aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/armada-38x.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-07-06ARM: dts: armada-38x: use the new thermal bindingBaruch Siach1-1/+1
Commit 2f28e4c24b10e (thermal: armada: Clarify control registers accesses) introduced the new thermal binding. The new binding extends the second registers field size to 8. Switch to the new binding to fix thermal reading values. Without this change the fix for errata #132698 introduced in commit 8c0b888f661 (thermal: armada: Change sensors trim default value) has no effect. Cc: stable@vger.kernel.org # v4.16+ Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-06-11Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-3/+3
Pull ARM SoC device tree updates from Olof Johansson: "As always, a large number of DT updates. Too many to enumerate them all, but at a glance: New SoCs introduced in this release: - Amlogic: + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set top boxes and other products. - Mediatek: + MT7623A, which is a flavor of the MT7623 family with other on-chip ethernet options. - Qualcomm: + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845 (Cortex-A75/A55 derivative) SoC that's one of the current high-end mobile SoCs. It's great to see mainline support for it. So far, you can't do much with it, since a lot of peripherals are not yet in the DTs but driver support for USB, GPU and other pieces are starting to trickle in. This might end up being a well-supported SoC upstream if the momentum keeps up. - Renesas: + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly awaiting more. So far, basic drivers such as serial, gpios, PMU and ethernet are enabled. + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR GPU. Same here, basic set of drivers such as serial, gpios and ethernet enabled, and SMP support is also forthcoming. - STMicroelectronics: + STM32F469, very similar tih STM32F429 but with display support Enhancements to SoCs/platforms (DTS contents, some driver portions might not be in yet): - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces - Marvell Berlin2CD: SMP support, thermal sensors - Mediatek MT7623: Highspeed DMA, audio support - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support - Renesas: Watchdog and PMU support across many platforms - Rockchip RK3399: USB3 OTG support - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3 - STMicro STM32: Lots of peripherals added to STM32MP175C - Uniphier: Ethernet support New boards: - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version) - Allwinner A33: Nintendo NES/SuperNES Classic Edition - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune - Berlin2CD: Valve Steam Link - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1 - Broadcom: Raspberry Pi 3 B+ - Mediatek MT7623N and MT7623A: reference boards - Meson 8M2: Tronsmart MXIII Plus - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj - Qualcomm MSM8974: Sony Xperia Z1 Compact support - Qualcomm SDM845: MTP development board - Renesas: Ebisu R8A77990 board - Renesas RZ/G1C: iwg23s: iWave G235-SDB - TI am335x: Pocketbeagle support" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits) ARM: dts: aspeed: Fix hwrng register address arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog arm64: dts: sprd: Add GPIO and GPIO keys device nodes arm64: dts: sprd: fix typo in 'remote-endpoint' arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator arm64: dts: fix regulator property name for wlan pcie endpoint arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS ARM: dts: pxa3xx: fix MMC clocks ARM: pxa: dts: add pin definitions for extended GPIOs ARM: pxa: dts: add gpio-ranges to gpio controller ARM: dts: ipq8074: Enable few peripherals for hk01 board ARM: dts: ipq8074: Add pcie nodes ARM: dts: ipq8074: Add peripheral nodes ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi ARM: dts: ipq4019: Change the max opp frequency ...
2018-05-18ARM: dts: armada-38x: update NAND node with new bindingsMiquel Raynal1-3/+3
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-04-23serial: 8250_dw: Limit dw8250_tx_wait_empty quirk to armada-38x devicesJoshua Scott1-2/+2
The previous implementation has had a detrimental effect on devices using high bitrates (bluetooth), as the fifo being non-empty for a single check would result in a 10 µs delay. Limit the change to devices with the new "marvell,armada-38x-uart" compatible string. Also update the code to allow the first 1000 retries to not perform a delay. The maximum duration of retries has been increased to cover a worst-case seen on the Armada 385 SoC. "dmesg ; resize", will fill the buffer with text to output before doing a resize. At 9600 baud this took up to 13 ms to flush all characters and avoid some getting lost. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-27arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCsGregory CLEMENT1-38/+1
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2017-12-15ARM: dts: armada-38x: Add NAND RB pinctrl informationSean Nyekjaer1-0/+5
Add pin control information for the NAND flash interface. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-10-26ARM: dts: mvebu: pl310-cache disable double-linefillYan Markman1-2/+2
Under heavy system stress mvebu SoC using Cortex A9 sporadically encountered instability issues. The "double linefill" feature of L2 cache was identified as causing dependency between read and write which lead to the deadlock. Especially, it was the cause of deadlock seen under heavy PCIe traffic, as this dependency violates PCIE overtaking rule. Fixes: c8f5a878e554 ("ARM: mvebu: use DT properties to fine-tune the L2 configuration") Cc: stable@vger.kernel.org Signed-off-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> [gregory.clement@free-electrons.com: reformulate commit log, add Armada 375 and add Fixes tag] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-10-02ARM: dts: Fix I2C repeated start issue on Armada-38xKalyan Kinthada1-2/+2
All the Armada 38x(380, 385, 388) have a silicon issue in the I2C controller which violates the I2C repeated start timing (errata FE-8471889). i2c-mv64xxx driver handles this errata based on the compatible string "marvell,mv78230-a0-i2c". This patch activates the "marvell,mv78230-a0-i2c" compatible string for the I2C controller on armada-38x SoC based devices. Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-03ARM: dts: armada-38x: Add arm_global_timer nodeMarcin Wojtas1-0/+7
Since generic Cortex-A9 global timer is available after adding it to compilation, enable its node in armada-38x.dtsi. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-17ARM: dts: mvebu: Add PWM properties for armada-38xRalph Sennhauser1-4/+12
Add the required properties to the GPIO nodes for them to be used as PWM lines. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-04-12ARM: dts: armada-38x: label USB and SATA nodesRalph Sennhauser1-4/+4
Recently most nodes got labels to make them referenceable. The USB 3.0 nodes as well as the nodes for the SATA controllers were left out, rectify the omission. The labels "sataX" are already used by some boards for the SATA ports, therefore use "ahciX" to label the SATA controller nodes. To avoid potential confusion by labeling an USB3.0 controller "usb2" use usb3_X as labels. This also coincides with the node names themselves (usb@xxxxx vs usb3@xxxxx). Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-08ARM: dts: armada-38x: Adjust mbus controller description on Armada 38xGregory CLEMENT1-1/+2
The mbus binding had been extended more than two years ago, but the device tree files for Armada 38x didn't change. Adding this third entry will allow the mbus going to suspend which was the last thing preventing the SoC going to standby mode Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-07ARM: dts: armada-38x add node labelsChris Packham1-19/+19
As was done with Armada XP, add node labels to Armada 38x common and SoC specific nodes to make them easier to reference in board device trees. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-01-03ARM: dts: mvebu: Correct license textAlexandre Belloni1-5/+5
The license text has been mangled at some point then copy pasted across multiple files. Restore it to what it should be. Note that this is not intended as a license change. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-07ARM: dts: mvebu: Update comment for main PLL frequencyChris Packham1-1/+1
The actual frequency was updated in commit ae142bd99765 ("ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs") but the comment was not updated. Update it now. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-08-26ARM: dts: armada-38x: Add NAND pinctrl informationChris Packham1-0/+9
Add pin control information for the NAND flash interface. This interface is multiplexed with the device bus interface to the function is "dev" not "nand" as one might expect. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-08-08ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' nodeStefan Roese1-24/+24
This patch moves all Armada 370/XP/38x/39x SPI controller nodes from the 'internal-regs' node down into the 'soc' node. This is in preparation to enable the usage of the SPI direct access mode. A follow-up patch will add the static MBus mappings for the SPI devices into the 'reg' property of the SPI controller DT node. By moving these SPI controller nodes, this patch also makes use of the labels rather than keeping the tree structure. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-03-20Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-9/+21
Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, plus a couple of related 64-bit updates: New SoC support: - Allwinner A83T - Axis Artpec-6 SoC - Mediatek MT7623 SoC - TI Keystone K2G SoC - ST Microelectronics stm32f469 New board or machine support: - ARM Juno R2 - Buffalo Linkstation LS-QVL and LS-GL - Cubietruck plus - D-Link DIR-885L - DT support for ARM RealView PB1176 and PB11MPCore - Google Nexus 7 - Homlet v2 - Itead Ibox - Lamobo R1 - LG Optimus Black - Logicpd dm3730 - Raspberry Pi Model A Other changes include - Lots of updates for Qualcomm APQ8064, MSM8974 and others - Improved support for Nokia N900 and other OMAP machines - Common clk support for lpc32xx - HDLCD display on ARM - Improved stm32f429 support - Improved Renesas device support, r8a779x and others - Lots of Rockchip updates - Samsung cleanups - ADC support for Atmel SAMA5D2 - BCM2835 (Raspberry Pi) improvements - Broadcom Northstar Plus enhancements - OMAP GPMC rework - Several improvements for Atmel SAMA5D2 / Xplained - Global change to remove inofficial "arm,amba-bus" compatible string" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits) ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" ARM: dts: artpec: dual-license on artpec6.dtsi ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT arm64: dts: juno/vexpress: fix node name unit-address presence warnings arm64: dts: foundation-v8: add SBSA Generic Watchdog device node ARM: dts: at91: sama5d2 Xplained: add leds node ARM: dts: at91: sama5d2 Xplained: add user push button ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host ARM: dts: stm32f429: Enable Ethernet on Eval board ARM: dts: omap3-sniper: TWL4030 keypad support Revert "ARM: dts: DRA7: Add dt nodes for PWMSS" ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND ARM: dts: dm814x: dra62x: Fix NAND device nodes ARM: dts: stm32f429: Add Ethernet support ARM: dts: stm32f429: Add system config bank node ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes ARM: dts: at91: sama5d2: add dma properties to UART nodes ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs ...
2016-03-14ARM: dts: armada-38x: add buffer manager nodesMarcin Wojtas1-0/+19
Armada 38x network controller supports hardware buffer management (BM). Since it is now enabled in mvneta driver, appropriate nodes can be added to armada-38x.dtsi - for the actual common BM unit (bm@c8000) and its internal SRAM (bm-bppi), which is used for indirect access to buffer pointer ring residing in DRAM. Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional parameters are supposed to be set in board files. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38xThomas Petazzoni1-9/+21
On Armada 38x, the available network interfaces are: - port 0, at 0x70000 - port 1, at 0x30000 - port 2, at 0x34000 Due to the rule saying that DT nodes should be ordered by register addresses, the network interfaces are probed in this order: - port 1, at 0x30000, which gets named eth0 - port 2, at 0x34000, which gets named eth1 - port 0, at 0x70000, which gets named eth2 (if all three ports are enabled at the board level) Unfortunately, the network subsystem doesn't provide any way to rename network interfaces from the kernel (it can only be done from userspace). So, the default naming of the network interfaces is very confusing as it doesn't match the datasheet, nor the naming of the interfaces in the bootloader, nor the naming of the interfaces on labels printed on the board. For example, on the Armada 388 GP, the board has two ports, labelled GE0 and GE1. One has to know that GE0 is eth1 and GE1 is eth0, which isn't really obvious. In order to solve this, this patch proposes to exceptionaly violate the rule of "order DT nodes by register address", and put the 0x70000 node before the 0x30000 node, so that network interfaces get named in a more natural way. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-02mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0Marcin Wojtas1-0/+1
The Ethernet controller found in the Armada 38x SoC's family support TCP/IP checksumming with frame sizes larger than 1600 bytes, however only on port 0. This commit enables it by setting 'tx-csum-limit' to 9800B in 'ethernet@70000' node. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09ARM: mvebu: add crypto related nodes to armada 38x dtsiBoris Brezillon1-0/+33
Add crypto related nodes in armada-38x.dtsi. [gregory.clement@free-electrons.com: Fix typo for compatible string armada38x instead of armada375] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-07-09ARM: mvebu: use DT properties to fine-tune the L2 configurationThomas Petazzoni1-0/+4
In order to optimize the L2 cache performance, this commit adjusts the configuration of the L2 on the Cortex-A9 based Marvell EBU processors (Armada 375, 38x and 39x), using the appropriate DT properties. We enable double linefill, incr double linefill, data prefetch and disable double linefill on wrap. This matches the configuration that was fine tuned in the Marvell BSP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-07-09ARM: mvebu: use armada-380-xor on Armada 38x and 39xThomas Petazzoni1-2/+2
The Armada 38x and 39x SoC support have an updated XOR hardware block compared to previous SoCs. These features can be enabled by using the 'armada-380-xor' compatible string, available since commit 6f166312c6ea ("dmaengine: mv_xor: add support for a38x command in descriptor mode"). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-06-11Merge tag 'v4.1-rc6' into next/dtKevin Hilman1-1/+1
Linux 4.1-rc6 Conflicts: arch/arm/boot/dts/zynq-7000.dtsi Resolution summary: Mainline had an earlier version of the commit, resolve in favor of the newer patch in next/dt branch.
2015-05-27ARM: mvebu: use improved armada spi device tree compatible name for each SoCGregory CLEMENT1-2/+4
Use the new compatible introduced in order to benefit of a wider and more accurate range of baud rates to be used. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-11ARM: mvebu: add alias for mdio on Armada 38xImre Kaloz1-1/+1
This allows us to reference it later. Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2015-05-01ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCsGregory CLEMENT1-1/+1
Whereas for Armada 370 and XP the main PLL frequency was 2GHz for the Armada 375, 38x and 39x, the frequency is 1GHz. When writing support for these last SoCs, there was no official value for the PLL. Now that we have it, this patch fixes it in the device tree. This value is currently only used by the NAND driver for the setting the NAND timing. Fortunately it is not actually used: all the mainline board with a NAND flash comes with a NAND device tree node using the "marvell,nand-keep-config" property. With this property the timings are not modified in the kernel driver and are kept from the bootloader. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marcin Wojtas <mw@semihalf.com>
2015-03-17ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoCEzequiel Garcia1-0/+5
The Armada 380 and 385 SoCs have a Cortex-A9 CPU, so the PMU is available to be used. This commit enables it in the devicetree. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: add serial port aliases on Armada 370/375/38x/XPThomas Petazzoni1-0/+2
This commit adds 'serialX' aliases for the various serial ports on Armada 370, 375, 38x and XP platforms. It will allow the usage of the stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XPThomas Petazzoni1-3/+0
Having aliases for Ethernet devices is useless, since the networking subsystem unfortunately doesn't care about aliases to name network interfaces. Note that the 'aliases' nodes in armada-370-xp.dtsi and armada-xp.dtsi become empty, but that we keep it as is since a followup patch will re-add some aliases to it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: add missing UART labels on Armada 38xThomas Petazzoni1-1/+1
The Armada 38x had a label for UART0, but not UART1. This commit fixes that. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: fix usb@ unit address on Armada 38x to match register addressThomas Petazzoni1-1/+1
On Marvell Armada 38x, the USB2 controller registers are at 0x58000, so the corresponding Device Tree node should have a unit address of 58000, and not 50000. We were using 50000 due to an incorrect copy/pastebin of Armada 370/XP code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: Fix MPIC unit addressMaxime Ripard1-1/+1
The unit-address is supposed to be equal the first reg address, which is not the case for the MPIC, that uses the mbus-controller one. Fix this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-23ARM: mvebu: Update the SDHCI node on Armada 38xGregory CLEMENT1-1/+4
The binding of the armada-380-sdhci has been extended with a new register in order to be able to use the SDR50 and DDR50 mode. This commit add the resource associated to this new register for the Armada 38x. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-23ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci nodeGregory CLEMENT1-1/+1
Instead of hardcoding the values of the interrupt flags, use the macros provided by <include/dt-bindings/interrupt-controller/irq.h> and <include/dt-bindings/interrupt-controller/arm-gic.h> for the Armada 38x SDHCI node. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-17Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-9/+127
Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
2015-02-13ARM: mvebu: add Device Tree description of RTC on Armada 38xGregory CLEMENT1-0/+7
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC used in the other mvebu SoCs until now. This commit adds the Device Tree description of this interface at the SoC level. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Arnaud Ebalard <arno@natisbad.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-26ARM: mvebu: armada-38x: Relicense the device tree under GPLv2+/X11Gregory CLEMENT1-3/+37
The current GPL only licensing on the device tree makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Marcin Wojtas <mw@semihalf.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2015-01-10ARM: mvebu: fix compatible strings of MBus on Armada 375 and Armada 38xThomas Petazzoni1-2/+1
Due to the special handling of window 13 on Armada 375 and Armada 38x (similar to Armada XP), the MBus hardware block is *not* compatible with the one used on Armada 370. Using the Armada 370 compatible string on Armada 375 and 38x will lead to a non-working device if window 13 ends up being used. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: a38x: Add missing labelsGregory CLEMENT1-2/+2
The pintcrl label was missing. Adding it allowed referring it from the root of the device tree. Also add the uart0 label used by the bootloader. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: a38x: Add more pinctrl functionsGregory CLEMENT1-0/+47
With the Armada 385 GP board more pinctrl functions depending of the SoC are needed. Add them to the DTSI to avoid duplication. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: Add a number of pinctrl functionsMaxime Ripard1-0/+39
Some pinctrl functions can be shared with all DTS out there, since they are generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid duplication. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: A38x: Remove redundant pinctrl informationsMaxime Ripard1-1/+0
The compatible set in the armada-38x DTSI is always overridden, and the reg defined in there is duplicated in the armada-380 and armada-385 DTSIs. Remove these useless items. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: a38x: Fix node namesMaxime Ripard1-2/+2
Some nodes in the DTs have a reg property but no unit name in their node name. This contradicts the way the ePAPR defines the node names. Fix this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2014-11-22ARM: mvebu: adjust ethernet aliases according to U-Boot requirements for A38xMarcin Wojtas1-3/+3
In order to update MAC address entries in the ethernet nodes in Device Tree both mainline U-Boot and Barebox bootloaders accept the same format of aliases, which is 'ethernetX', where X stands for an interface number. Other platforms in the mainline Linux, that comprise ethernet references in '/aliases' node (like various flavours of imx or sunXi), follow the naming scheme described above. This commit ajusts ethernet aliases of Marvell Armada 38x SoC to be properly recognized by bootloaders' MAC address fixup routines. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1415980652-7429-5-git-send-email-mw@semihalf.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-20Merge tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson1-0/+5
Merge "ARM: mvebu: DT changes for v3.17 (round 2)" from Jason Cooper: mvebu DT changes for v3.17 (round 2): - kirkwood * Add d2 Network v2 board - mvebu * Add Armada 375 ethernet node * Add CA9 MPcore SoC controller node * Add support for dynamic freq scaling on Armada XP * tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: update Armada XP DT for dynamic frequency scaling ARM: mvebu: add CA9 MPcore SoC Controller node ARM: mvebu: Enable the network controller in Armada 375 DB board ARM: mvebu: Add support for the network controller in Armada 375 SoC ARM: Kirkwood: add DT support for d2 Network v2 ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16ARM: mvebu: add CA9 MPcore SoC Controller nodeGregory CLEMENT1-0/+5
The CA9 MPcore SoC Control block is a set of registers that allows to configure certain internal aspects of the core blocks of the SoC (Cortex-A9, L2 cache controller, etc.). In most cases, the default values are fine so they aren't many reasons to touch those registers, but there is one exception: to support cpuidle on Armada 38x, we need to modify the value of the CA9 MPcore Reset Control register. Therefore, this commit adds a new Device Tree binding for this hardware block, and uses this new binding for the Armada 38x Device Tree file. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: devicetree@vger.kernel.org Link: https://lkml.kernel.org/r/1404913221-17343-11-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-24ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcardGregory CLEMENT1-1/+1
Wildcards in compatible strings should be avoid. "marvell,armada38x" was recently introduced but was not yet used. The armada 385 SoC is a superset of the armada 380 SoC (with more CPUs and more PCIe slots). So this patch replaces the use of "marvell,armada38x" by the "marvell,armada380" string. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1403533011-21339-1-git-send-email-gregory.clement@free-electrons.com Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-23Merge tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann1-0/+24
Merge "mvebu DT changes for v3.16 (incremental #2)" from Jason Cooper: - kirkwood - add OpenRD boards - make keymile boards bootable with latest kernels - mvebu - add ehci/xhci to Armada 375/38x boards * tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file ARM: dts: kirkwood: add kirkwood-km_common DTSI files ARM: dts: kirkwood: resynch 98dx4122 dtsi ARM: mvebu: add Device Tree description for the EHCI controllers on Armada 375 ARM: mvebu: add Device Tree description of the xHCI controller on Armada 375 ARM: mvebu: add Device Tree description of the EHCI controller on Armada 38x ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38x ARM: Kirkwood: DT versions of OpenRD boards Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.