aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/armada-xp-axpwifiap.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-05-25ARM: mvebu: add "jedec,spi-nor" flash compatible bindingRafał Miłecki1-1/+1
Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification. Use it for all flashes that are supposed to support READ ID op according to the datasheets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: use stdout-path in all armada-*.dtsThomas Petazzoni1-1/+1
This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property, and gets rid of /chosen/bootargs which becomes unneeded: earlyprintk should not be used by default, and the console= parameter is replaced by the /chosen/stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-01-26ARM: mvebu: armada-xp-axpwifiap: Relicense the device tree under GPLv2+/X11Gregory CLEMENT1-3/+37
The current GPL only licensing on the device tree makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-21ARM: mvebu: make DTS comments reflect DEBUG_LL changesPaul Bolle1-2/+4
The Kconfig symbol DEBUG_MVEBU_UART_ALTERNATE was renamed to DEBUG_MVEBU_UART0_ALTERNATE. And the symbol DEBUG_MVEBU_UART1_ALTERNATE was added to allow UART1 as a DEBUG_LL target. Make the comment at the top of this DTS reflect those changes. Since we're touching this DTS add comments to show which blocks describe UART0 and UART1. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2014-11-26arm: mvebu: normalize pinctrl entries for Armada SoCsArnaud Ebalard1-6/+6
There are currently 2 differents naming conventions used between the existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s) and pmx_*: pmx-*) with a vast majority of files using the former: $ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l 155 $ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l 13 In fact, only some Armada XP files are using the second variant. This patch normalizes those files (mainly ge0/1 entries) to use the first variant. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22arm: mvebu: define and use common Armada XP SPI pinctrl settingArnaud Ebalard1-7/+0
This patch defines common Armada XP pinctrl settings in armada-xp.dtsi for the supported SPI interface (MPP36-39) and use it as default for Armada XP spi interface. That being done, it removes the now redundant definitions in armada-xp-axpwifiap.dts. Note: this patch has the potential to break out-of-tree users w/o specific pinctrl settings for their spi interfaces if the default above does not match their config (i.e. if they do not use CS0). Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/d404b7abd80ee5a0fd8e8d3586d33cd37740d589.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-02ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMIISebastian Hesselbarth1-16/+2
Pinctrl settings for GE0 and GE1 are not only usable on RD-AXPWiFiAP. Moreover, naming the RGMII settings pmx-ge{0,1} is not precise enough as there is also a GMII setting for GE0. Move the pinctrl sub-nodes to the common pinctrl node and rename them to pmx-ge{0,1}-rgmii. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-By: Benoit Masson <yahoo@perenite.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-02ARM: mvebu: armada-xp: Use pinctrl node aliasSebastian Hesselbarth1-34/+34
Armada XP pinctrl node gained an alias, make use of it. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-By: Benoit Masson <yahoo@perenite.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-02ARM: mvebu: armada-xp: Add node alias to pinctrl and add base addressSebastian Hesselbarth1-1/+1
In other MVEBU SoCs, the pin controller node is called pin-ctrl with its base address added. Also, we have a node alias to access the pinctrl node easily. Fix this for Armada XP pinctrl nodes to be consistent with other SoCs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-By: Benoit Masson <yahoo@perenite.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-26ARM: mvebu: remove clock-frequency of serial port Device Tree nodesThomas Petazzoni1-2/+0
Now that the Armada 370/375/38x/XP SoC-level Device Tree files have the proper "clocks" property in their UART controllers node, it is no longer useful to have the clock-frequency property defined in the board-level Device Tree files. Therefore, this commit gets rid of all the useless 'clock-frequency' properties. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397806908-7550-5-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-11ARM: mvebu: use input DT defines in Armada 370/XP boardsThomas Petazzoni1-1/+2
Instead of harcoding keycodes specifications in the Armada 370/XP boards, use the <dt-bindings/input/input.h> header file and its keycode definitions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-11ARM: mvebu: use GPIO DT defines in Armada 370/XP boardsThomas Petazzoni1-1/+2
Instead of harcoding 0 and 1 for the gpio specifications in the Armada 370/XP boards, use the <dt-bindings/gpio/gpio.h> header file and its GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW definitions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-07ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT bindingEzequiel Garcia1-25/+25
The ranges property needs to be changed to use the new MBus DT binding. Also, the pcie-controller node needs to be relocated as according the MBus DT binding, it's now a child of the mbus-compatible node. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-07ARM: mvebu: add support for the AXP WiFi AP boardThomas Petazzoni1-0/+164
The AXP WiFi AP board is a Marvell platform based on the Armada XP MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI flash, Ethernet ports, SATA port, button, UART. Untested: NAND flash, due to lack of mainline support for the Armada 370/XP NAND controller for now. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Seif Mazareeb <seif@marvell.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.