aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx23-olinuxino.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-09ARM: dts: imx: use generic node name for fixed regulatorShawn Guo1-1/+4
The device tree specification recommends that generic name should be used for nodes. So instead of naming those fixed regulator nodes arbitrarily, let's use the generic name 'regulator@num' for those nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig definesLothar Waßmann1-6/+6
Convert mx23/mx28 dts files to use the padconfig defintions from mxs-pinfunc.h. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headersLothar Waßmann1-3/+3
Convert mx23/mx28 dts filed to use the pinctrl header files. NOTE: During automatic conversion of these files to use the pinconfig definitions an inconsistency has been found in: arch/arm/boot/dts/imx28-apx4devkit.dts According to the comment the function for pad SSP2_SS0 should have been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131 represents: MX28_PAD_SSP2_SS0__AUART3_TX I used the later (though probably wrong) definition because that's what is actually being used in the DTB. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: dts: imx23-olinuxino: enable Low Resolution ADCOtavio Salvador1-0/+4
The i.MX23 has a internal Low Resolution ADC; this enables the support for this device. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07ARM: dts: imx23-olinuxino: mark sdcard cd as brokenAlexandre Pereira da Silva1-0/+1
The imx23-olinuxino sdcard doesn't have card detect. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25ARM: dts: imx23-olinuxino: Fix IOMUX settingsFabio Estevam1-4/+4
On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17 is the USB PHY reset. So make the IOMUX assignment properly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-20ARM: imx23-olinuxino: Add spi supportFadil Berisha1-0/+9
imx23-olinuxino board has spi pins exposed on external connector. This patch add spi support. Signed-off-by: Fadil Berisha <f.koliqi@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15ARM: dts: imx23-olinuxino: Use pinctrl for gpio-ledFabio Estevam1-0/+11
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.5: pins are not configured from the driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15ARM: dts: imx23-olinuxino: Remove unneeded "default-on"Fabio Estevam1-2/+1
The initial state of the gpio led can be set directly in "gpios" node. Hence, linux,default-trigger can be removed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-19ARM: dts: imx23-olinuxino: Add USB host supportFabio Estevam1-0/+26
Add USB host support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23ARM: olinuxino: Add gpio-led supportFabio Estevam1-0/+25
Olinuxino has a LED connected to MX23_PAD_SSP1_DETECT__GPIO_2_1 pin. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: imx23-olinuxino.dts: Add AUART0 supportFabio Estevam1-0/+6
Add AUART0 support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-05ARM: mx23: Add initial support for olinuxino boardFabio Estevam1-0/+44
mx23-olinuxino is a low cost board designed by Olimex. It has the following features: - Freescale iMX233 ARM926J processor at 454MHz -64 MB RAM -SD-card connector -TV PAL/NTSC video output -2 USB High Speed Hosts -Ethernet 100 Mbit -Stereo Audio Input -Stereo Headphones Audio Output More information at: http://www.olimex.com/dev/imx233-olinuxino-maxi.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.