aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dove.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-03-06ARM: dove: drop pinctrl PMU reg propertySebastian Hesselbarth1-2/+1
Marvell Dove's pinctrl does require some PMU regs for muxing PMU functions to MPP pins. Recently, a discussion started about consolidating Power Management Unit (PMU) into a single DT node. As we don't want anymore DT ABI in the way, drop the corresponding reg property from pinctrl node now. The driver will derive the registers from existing reg properties. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: dove: add system controller nodeSebastian Hesselbarth1-0/+5
This adds a DT node for the system-controller found on Marvell Dove SoCs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: dove: add global-config register nodeSebastian Hesselbarth1-0/+6
We share global config registers by syscon node, add it to dove.dtsi. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: dove: add additional pinctrl registersSebastian Hesselbarth1-1/+3
Dove pinctrl uses additional registers to control MPPs. This patch first increases existing pinctrl reg property by one register, and then adds two new ranges for MPP4 and PMU MPP registers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22Merge tag 'tags/mvebu-dt-fixes-3.14' into mvebu/dtJason Cooper1-11/+0
mvebu dt fixes for v3.14 - mvebu: add missing 'eth3' alias for mv78260 - dove: revert PMU interrupt controller node, wait for driver to land.
2014-02-18ARM: dove: dt: revert PMU interrupt controller nodeJason Cooper1-11/+0
The corresponding driver didn't make it into v3.14, so we need to remove the node. Dove systems fail to boot with the node present and no driver. This node will be re-added when the driver makes it to mainline. Reported-by: Jean-Francois Moine <moinejf@free.fr> Tested-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-17ARM: dove: Enable Dove watchdog in the devicetreeEzequiel Garcia1-0/+8
Add the devicetree node to enable watchdog support available in Dove SoCs. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-01-24Merge tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds1-2/+0
Pull devicetree updates from Rob Herring: - Add new documents with guidelines for DT binding stability and review process. This is one of the outcomes of Kernel Summit DT discussions - Remove a bunch of device_type usage which is only for OF and deprecated with FDT - Fix a long standing issue with compatible string match ordering - Various minor binding documentation updates * tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: add rockchip vendor prefix serial: vt8500: Add missing binding document for arch-vt8500 serial driver. dt/bindings: submitting patches and ABI documents DT: Add vendor prefix for Emerging Display Technologies of: add vendor prefixe for EPFL of: add vendor prefix for Gumstix of: add vendor prefix for Ka-Ro electronics GmbH devicetree: macb: Document clock properties dts: bindings: trivial clock bindings doc fixes of: Fix __of_device_is_available check dt/bindings: Remove device_type "serial" from marvell,mv64360-mpsc dt/bindings: remove device_type "network" references dt/bindings: remove users of device_type "mdio" dt/bindings: Remove references to linux,phandle properties dt/bindings: Remove all references to device_type "ethernet-phy" of: irq: Ignore disabled intc's when searching map of: irq: Ignore disabled interrupt controllers OF: base: match each node compatible against all given matches first dt-bindings: add GIC-400 binding
2014-01-16dt/bindings: remove device_type "network" referencesGrant Likely1-1/+0
device_type is deprecated and the kernel doesn't require it in most cases. The only exceptions for flat tree users are the "gianfar", "ucc_geth" and "ibm,emac" bindings, and arguably that requirement could be relaxed for ucc_geth and ibm,emac (that is a task for separate patches though). This patch removes references to device_type="network" from the binding documentation where possible and removes the properties from ARM and microblaze dts files. This patch does not modify the powerpc .dts files since there are a much larger number of them affected and I think the ucc_geth, ibm,emac and gianfar users should be addressed before clearing out the references to reduce the chance of breakage. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org>
2014-01-16dt/bindings: Remove all references to device_type "ethernet-phy"Grant Likely1-1/+0
The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-22Phy: Add DT nodes on kirkwood and Dove for the SATA PHYAndrew Lunn1-0/+11
Add nodes for the two SATA PHYs on kirkwood. Add node for the one SATA PHY on Dove. Add pHandles to the PHYs in the sata nodes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-12ARM: dove: sort DT nodes by addressJason Cooper1-248/+248
Prevent future (unnecessary) merge conflicts Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-26ARM: Dove: Add RTC interrupt via PMU interrupt controller.Andrew Lunn1-0/+2
The RTC on Dove has an interrupt on the PMU interrupt controller. Add this interrupt to the RTC node. Tested using the "RTC Driver Test Example" Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-26ARM: Dove: Add DT node for PMU interrupt controller.Andrew Lunn1-0/+9
Instantiate the PMU interrupt controller which Dove has. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-24ARM: dove: Fix typo in device_type property of phy nodeSrinivas Kandagatla1-1/+1
This patch fixes a typo for device_type property of phy node. This can work as of today but once a checks are added in generic code this typo will stop phy from working. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2013-10-09ARM: Dove: Add the audio device to the Cubox DTJean-Francois Moine1-0/+10
This patch activates the audio device of the Cubox. The audio flow (pin mpp_audio1) is output on both I2S and S/PDIF. The third si5351 clock (#2, pin mpp13) is used as the external clock. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-09ARM: Dove: Add the audio devices in DTJean-Francois Moine1-0/+18
This patch adds the nodes to instantiate the audio devices of the Dove boards. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30ARM: dove: add PCIe controllers to SoC DTSebastian Hesselbarth1-0/+54
This adds a node for the pcie controllers found on Dove SoCs to the SoC DT include. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30ARM: dove: relocate internal registers device nodesSebastian Hesselbarth1-481/+474
With mbus node in place, now relocate all internal device nodes to internal-regs node with proper address ranges. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30ARM: dove: add MBus DT nodeSebastian Hesselbarth1-0/+20
This adds a MBus node including ranges and pcie apertures required later. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30ARM: dove: add MBUS_ID macro to Dove DTSebastian Hesselbarth1-0/+2
This adds a macro used for defining address window's target ID and attribute cells for the MBus ranges entry. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-12ARM: dove: add cpu device tree nodeSebastian Hesselbarth1-19/+214
This adds a node for the Marvell Sheeva PJ4A CPU found on Dove SoCs. While at it, also move the l2-cache node out of internal registers and consistently name different nodes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Conflicts: arch/arm/boot/dts/dove.dtsi
2013-07-25ARM: dove: move device tree nodes to DT irqchip and clocksourceSebastian Hesselbarth1-2/+19
With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Dove boards. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25ARM: dove: add gigabit ethernet and mvmdio device tree nodesSebastian Hesselbarth1-0/+35
This patch adds orion-eth and mvmdio device tree nodes for DT enabled Dove boards. As there is only one ethernet controller on Dove, a default phy node is also added with a note to set its reg property on a per-board basis. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-21Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtArnd Bergmann1-0/+5
From Nicolas Ferre <nicolas.ferre@atmel.com>: DT modifications for at91rm9200 and at91sam9x5 SoCs, mainly around I2C. Also some cleanup of some unneeded properties and conflicting nodes. One more DT-only board based on at91rm9200. * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91/at91sam9x5cm: add 1-wire chip on CM board ARM: at91/at91sam9x5ek: i2c1 and i2c2 conflict with macb and lcd ARM: at91/dt: gpio-keys: remove address-cells and size-cells properties ARM: at91: add MPA 1600 DT board ARM: at91: add pinctrl nodes to i2c-gpio on RM92000 DT ARM: at91: add TWI bindings to RM9200 DT ARM: at91: dt: at91sam9x5: add i2c-gpio pinctrl ARM: at91: dt: at91sam9x5: add i2c pinctrl Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12Dove: Thermal: Add DT node and enable in defconfigAndrew Lunn1-0/+5
Add a device tree node to instantiate the dove thermal driver. Enable the driver and the thermal framework in dove_defconfig. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08ARM: Dove: add RTC device nodeJean-Francois Moine1-0/+5
The commit: 48be9ac ARM: Dove: split legacy and DT setup removed the RTC initialization. This patch re-enables the RTC via the DT. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: dove: convert serial DT nodes to clocks propertySebastian Hesselbarth1-4/+4
of_serial now has support for using clocks property and we have a DT clock provider. This patch replaces the hard coded clock-frequency property with a clocks phandle to tclk. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Dove: convert usb host controller to DTSebastian Hesselbarth1-0/+16
With DT support for orion-ehci also convert Dove to it and remove the legacy calls and clock aliases. This patch is based on "ARM: Dove: split legacy and DT setup" applied to mvebu/boards recently. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-23Dove: activate GPIO interrupts in DTJean-Francois Moine1-0/+2
In a DT, the interrupts of an interrupt-controller are not usable when #interrupt-cells is missing. This patch activates the interrupts of the GPIOs 0 and 1 for the Marvell Dove SoC. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-07ARM: Dove: Add pinctrl clock to DTSebastian Hesselbarth1-0/+1
During merge of the mvebu patches a clock gate for pinctrl was lost. This patch just readds the clock gate. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-12-14Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+62
Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson: "This is a branch with updates for Marvell's mvebu/kirkwood platforms. They came in late-ish, and were heavily interdependent such that it didn't make sense to split them up across the cross-platform topic branches. So here they are (for the second release in a row) in a branch on their own." * tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits) arm: l2x0: add aurora related properties to OF binding arm: mvebu: add Aurora L2 Cache Controller to the DT arm: mvebu: add L2 cache support dma: mv_xor: fix error handling path dma: mv_xor: fix error checking of irq_of_parse_and_map() dma: mv_xor: use request_irq() instead of devm_request_irq() dma: mv_xor: clear the window override control registers arm: mvebu: fix address decoding armada_cfg_base() function ARM: mvebu: update defconfig with I2C and RTC support ARM: mvebu: Add SATA support for OpenBlocks AX3-4 ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4 ARM: mvebu: Add support for I2C on OpenBlocks AX3-4 ARM: mvebu: Add support for I2C controllers in Armada 370/XP arm: mvebu: Add hardware I/O Coherency support arm: plat-orion: Add coherency attribute when setup mbus target arm: dma mapping: Export a dma ops function arm_dma_set_mask arm: mvebu: Add SMP support for Armada XP arm: mm: Add support for PJ4B cpu and init routines arm: mvebu: Add IPI support via doorbells arm: mvebu: Add initial support for power managmement service unit ...
2012-11-24ARM: Dove: Convert to DT GPIO and pinctrlSebastian Hesselbarth1-3/+16
Following the ongoing conversion of Orion SoCs to DT, make use of gpio and pinctrl drivers through DT. The main dtsi for Dove is prepared to allow board specific descriptors to make use of pinctrl muxing. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-20arm: dove: Convert Dove to DT XOR DMA engineSebastian Hesselbarth1-0/+42
With DT support for Marvell XOR DMA engine, make use of it on Dove. Also remove the now redundant code in DT board init for xor engines. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20ARM: dove: switch to DT clock providersSebastian Hesselbarth1-0/+20
With true DT clock providers available switch Dove clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT at all. Therefore, some clock aliases are created until the devices also move to DT. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-10-17ARM: dove: Add crypto engine to DTSebastian Hesselbarth1-0/+9
Make use of DT support for the crypto engine on dove and remove the obsolete init call. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Remove watchdog from DTSebastian Hesselbarth1-5/+0
The watchdog on dove requires an interrupt that is not yet available on DT. Therefore, the watchdog DT node is removed until the corresponding chained intc is available. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Restructure SoC device tree descriptorSebastian Hesselbarth1-12/+18
This patch adds proper ranges for all mapped addresses within dove SoC and moves the interrupt controller node inside the simple-bus node. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Fix tauros2 device tree initSebastian Hesselbarth1-0/+5
During the review process of dove DT patches, Tauros2 cache init call was changed and DT support added. This patch fixes the call to Tauros2 init and adds a DT node. Moreover, plat/irq.h include was missing from mach-dove/common.c. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21ARM: dove: add device tree descriptorsSebastian Hesselbarth1-0/+143
This patch adds device tree decriptors for dove SoC and currently supported boards. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.