aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-30Merge tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dtArnd Bergmann1-23/+23
Pull" ARM: at91: DT for 4.15" from Alexandre Belloni: - sama5d2 xplained: add charger and SD card power supply - sama5d27_som1_ek: many adjustments - at91sam9x25ek: add pwm0 and can1 * tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: at91sam9x5ek: use DMA for USART0 ARM: dts: at91: at91sam9x25ek: add pwm0 ARM: dts: at91: at91sam9x25ek: add CAN1 interface ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0 ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0 ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0 ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source ARM: dts: at91: sama5d27_som1_ek: update serial aliases ARM: dts: at91: sama5d27_som1_ek: enable i2c2 ARM: dts: at91: sama5d27_som1_ek: add disabled status ARM: dts: at91: usb_a9g20: fix rtc node ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply ARM: dts: at91: sama5d2_xplained: Add charger node
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-3/+3
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC linesNicolas Ferre1-2/+2
As the board have the proper pull-ups soldered on the data and CMD lines we don't need them specified in the PADs. So remove the "bias-pull-up" property and set "bias-disable". Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0Nicolas Ferre1-12/+0
CAN0 is not connected on the sama5d27_som1_ek board, so remove it from DT. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0Claudiu Beznea1-2/+4
Add pin muxing for pwm0 and set it as disabled since it is in conflict with the pins for leds. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: add aliases for i2cLudovic Desroches1-0/+2
Add aliases for i2c devices to not rely on probe order for i2c device numbering. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> [claudiu.beznea@microchip.com: remove i2c0, change subject] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup sourceLudovic Desroches1-0/+1
Set the USER button as a wakeup source to allow wakeup from ULP0. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: update serial aliasesLudovic Desroches1-0/+6
Overwrite sama5d2.dtsi aliases node to match the at91-sama5d27_som1_ek board configuration. ttyS0 stands for DBGU, ttyS1 for the mikro BUS 1 serial lines and ttyS2 for the mikro BUS 2 serial lines. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: enable i2c2Claudiu Beznea1-2/+2
Enable i2c. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-10ARM: dts: at91: sama5d27_som1_ek: add disabled statusClaudiu Beznea1-6/+7
Add disabled statuses for all devices and for those those which pins are in conflict with other devices add a comment in the DT file to specify this. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: fix USB host vbusNicolas Ferre1-1/+4
The USB host has 3 ports so we must specify the entries for each in the atmel,vbus-gpio property. The specified pin (PA27) is the vbus for USBB and not USBA. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: fix typosLudovic Desroches1-2/+2
Fix typos that prevent proper using of uart2 and uart4 devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USBLudovic Desroches1-6/+6
There are some changes from the prototype board concerning LEDs and USB pins: - USBB power enable and red LED pins are inverted. - The polarity of LEDs is inverted too. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-07-17ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK supportClaudiu Beznea1-0/+537
Add specifig DTS files and bindings for sama5d27 SoM1 EK board. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.