aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-06ARC: [plat-hsdk]: Add reset controller node to manage ethernet resetEugeniy Paltsev2-0/+10
DW ethernet controller on HSDK hangs sometimes after SW reset, so add reset node to make possible to reset DW ethernet controller HW. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHzEugeniy Paltsev1-0/+42
Add temporary fix to HSDK platform code to setup CPU frequency to 1GHz on early boot. We can remove this fix when smart hsdk pll driver will be introduced, see discussion: https://www.mail-archive.com/linux-snps-arc@lists.infradead.org/msg02689.html Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: fix allnoconfig build warningVineet Gupta1-1/+1
Reported-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARCv2: boot log: identify HS48 cores (dual issue)Vineet Gupta2-4/+16
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: boot log: decontaminate ARCv2 ISA_CONFIG registerVineet Gupta2-8/+15
ARCv2 ISA_CONFIG and ARC700_BUILD build config registers are not compatible. cpuinfo_arc had isa info placeholder which was mashup of bits form both. Untangle this by defining it off of ARCv2 ISA info and it is fine even for ARC700 since former is a super set of latter (ARC700 buildonly has 2 bits for atomics and stack check). At runtime, we treat ARCv2 ISA info as a generic placeholder but populate it correctly depending on ARC700 or HS. This paves way for adding more HS specific bits in isa info which was colliding with the extra bits for arc700. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03arc: remove redundant UTS_MACHINE define in arch/arc/MakefileMasahiro Yamada1-2/+0
The top-level Makefile sets the default of UTS_MACHINE to $(ARCH). If ARCH and UTS_MACHINE match, arch/$(ARCH)/Makefile need not specify UTS_MACHINE explicitly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-hsdk] use actual clk driver to manage cpu clkEugeniy Paltsev2-3/+11
With corresponding clk driver now merged upstream, switch to it. - core_clk now represent the PLL (vs. fixed clk before) - input_clk represent the clk signal src for PLL (basically xtal) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [*defconfig] Reenable soft lock-up detectorAlexey Brodkin7-7/+7
Commit 92e5aae45778 "kernel/watchdog: split up config options" introduced SOFTLOCKUP_DETECTOR which selects LOCKUP_DETECTOR instead of the latter to be selected itself. We need to adjust our defconfigs accordingly. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequencyEugeniy Paltsev1-1/+8
DW sdio controller has external ciu clock divider controlled via register in SDIO IP. It divides sdio_ref_clk (which comes from CGU) by 16 for default. So default mmcclk clock (which comes to sdk_in) is 25000000 Hz. So fix wrong current value (50000000 Hz) to actual 25000000 Hz. Note this is a preventive fix, in line with similar change for HSDK where this was actually needed. see: http://lists.infradead.org/pipermail/linux-snps-arc/2017-September/002924.html Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequencyEugeniy Paltsev1-1/+11
DW sdio controller has external ciu clock divider controlled via register in SDIO IP. Due to its unexpected default value (it should divide by 1 but it divides by 8) SDIO IP uses wrong ciu clock and works unstable So add temporary fix and change clock frequency from 100000000 to 12500000 Hz until we fix dw sdio driver itself. Fixes SNPS STAR 9001204800 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-axs103] Add temporary quirk to reset ethernet IPEugeniy Paltsev1-0/+7
DW ethernet controller on AXS10x hangs sometimes after SW reset, so add temporary quirk to reset DW ethernet controller IP core. This quirk can be removed after axs10x reset driver (see http://patchwork.ozlabs.org/patch/800273/) or simple reset driver (see https://patchwork.kernel.org/patch/9903375/) will be available in upstream. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-22arch: remove unused *_segments() macros/functionsTobias Klauser1-3/+0
Some architectures define the no-op macros/functions copy_segments, release_segments and forget_segments. These are used nowhere in the tree, so removed them. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-13mm: treewide: remove GFP_TEMPORARY allocation flagMichal Hocko2-2/+2
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08Merge tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds39-194/+725
Pull ARC updates from Vineet Gupta: - Support for HSDK board hosting a Quad core HS38x4 based SoC running @1GHz (and some prerrquisite changes such as ability to scoot the kernel code/data from start of memory map etc) - Quite a few updates for EZChip (Mellanox) platform - Fixes to fault/exception printing * tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (26 commits) ARC: Re-enable MMU upon Machine Check exception ARC: Show fault information passed to show_kernel_fault_diag() ARC: [plat-hsdk] initial port for HSDK board ARC: mm: Decouple RAM base address from kernel link address ARCv2: IOC: Tighten up the contraints (specifically base / size alignment) ARC: [plat-axs103] refactor the DT fudging code ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clk ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk setting ARCv2: SLC: provide a line based flush routine for debugging ARC: Hardcode ARCH_DMA_MINALIGN to max line length we may have ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exit ARC: [plat-eznps] handle extra aux regs #1: save/restore on context switch ARC: [plat-eznps] avoid toggling of DPC register ARC: [plat-eznps] Update the init sequence of aux regs per cpu. ARC: [plat-eznps] new command line argument for HW scheduler at MTM ARC: set boot print log level to PR_INFO ARC: [plat-eznps] Handle user memory error same in simulation and silicon ARC: [plat-eznps] use schd.wft instruction instead of sleep at idle task ARC: create cpu specific version of arch_cpu_idle() ARC: [plat-eznps] spinlock aware for MTM ...
2017-09-08Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2-23/+0
Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
2017-09-07Merge tag 'mmc-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds2-2/+0
Pull MMC updates from Ulf Hansson: "MMC core: - Continue to refactor the mmc block code to prepare for blkmq - Move mmc block debugfs into block module - Next step for eMMC CMDQ by adding a new mmc host interface for it - Move Kconfig option MMC_DEBUG from core to host - Some additional minor improvements MMC host: - Declare structs as const when applicable - Explicitly request exclusive reset control when applicable - Improve some error paths and other various cleanups - sdhci: Preparations to support SDHCI OMAP - sdhci: Improve some PM related code - sdhci: Re-factoring and modernizations - sdhci-xenon: Add runtime PM and system sleep support - sdhci-xenon: Add support for eMMC HS400 Enhanced Strobe - sdhci-cadence: Add system sleep support - sdhci-of-at91: Improve system sleep support - dw_mmc: Add support for Hisilicon hi3660 - sunxi: Add support for A83T eMMC - sunxi: Add support for DDR52 mode - meson-gx: Add support for UHS-I SD-cards - meson-gx: Cleanups and improvements - tmio: Fix CMD12 (STOP) handling - tmio: Cleanups and improvements - renesas_sdhi: Add r8a7743/5 support - renesas-sdhi: Add support for R-Car Gen3 SDHI DMAC - renesas_sdhi: Cleanups and improvements" * tag 'mmc-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits) mmc: renesas_sdhi: Add r8a7743/5 support mmc: meson-gx: fix __ffsdi2 undefined on arm32 mmc: sdhci-xenon: add runtime pm support and reimplement standby mmc: core: Move mmc_start_areq() declaration mmc: mmci: stop building qcom dml as module mmc: sunxi: Reset the device at probe time clk: sunxi-ng: Provide a default reset hook mmc: meson-gx: rework tuning function mmc: meson-gx: change default tx phase mmc: meson-gx: implement voltage switch callback mmc: meson-gx: use CCF to handle the clock phases mmc: meson-gx: implement card_busy callback mmc: meson-gx: simplify interrupt handler mmc: meson-gx: work around clk-stop issue mmc: meson-gx: fix dual data rate mode frequencies mmc: meson-gx: rework clock init function mmc: meson-gx: rework clk_set function mmc: meson-gx: rework set_ios function mmc: meson-gx: cfg init overwrite values mmc: meson-gx: initialize sane clk default before clock register ...
2017-09-04Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-35/+7
Pull locking updates from Ingo Molnar: - Add 'cross-release' support to lockdep, which allows APIs like completions, where it's not the 'owner' who releases the lock, to be tracked. It's all activated automatically under CONFIG_PROVE_LOCKING=y. - Clean up (restructure) the x86 atomics op implementation to be more readable, in preparation of KASAN annotations. (Dmitry Vyukov) - Fix static keys (Paolo Bonzini) - Add killable versions of down_read() et al (Kirill Tkhai) - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini) - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra) - Remove smp_mb__before_spinlock() and convert its usages, introduce smp_mb__after_spinlock() (Peter Zijlstra) * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits) locking/lockdep/selftests: Fix mixed read-write ABBA tests sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK() acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures smp: Avoid using two cache lines for struct call_single_data locking/lockdep: Untangle xhlock history save/restore from task independence locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being futex: Remove duplicated code and fix undefined behaviour Documentation/locking/atomic: Finish the document... locking/lockdep: Fix workqueue crossrelease annotation workqueue/lockdep: 'Fix' flush_work() annotation locking/lockdep/selftests: Add mixed read-write ABBA tests mm, locking/barriers: Clarify tlb_flush_pending() barriers locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive locking/lockdep: Explicitly initialize wq_barrier::done::map locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING locking/refcounts, x86/asm: Implement fast refcount overflow protection locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease ...
2017-09-04Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-5/+0
Pull RCU updates from Ingo Molnad: "The main RCU related changes in this cycle were: - Removal of spin_unlock_wait() - SRCU updates - RCU torture-test updates - RCU Documentation updates - Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant - Miscellaneous RCU fixes - CPU-hotplug fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) arch: Remove spin_unlock_wait() arch-specific definitions locking: Remove spin_unlock_wait() generic definitions drivers/ata: Replace spin_unlock_wait() with lock/unlock pair ipc: Replace spin_unlock_wait() with lock/unlock pair exit: Replace spin_unlock_wait() with lock/unlock pair completion: Replace spin_unlock_wait() with lock/unlock pair doc: Set down RCU's scheduling-clock-interrupt needs doc: No longer allowed to use rcu_dereference on non-pointers doc: Add RCU files to docbook-generation files doc: Update memory-barriers.txt for read-to-write dependencies doc: Update RCU documentation membarrier: Provide expedited private command rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter() rcu: Add warning to rcu_idle_enter() for irqs enabled rcu: Make rcu_idle_enter() rely on callers disabling irqs rcu: Add assertions verifying blocked-tasks list rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit() rcu: Add TPS() protection for _rcu_barrier_trace strings rcu: Use idle versions of swait to make idle-hack clear swait: Add idle variants which don't contribute to load average ...
2017-09-04Merge branch 'linus' into locking/core, to fix up conflictsIngo Molnar2-3/+10
Conflicts: mm/page_alloc.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-01ARC: Re-enable MMU upon Machine Check exceptionJose Abreu2-3/+6
I recently came upon a scenario where I would get a double fault machine check exception tiriggered by a kernel module. However the ensuing crash stacktrace (ksym lookup) was not working correctly. Turns out that machine check auto-disables MMU while modules are allocated in kernel vaddr spapce. This patch re-enables the MMU before start printing the stacktrace making stacktracing of modules work upon a fatal exception. Cc: stable@kernel.org Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: moved code into low level handler to avoid in 2 places]
2017-09-01ARC: Show fault information passed to show_kernel_fault_diag()Jose Abreu2-2/+5
Currently we pass a string argument to show_kernel_fault_diag() which describes the reason for the fault. This is not being used so just add a pr_info() which outputs the fault information. With this change we get from: | | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #30 | task: 9a254780 task.stack: 9a212000 | | [ECR ]: 0x00200400 => Other Fatal Err | to: | | Unhandled Machine Check Exception | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #37 | task: 9a240780 task.stack: 9a226000 | |[ECR ]: 0x00200400 => Machine Check (Other Fatal Err) | Which can help debugging. Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-hsdk] initial port for HSDK boardAlexey Brodkin8-2/+358
This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Note that PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: mm: Decouple RAM base address from kernel link addressEugeniy Paltsev8-10/+18
[Needed for HSDK] Currently the first page of system (hence RAM base) is assumed to be @ CONFIG_LINUX_LINK_BASE, where kernel itself is linked. However is case of HSDK platform, for reasons explained in that patch, this is not true. kernel needs to be linked @ 0x9000_0000 while DDR is still wired at 0x8000_0000. To properly account for this 256M of RAM, we need to introduce a new option and base page frame accountiing off of it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: renamed CONFIG_KERNEL_RAM_BASE_ADDRESS => CONFIG_LINUX_RAM_BASE : simplified changelog]
2017-09-01ARCv2: IOC: Tighten up the contraints (specifically base / size alignment)Eugeniy Paltsev1-8/+19
[Needed for HSDK] - Currently IOC base is hardcoded to 0x8000_0000 which is default value of LINUX_LINK_BASE, but may not always be the case - IOC programming model imposes the constraint that IOC aperture size needs to be aligned to IOC base address, which we were not checking so far. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked the changelog]
2017-09-01ARC: [plat-axs103] refactor the DT fudging codeVineet Gupta1-24/+22
with clk frequency setting code gone by prev commits, we can elide the unconditonal DT parsing to the specific case of quad core config where we possibly need to fudge the DT value. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clkEugeniy Paltsev2-4/+18
Add core pll node (core_clk) to manage cpu frequency. core_clk represents pll itself. input_clk represents clock signal source (basically xtal) which comes to pll input. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk settingEugeniy Paltsev1-113/+5
historically axs103 platform code used to set the cpu clk by writing to PLL registers directly. however the axs10x clk driver is now upstream so no need to do this amymore. Driver is selected automatically when CONFIG_ARC_PLAT_AXS10X is set Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: deleted more code not needed anymore]
2017-08-30ARCv2: SLC: provide a line based flush routine for debuggingVineet Gupta2-1/+55
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-30ARC: Hardcode ARCH_DMA_MINALIGN to max line length we may haveAlexey Brodkin1-1/+2
Current implementation relies on L1 line length which might easily be smaller than L2 line (which is usually the case BTW). Imagine this typical case: L2 line is 128 bytes while L1 line is 64-bytes. Now we want to allocate small buffer and later use it for DMA (consider IOC is not available). kmalloc() allocates small KMALLOC_MIN_SIZE-sized, KMALLOC_MIN_SIZE-aligned That way if buffer happens to be aligned to L1 line and not L2 line we'll be flushing and invalidating extra portions of data from L2 which will cause cache coherency issues. And since KMALLOC_MIN_SIZE is bound to ARCH_DMA_MINALIGN the fix could be simple - set ARCH_DMA_MINALIGN to the largest cache line we may ever get. As of today neither L1 of ARC700 and ARC HS38 nor SLC might not be longer than 128 bytes. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-30arc: remove num-slots from arc platformsShawn Lin2-2/+0
dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Acked-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-28ARCv2: SMP: Mask only private-per-core IRQ lines on boot at core intcAlexey Brodkin2-3/+10
Recent commit a8ec3ee861b6 "arc: Mask individual IRQ lines during core INTC init" breaks interrupt handling on ARCv2 SMP systems. That commit masked all interrupts at onset, as some controllers on some boards (customer as well as internal), would assert interrutps early before any handlers were installed. For SMP systems, the masking was done at each cpu's core-intc. Later, when the IRQ was actually requested, it was unmasked, but only on the requesting cpu. For "common" interrupts, which were wired up from the 2nd level IDU intc, this was as issue as they needed to be enabled on ALL the cpus (given that IDU IRQs are by default served Round Robin across cpus) So fix that by NOT masking "common" interrupts at core-intc, but instead at the 2nd level IDU intc (latter already being done in idu_of_init()) Fixes: a8ec3ee861b6 ("arc: Mask individual IRQ lines during core INTC init") Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> [vgupta: reworked changelog, removed the extraneous idu_irq_mask_raw()] Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-28ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exitLiav Rehana3-0/+33
Preserve eflags and gpa1 aux during entry/exit into kernel as these could be modified by kernel mode These registers used by compare exchange instructions. - GPA1 is used for compare value, - EFLAGS got bit reflects atomic operation response. EFLAGS is zeroed for each new user task so it won't get its parent value. Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] handle extra aux regs #1: save/restore on context switchNoam Camus4-1/+52
save EFLAGS, and GPA1 auxiliary registers during context switch, since they may be changed by the new task in kernel mode, while using atomic ops e.g. cmpxchg. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] avoid toggling of DPC registerElad Kanfi2-0/+13
HW bug description: in case of HW thread context switch the dpc configuration of the exiting thread is dragged one cycle into the next thread. In order to avoid the consequences of this bug, the DPC register is set to an initial value, and not changed afterwards. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] Update the init sequence of aux regs per cpu.Liav Rehana2-1/+12
This commit add new configuration that enables us to distinguish between building the kernel for platforms that have a different set of auxiliary registers for each cpu and platforms that have a shared set of auxiliary registers across every thread in each core. On platforms that implement a different set of auxiliary registers disabling this configuration insures that we initialize registers on every cpu and not just for the first thread of the core. Example for non shared registers is working with EZsim (non silicon) Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] new command line argument for HW scheduler at MTMNoam Camus1-2/+25
We add ability for all cores at NPS SoC to control the number of cycles HW thread can execute before it is replace with another eligible HW thread within the same core. The replacement is done by the HW scheduler. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: simplified handlign of out of range argument value]
2017-08-28ARC: set boot print log level to PR_INFONoam Camus3-5/+5
Some of the boot printing code had printk() w/o explicit log level. This patch introduces consistency allowing platforms to switch to less verbose console logging using cmdline. NPS400 with 4K CPUs needs to avoid the cpu info printing for faster bootup. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] Handle user memory error same in simulation and siliconNoam Camus3-1/+21
On ARC700 (and nSIM), user mode memory error triggers an L2 interrupt which is handled gracefully by kernel (or it tries to despite this being imprecise, and error could get charged to kernel itself). The offending task is killed and kernel moves on. NPS hardware however raises a Machine Check exception for same error which is NOT recoverable by kernel. This patch aligns kernel handling for nSIM case, to same as hardware by overriding the default user space bus error handler. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Elad Kanfi <eladkan@mellanox.com> [vgupta: rewrote changelog] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] use schd.wft instruction instead of sleep at idle taskNoam Camus2-1/+13
When HW threads are active we want CPU to enter idle state only for the calling HW thread and not to put on sleep all HW threads sharing this core. For this need the NPS400 got dedicated instruction so only calling thread is entring sleep and all other are still awake and can execute instructions. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked patch to not use inline ifdef but a new function itself]
2017-08-28ARC: create cpu specific version of arch_cpu_idle()Vineet Gupta3-7/+16
This paves way for creating a 3rd variant needed for NPS ARC700 without littering ifdey'ery all over the place Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] spinlock aware for MTMNoam Camus1-0/+6
This way when we execute "ex" during trying to hold lock we can switch to other HW thread and utilize the core intead of just spinning on a lock. We noticed about 10% improvement of execution time with hackbench test. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: spinlock: Document the EX based spin_unlockVineet Gupta1-0/+6
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] disabled stall counter due to a HW bugNoam Camus1-2/+0
This counter represents threshold for consecutive stall which would trigger HW threads scheduling. However when enabled, low threshhold values cause performance degradation and in the worst case even livelock. So disable it by resorting to HW reset value Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: fixed changelog]
2017-08-28ARC: [plat-eznps] Fix TLB ErrataNoam Camus1-0/+9
Due to a HW bug in NPS400 we get from time to time false TLB miss. Workaround this by validating each miss. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: [plat-eznps] typo fix at KconfigNoam Camus1-2/+2
Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: typos fix in kernel/entry-compact.SLiav Rehana1-11/+11
Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28ARC: typo fix in mm/fault.cLiav Rehana1-1/+1
Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-25futex: Remove duplicated code and fix undefined behaviourJiri Slaby1-35/+5
There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a29703 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile] Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org> Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64] Cc: linux-mips@linux-mips.org Cc: Rich Felker <dalias@libc.org> Cc: linux-ia64@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: peterz@infradead.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: sparclinux@vger.kernel.org Cc: Jonas Bonn <jonas@southpole.se> Cc: linux-s390@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-hexagon@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-snps-arc@lists.infradead.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-xtensa@linux-xtensa.org Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Stafford Horne <shorne@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Henderson <rth@twiddle.net> Cc: Chris Zankel <chris@zankel.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-parisc@vger.kernel.org Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-alpha@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
2017-08-25Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar25-70/+153
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21Merge tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds25-70/+153
Pull ARC fixes from Vineet Gupta: - PAE40 related updates - SLC errata for region ops - intc line masking by default * tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: Mask individual IRQ lines during core INTC init ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses ARC: dma: implement dma_unmap_page and sg variant ARCv2: SLC: Make sure busy bit is set properly for region ops ARC: [plat-sim] Include this platform unconditionally ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103 ARC: defconfig: Cleanup from old Kconfig options