aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/da850.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-05-30ARM: dts: da850: Add interrupt-controller property to gpio nodeKeerthy1-0/+2
The gpio node has 144 gpios. Each gpio is capable of generating an interrupt. Hence add interrupt-controller property to the gpio node. With this in place one can use interrupts property in device tree to request for the gpio interrupts. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-05-30ARM: dts: da850: Add CPPI 4.1 DMA to USB OTG controllerAlexandre Bailon1-1/+26
This adds CPPI 4.1 DMA controller to USB OTG controller. Changes since v2: - Fixed the the property reg-names (had glue register defined) - Removed few useless property Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-30ARM: dts: da850: move spi0_cs3_pin pinconf nodeDavid Lechner1-0/+6
This moves the spi0_cs3_pin pinconf node from the LEGO EV3 file to the common DA850 include file. This node is applicable to any board, and therefore belongs in the common file. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07ARM: dts: da850-evm: add the output port to the vpif nodeBartosz Golaszewski1-1/+7
Extend the vpif node with an output port with a single channel. NOTE: this is still mostly just hardware description - the actual driver is registered using pdata-quirks. We need the node however for correct pin control function selection. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07ARM: dts: da850: add vpif video display pinsBartosz Golaszewski1-2/+15
Add a new pinctrl sub-node for vpif display pins. Move VP_CLKIN3 and VP_CLKIN2 to the display node where they actually belong (vide section 36.2.2 of the OMAP-L138 technical reference manual). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31ARM: dts: da850: add the SATA nodeBartosz Golaszewski1-0/+6
Add the SATA node to the da850 device tree. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-13ARM: dts: da850: Add ti,da830-uart compatible for serial portsDavid Lechner1-3/+6
TI DA8xx/OMAPL13x/AM17xx/AM18xx SoCs have extra UART registers beyond the standard 8250 registers, so we need a new compatible string to indicate this. Also, at least one of these registers uses the full 32 bits, so we need to specify reg-io-width in addition to reg-shift. "ns16550a" is left in the compatible specification since it does work as long as the bootloader configures the SoC UART power management registers. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-10ARM: dts: davinci: da850: VPIF: add node and muxingKevin Hilman1-1/+24
Add VPIF node and pins to da850 SoC. VPIF has two input channels which can be described using the standard DT ports and endpoints. Signed-off-by: Kevin Hilman <khilman@baylibre.com> [nsekhar@ti.com: drop stray newline, typo fixes in commit message] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-07ARM: dts: da850: Add usb device nodeAxel Haslam1-0/+8
Add the usb1 device node for the da850 soc. This will allow boards to use the usb1 port when booting through DT. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02ARM: dts: da850: specify the maximum pixel clock rate for tilcdcBartosz Golaszewski1-0/+1
At maximum CPU frequency of 300 MHz the maximum pixel clock frequency is 37.5 MHz[1]. We must filter out any mode for which the calculated pixel clock rate would exceed this value. Specify the max-pixelclock property for the display node for da850-lcdk. [1] http://www.ti.com/lit/ds/symlink/am1808.pdf (SPRS653E, revised March 2014, table 6-110) Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [nsekhar@ti.com: commit message update] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02ARM: dts: da850: rename the display node labelBartosz Golaszewski1-1/+1
The tilcdc node name is 'display' as per the ePAPR 1.1 recommendation. The label is also 'display', but change it to 'lcdc' to make it clear what the underlying hardware is. Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-12-07Merge tag 'davinci-for-v4.10/dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dtOlof Johansson1-0/+9
- Add device tree nodes for pin pull-up/pull-down bias control on DA850. - Enable high speed support on DA850 MMC/SD * tag 'davinci-for-v4.10/dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-05ARM: dts: da850: enable high speed for mmcAxel Haslam1-0/+4
The mmc controller in da850 supports high speed modes so add cap-sd-highspeed and cap-mmc-highspeed. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-12-01ARM: dts: da850: Add node for pullup/pulldown pinconfDavid Lechner1-0/+5
This SoC has a separate pin controller for configuring pullup/pulldown bias on groups of pins. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-30Merge tag 'davinci-for-v4.10/dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dtArnd Bergmann1-0/+2
Pull "DaVinci DT updates for v4.10 (part 3)" from Sekhar Nori: Some fixes for device-tree patches already queued. - Fix SD card detect polarity - Prevent Ethernet from picking a random mac address - Fix error messages on platforms which dont use bus master and emif priority settings. * tag 'davinci-for-v4.10/dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: da850-lcdk: fix mmc card detect polarity
2016-11-30Merge tag 'davinci-for-v4.10/dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dtArnd Bergmann1-0/+18
Pull "DaVinci DT updates for v4.10 (part 2)" from Sekhar Nori: Adds device tree nodes enabling DDR controller and bus master priority settings needed for stable LCDC operation on DA850. Also adds support for MUSB device on DA850 providing USB OTG support. * tag 'davinci-for-v4.10/dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Enable the usb otg device node ARM: dts: da850: Add the usb otg device node ARM: dts: da850: add the mstpri and ddrctl nodes
2016-11-28ARM: dts: da850: enable memctrl and mstpri nodes per boardBartosz Golaszewski1-0/+2
Currently the memory controller and master priorities drivers are enabled in da850.dtsi. For boards for which there are no settings defined, this makes these drivers emit error messages. Disable the nodes in da850.dtsi and only enable them for da850-lcdk - the only board that currently needs them. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-20ARM: dts: da850: Add the usb otg device nodeAlexandre Bailon1-0/+10
This adds the device tree node for the usb otg controller present in the da850 family of SoC's. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-18Merge tag 'omap-for-v4.10/pinctrl-cells-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dtOlof Johansson1-0/+1
Add #pinctrl-cells for pinctrl-single using dts files. This allows us to use generic parser later on. Note that the driver supports handling the legacy binding also with no #pinctrl-cells so these changes can be queued separately from the driver changes. * tag 'omap-for-v4.10/pinctrl-cells-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add #pinctrl-cells for pinctrl-single instances Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-15ARM: dts: da850: add the mstpri and ddrctl nodesBartosz Golaszewski1-0/+8
Add the nodes for the MSTPRI configuration and DDR2/mDDR memory controller drivers to da850.dtsi. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-07ARM: dts: Add #pinctrl-cells for pinctrl-single instancesTony Lindgren1-0/+1
Drivers using pinctrl-single,pins have #pinctrl-cells = <1>, while pinctrl-single,bits need #pinctrl-cells = <2>. Note that this patch can be optionally applied separately from the driver changes as the driver supports also the legacy binding without #pinctrl-cells. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-01ARM: dts: da850: Add cfgchip syscon nodeDavid Lechner1-0/+10
Add a syscon node for the SoC CFGCHIPn registers. It includes a child node for the USB PHY that is part of this range of registers. Signed-off-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: drop OF_DEV_AUXDATA() addition] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31ARM: dts: da850: Add DMA to SPI0David Lechner1-0/+2
Add the bindings for DMA on SPI0 Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31ARM: dts: da850: add a node for the LCD controllerKarl Beldan1-0/+28
Add pins used by the LCD controller and a disabled LCDC node to be reused in device trees including da850.dtsi. Signed-off-by: Karl Beldan <kbeldan@baylibre.com> [Bartosz: - added the commit description - changed the dt node name to a generic one - added a da850-specific compatible string - removed the tilcdc,panel node - moved the pins definitions to da850.dtsi as suggested by Sekhar Nori (was in: da850-lcdk.dts)] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [nsekhar@ti.com: fix compatible property and remove interrupt-parent] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-08-18ARM: dts: da850,da850-evm: Add an aemif node and use it for the NANDKarl Beldan1-27/+8
Currently the davinci da8xx boards use the mach-davinci aemif code. Instantiating an aemif node into the DT allows to use the ti-aemif memory driver and is another step to better DT support. This change adds an aemif node in the dtsi while retiring the nand_cs3 node. The NAND is now instantiated in the dts as a subnode of the aemif one along with its pins. Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-08-09ARM: dts: da850: Add missing pin muxing for the UARTsKarl Beldan1-0/+36
This adds 2 pinctrl groups (rtscts, rxtx) for each of the 3 UARTs. Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-08-09ARM: dts: da850: Add new ECAP and EPWM bindingsCooper Jr., Franklin1-5/+10
For some devices, the PWMSS is a parent of eCAP and ePWM and provides the functional clocks for those submodules. The ti,am33xx-ecap and ti,am33xx-ehrpwm bindings were based on this parent child relationship where the functional clock would be grabbed from the module's parent. However, DA850 doesn't have a PWMSS and the eCAP and ePWM provides their functional clock themselves. Therefore, prefer the new binding that doesn't assume this parent child relationship. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-05-10Merge tag 'davinci-for-v4.7/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dtArnd Bergmann1-2/+26
Merge "DaVinci DT updates for v4.7 (part 2)" from Sekhar Nori: Second set of DT updates for DaVinci adding support for SPI0 and some low priority fixes for ethernet and interrupt controller. * tag 'davinci-for-v4.7/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: There are 101 interrupts. ARM: dts: da850: disable mdio and eth0 in da850.dtsi ARM: davinci: da8xx-dt: Add spi0 lookup for clock matching ARM: dts: da850: add spi0 to device tree
2016-04-25ARM: dts: da850: There are 101 interrupts.David Lechner1-1/+1
Fix off by one error in da850 device tree in the number of INTC interrupts. Signed-off-by: David Lechner <david@lechnology.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [nsekhar@ti.com: commit message update] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-25ARM: dts: da850: disable mdio and eth0 in da850.dtsiDavid Lechner1-0/+2
Disable mdio and eth0 in da850.dtsi file. All other devices are disabled by default and not all boards will use these devices, so these should be disabled too. da850-evm.dtb already had status = "okay" for these devices. da850-enbw-cmc.dts did not, so they were added. Signed-off-by: David Lechner <david@lechnology.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [nsekhar@ti.com: commit description updates] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-25ARM: dts: da850: add spi0 to device treeDavid Lechner1-1/+23
Add device node and pinmux for SoC spi0. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-24Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dtArnd Bergmann1-2/+2
Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) * tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits) ARM: dts: Add support for dra72-evm rev C (SR2.0) ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board ARM: dts: am335x-chili*: Move uart0 description from SOM to board ARM: dts: am43xx: add support for clkout1 clock ARM: dts: omap3-beagle: Provide NAND ready pin ARM: dts: am335x: Provide NAND ready pin ARM: dts: am437x: Provide NAND ready pin ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: dm816x: Enable gpio controller for GPMC ARM: dts: dm814x: Enable gpio controller for GPMC ARM: dts: omap3: Enable gpio controller for GPMC ARM: dts: am4372: Enable gpio controller for GPMC ARM: dts: am335x: Enable gpio controller for GPMC ARM: dts: dra7: Enable gpio controller for GPMC ARM: dts: omap5: Enable gpio and interrupt controller for GPMC ARM: dts: omap4: Enable gpio and interrupt controller for GPMC ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC ARM: dts: omap4-kc1: Power off support ARM: dts: omap4-kc1: LEDs support ...
2016-04-14ARM: DTS: da850: add node for i2c1Petr Kulhavy1-0/+14
da850 has two I2C controllers, but the node for i2c1 was missing. Add node for i2c1 controller and i2c1 pinmux pins. Signed-off-by: Petr Kulhavy <petr@barix.com> [nsekhar@ti.com: fix indentation] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14ARM: dts: davinci: use proper address after @David Lechner1-26/+26
TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14ARM: DTS: da850: fix missing #gpio-cells in gpio nodePetr Kulhavy1-0/+1
The gpio node is missing the mandatory property #gpio-cells, which is causing runtime errors when using GPIOs e.g. with gpio-leds or gpio-keys: "could not get #gpio-cells for /soc/gpio@1e26000" This fixes the problem and adds the missing parameter. The value is 2 according to the gpio-davinci.txt binding. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-12ARM: dts: da850/am4372/am33xx: Use generic node name for ehrpwmFranklin S Cooper Jr1-2/+2
When possible generic node names should be used. So change the node name from ehrpwm to pwm. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-24ARM: DTS: da850: Enable DMA for SPI1Peter Ujfalusi1-0/+2
Add the needed bindings so the SPI driver can use DMA with SPI1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Add node for mmc1Peter Ujfalusi1-0/+8
da850 has two MMC controller, MMCSD1 is served by eDMA1 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Enable DMA use for MMC0Peter Ujfalusi1-0/+2
Add the needed bindings for MMC0 in order to be able to utilize the DMA instead of PIO mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Enable eDMA1Peter Ujfalusi1-0/+17
The eDMA1 in da850 has only one TPTC and for example MMC1 is HW events are handled by it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Use the new DT bindings for the eDMA3Peter Ujfalusi1-5/+21
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: fix edma0 reg spacePeter Ujfalusi1-1/+2
The size of the eDMA0 CC register space is 0x8000 and not 0x10000. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-26ARM: DTS: da850: Add node for McASPPeter Ujfalusi1-0/+13
Node for mcasp0 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-26ARM: DTS: da850: Add node for edma0Peter Ujfalusi1-0/+6
Add DT node for edma0. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-15ARM: davinci: da850: add GPIO DT nodeKV Sujith1-0/+14
Add DT node for Davinci GPIO driver. Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-22ARM: davinci: da850: do not specify clock_frequency for UART DT nodeManjunathappa, Prakash1-3/+0
DT kernel on da850-evm comes up with garbled UART logs. This is because of mismatch in actual module clock rate and rate specified(clock-frequency) in DT blob. kernel should not assume or depend on bootloaders clock configuration, instead let it find the clock rate at runtime. Issue discussed here before arriving on this implementation: "ARM: davinci: da850 evm: update clock rate for UART 1/2 DT nodes" https://patchwork.kernel.org/patch/2162271/ Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-22ARM: davinci: da850: add DT node for ethernetLad, Prabhakar1-0/+30
Add ethernet device tree node information and pinmux for mii to da850 by providing interrupt details and local mac address. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-22ARM: davinci: da850: add DT node for mdio deviceLad, Prabhakar1-0/+13
Add mdio device tree node information to da850 by providing register details and bus frequency of mdio. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-06-26ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pinsManjunathappa, Prakash1-1/+1
function-mask DT property is now a mask for a pin at each pin offset inside a given pincontrol register. Fix DA850 DT data to reflect this change. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> [nsekhar@ti.com: reword commit message for clarity] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-06-20ARM: davinci: da850: Use #include for all device treesPhilip Avinash1-1/+1
Replace /include/ by #include for da850 device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.