. Here are 5 new patches to fix nand/denali check patch errors. The other 4 patches will be sent out after this mail. Thanks for your review. >From d125ad3f57bbf517131dccad6b5933edf8c2632a Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong <chuanxiao.dong@intel.com> Date: Tue, 3 Aug 2010 15:54:48 +0800 Subject: [PATCH 1/5] mtd: denali.c: clean up all whitespaces in code indent Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix nand busy detectionBarry Song1-2/+2
The IRQSTAT register is a W1C register used by the interrupt handler and may have its BUSY bit changed. This makes it somewhat unreliable for the polling devready function. So switch it over to use the BUSY bit in the STAT register that always reflects the current state of the hardware. This fixes driver hangs seen when the NAND flash is under heavy system load (like I/O benchmarks). Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix handling of page sizesBarry Song2-41/+48
Rather than forcing the platform resources to declare the desired page size, simply use the existing information passed down to us by the higher layers. This way we work out of the box with all flash chips that the kernel knows about. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: wait for the ECC reset to finishBarry Song1-0/+2
When resetting the ECC registers/counters, the bit will automatically clear itself once the reset has actually finished. So make sure we wait for that to occur before doing anything else rather than assuming everything is peachy and proceeding with stale ECC values. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix typo for read/write delay setupBarry Song1-1/+1
We used the platform rd_dly field when we meant to use the wr_dly field. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: make sure to check NAND_ALE in cmd_ctrlBarry Song1-1/+1
The NAND base may send some controls which are neither CLE nor ALE, so we need to explicitly check both instead of assuming things are always one or the other. Otherwise, we sometimes send out illegal addresses to the NAND device. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix raw page write/read handlingBarry Song1-0/+18
Our write_buf/read_buf funcs always do ECC in HW ECC mode. That is not needed for raw funcs. In fact, write_buf/read_buf should be a pure func for data input/output while chip->ecc.hwctl controls ECC. Unfortunately, we can't separate ECC from normal data input/output in our NFC, so our DMA write_buf/read_buf entries are coupled with ECC operations closely. Thus we need to provide dedicated read_page_raw/write_page_raw funcs where we do non-DMA transactions so as to avoid automatic ECC. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: delete useless comment about jffs2Barry Song1-3/+0
The low level NAND driver doesn't care about filesystems, so punt the local comment indicating otherwise. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: cfi_cmdset_0002: fix the check for valid primary extension versionsGuillaume LECERF1-3/+12
Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3 [1][2]. Fix the check in cfi_cmdset_0002 accordingly. [1] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 [2] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: m25p80: Make jedec_probe() return proper errno valuesAnton Vorontsov1-12/+6
spi_write_then_read() may return its own return codes (e.g. -EIO), so let's propagate the value down to the probe(). Also, remove jedec == 0 check, it isn't needed as nowadays we use dedicated SPI device IDs for non-JEDEC flashes. Suggested-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: m25p80: Fix false-positive probingAnton Vorontsov1-2/+11
Since commit 18c6182bae0acca220ed6611f741034d563cd19f ("Rework probing/JEDEC code"), m25p80 driver successfully registers chips even if JEDEC probing fails. This was needed to support non-JEDEC flashes. Though, it appears that some platforms (e.g. blackfin bf533 stamp[1]) used the old behavior to detect if there's any flash connected, so the driver have to fail on JEDEC probing errors. This patch restores the old behavior for JEDEC flashes, and adds "-nonjedec" SPI device IDs for M25Pxx flashes, so that the kernel still supports non-JEDEC flashes. [1] http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=5975 Reported-by: Mingquan Pan Reported-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: mtdchar: fix mmap for MTD RAM/ROM char devicesAnatolij Gustschin1-1/+27
For no-mmu systems mmap() on RAM/ROM devices already works but for systems with mmu it probably was not tested and doesn't work. This patch allows using mmap() on MTD RAM/ROM devices on systems with MMU. It has been tested on mpc5121e based platform with MR0A16A MRAM device attached over LocalBus. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: ixp4xx: add support for static flash partitionsRichard Cochran1-8/+27
This patch adds support for static flash partitioning from a platform device. Also, we clean up some weirdness where statements were separated by commas instead of semicolons. While we are at it, fix some minor bad white space, too. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: mxc_nand: dont call suspend and resume explicitlyEric Bénard1-42/+1
The mtd layer is responsible to call mtd->{suspend,resume}. Doing it again in the driver is wrong and results in a warning: nand_resume called for a chip which is not in suspended state at resume time. Removing the calls from the resume and suspend functions makes them empty allowing them to be deleted completely. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: doc2000: fix uninitialized variable in doc_ecc_decode()Mark Ware1-2/+3
The variable 'syn' was being used uninitialized. Also fixed incorrect use of syn[] vs s[]. Tested on powerpc board with 64MiB DOC2000. Signed-off-by: Mark Ware <mware@elphinstone.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: OneNAND: Samsung SoCs use own chip_probe functionKyungmin Park1-13/+8
Samsung SoCs use own chip_probe function. Don't touch the memory configuration at probe time. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: OneNAND: Introduce chip_probe functionKyungmin Park2-12/+32
Samsung SoCs use the own OneNAND controler and detect OneNAND chip at power on. To use this feature, introduce the chip_probe function. Also remove workaround for Samsung SoCs. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: onenand:fix for page addr calculation based on device typeRohit Hassan Sathyanarayan1-2/+5
Sending the patch for page address calculation based on device type. This resolves the OneNAND DDP device read problem as pointed by Enric. http://lists.infradead.org/pipermail/linux-mtd/2010-July/030920.html Signed-off-by: Rohit HS <rohit.hs@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: nand: update nand_default_block_markbad()Brian Norris1-10/+24
This is an update that depends on the previous patches I sent. We can now write to all the appropriate BB marker locations (i.e. pages 1 AND 2, bytes 1 AND 6) with nand_default_block_markbad() if necessary, according to the flags marked in chip->options. Note that I removed the line: ofs += mtd->oobsize; Unless I am wrong, this line was completely unnecessary in the first place. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.