aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx27.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-05-16ARM: dts: imx27-pdk: Add keypad supportFabio Estevam1-0/+1
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx27: Place the usb phy nodes in the board dts filesFabio Estevam1-22/+0
It is not a good approach to have the USB PHY nodes inside imx27.dtsi since the USB PHYs on mx27 are not internal to the SoC. Place the USB PHY nodes in the board dts files instead. Also, each board may have a different clock source for the USB PHY, so do not hardcode it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx27: Use the correct usb clock gateFabio Estevam1-3/+3
USB Host1, Host2 and OTG are gated via 'usb_ipg_gate' clock, so fix it in order to avoid the following kernel oops: usbcore: registered new interface driver usb-storage 10024000.usb supply vbus not found, using dummy regulator Unhandled fault: external abort on non-linefetch (0x808) at 0xf4424184 Internal error: : 808 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc1-26325-g971f9fd-dirty #64 task: c7829aa0 ti: c7836000 task.ti: c7836000 PC is at ci_hdrc_probe+0x3a4/0x634 LR is at ci_hdrc_probe+0x100/0x634 pc : [<c036cc78>] lr : [<c036c9d4>] psr: 60000013 sp : c7837d48 ip : 00000001 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : c791b6c0 r7 : c7945000 r6 : f4424000 r5 : c7945010 r4 : c794e010 r3 : f4424184 r2 : 00000000 r1 : 8c000004 r0 : 0c000004 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: a0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc78361c0) Stack: (0xc7837d48 to 0xc7838000) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-30ARM: dts: imx: Add alias for ethernet controllerMarek Vasut1-0/+1
Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot) patch-in the MAC address for FEC using this alias. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-04-14ARM: dts: imx: add required #clock-cells for fixed-clockShawn Guo1-0/+1
Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-02-24ARM: dts: i.MX27: Add USB nodesAlexander Shiyan1-0/+56
This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX27: Add SSI nodesAlexander Shiyan1-0/+24
This patch adds the missing (Synchronous Serial Interface) SSI1 & SSI2 devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitionsAlexander Shiyan1-0/+2
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: imx27 phyCARD-S pinctrlMarkus Pargmann1-0/+1
Add pinctrl nodes and properties for phyCARD-S device nodes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: imx27 iomux device nodeMarkus Pargmann1-58/+66
This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-18ARM: imx27: add missing #pwm-cells propertySteffen Trumtrar1-0/+1
The pwm-node is missing its #pwm-cells property. The pwm-framework will complain about this. Add the missing property. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx27.dtsi: fix CSPI PER clock idGwenhael Goavec-Merou1-3/+3
CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Disable AUDMUX in the templateAlexander Shiyan1-0/+1
AUDMUX expects additional parameters to be configured correctly, so turn it off into a template. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Remove clock name from CPU nodeAlexander Shiyan1-1/+0
Clock name is not needed for "cpufreq-cpu0". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Increase "clock-latency" valueAlexander Shiyan1-1/+1
i.MX27 CPU can be clocked with a 32 kHz quartz, and not just 32768 Hz, so increase "clock-latency" value, which will ensure that we use two clock cycles on frequency change. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add label to CPU nodeAlexander Shiyan1-1/+1
Add a label to i.MX27 CPU node. This change allows the reuse this node in the upper levels of the DTS. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Remove optional "ptp" clock source for FECAlexander Shiyan1-2/+2
Patch removes optional "ptp" clock source for FEC. This clock is missing in i.MX27. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Using "wdog_ipg_gate" clock source for watchdogAlexander Shiyan1-1/+1
Patch replaces "dummy" clock source for watchdog with "wdog_ipg_gate". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add core voltagesAlexander Shiyan1-3/+4
This patch adds core voltages for i.MX27 CPUs. Only 266 and 400 MHz modes is documented in the datasheet, so we add a 266 MHz frequency for conform this. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add WEIM nodeAlexander Shiyan1-0/+17
This patch adds the missing (Wireless External Interface Module) WEIM devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Move IIM node under AIPI2 busAlexander Shiyan1-7/+7
This patch moves IIM node under AIPI2 bus, since this is proper location for this module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27 cpufreq-cpu0 frequenciesMarkus Pargmann1-0/+18
Set operating-points for imx27. There is no regulator support, so the voltages are 0. The frequencies should be the same for all imx27 boards, so it is defined here and can be overwritten if necessary. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add 1-wireMarkus Pargmann1-0/+7
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add imx framebuffer deviceMarkus Pargmann1-0/+9
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx27: Use 'AITC' for the interrupt controller nameFabio Estevam1-3/+3
On the MX27 Reference Manual the interrupt controller is named AITC: ARM926EJ-S Interrupt Controller So use the AITC term instead of AVIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Origin: id:1334193132-18944-2-git-send-email-festevam@gmail.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add i2c aliasesSascha Hauer1-6/+8
This allows to order the i2c devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add iim nodeSascha Hauer1-0/+7
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add kpp devicetree nodeAlexander Shiyan1-0/+8
This patch adds the missing (Keypad Port) KPP devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Sort entries by addressAlexander Shiyan1-5/+5
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Rename PWM devicetree nodeAlexander Shiyan1-1/+1
i.MX27 have only one PWM, so index from PWM devicetree node removed. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add AUDMUX devicetree nodeAlexander Shiyan1-0/+7
This patch adds the missing (Digital Audio MUX) AUDMUX devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add SAHARA2 devicetree nodeAlexander Shiyan1-0/+8
This patch adds the missing (Symmetric/Asymmetric Hashing and Random Accelerator) SAHARA2 devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx27: Add VPU devicetree nodeAlexander Shiyan1-7/+19
This patch adds the missing VPU devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: i.MX27: Add SDHC devicetree nodesAlexander Shiyan1-0/+33
This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: i.MX27: Add DMA devicetree nodeAlexander Shiyan1-0/+10
This patch adds the missing DMA devicetree node for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: Add aliases for i.MX27 SPI controllerAlexander Shiyan1-0/+3
Add aliases to determine the proper SPI bus number. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx27: Add PWM0 to device treeGwenhael Goavec-Merou1-0/+8
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-24ARM: dts: imx: fix clocks for cspiJonas Andersson1-3/+3
The CSPI controller has only one clock, but the driver spi-imx.c needs clock "per" to calculate bitrate divisor. Signed-off-by: Jonas Andersson <jonas@microbit.se> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: i.MX27: Add clocks to GPT devicetree nodesSascha Hauer1-0/+12
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: i.MX27: Add GPT devicetree nodesSascha Hauer1-1/+36
The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: mx27: Replace clk_register_clkdev with clock DT lookupFabio Estevam1-0/+31
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: imx: use #include for all device treesShawn Guo1-1/+1
Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-17ARM: dts: mx27: Fix the AIPI bus for FECFabio Estevam1-1/+10
FEC controller is connected to AIPI2 bus. Also fix the AIPI1 address range. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16ARM i.MX dts: Consistently add labels to devicenodesSascha Hauer1-2/+3
Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15i2c: imx: remove cpu_is_xxx by using platform_device_idShawn Guo1-2/+2
This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
2012-08-24ARM: dts: imx: Always enable the watchdogFabio Estevam1-1/+0
Instead of enabling the watchdog in each individual dts file, select in the SoC dtsi file instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-07ARM: dts: imx: add alias for gpioShawn Guo1-0/+6
Add alias for gpio nodes, so that gpio driver can identify the port number and then specify a sensible gpio base rather than using the one dynamically allocated by gpio core. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-07ARM: dts: imx: update #interrupt-cells for gpio nodesShawn Guo1-6/+6
Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds1-0/+9
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-05-13ARM: imx: add mxc_nand to imx27 device treeUwe Kleine-König1-0/+9
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.