aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx51.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-04-14ARM: dts: imx: add required #clock-cells for fixed-clockShawn Guo1-0/+4
Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-373/+86
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-03-07ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsiPhilipp Zabel1-1/+21
This patch connects IPU and and parallel display device tree nodes using the OF graph bindings described in Documentation/devicetree/bindings/media/video-interfaces.txt The IPU ports correspond to the two display interfaces. The order of endpoints in the ports is arbitrary. Since the imx-drm node now only needs to contain links to the display interfaces, it can be moved to the SoC dtsi level. At the board level, only connections between the display interface ports and panels have to be added. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-09ARM: dts: imx51: Add mmc aliasesSascha Hauer1-0/+4
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX51: Switch to use standard definitions for input subsystemAlexander Shiyan1-1/+2
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitionsAlexander Shiyan1-0/+1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX51: Move usbphy0 node from AIPS1Alexander Shiyan1-7/+13
usbphy0 is not a part of AIPS1, so move this node under root. Additionally this patch removes useless "status" property. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: imx51: use clock defines in DTS filesLucas Stach1-37/+61
For better readability and no need to look up numbers in the documentation anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX51: Switch to use standard IRQ flags definitionsAlexander Shiyan1-0/+1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX51: Add dummy clock to AUDMUXAlexander Shiyan1-0/+2
This patch adds dummy clock for AUDMUX. This change avoids useless debug message "cannot get clock" during driver initialization. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX51: Update CPU nodeAlexander Shiyan1-6/+6
This patch updates i.MX51 CPU node: - Alias for CPU is added to allow using this node in the parent DTS files. - Removed useless "clock_names" property. - "clock-latency" value increased to safe using with 32 kHz OSC. - Defined operating points voltages and "voltage tolerance" properties. Values are safe for both commercial and industrial CPU variants. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: imx51: make pinctrl nodes board specificShawn Guo1-326/+0
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-11ARM: dts: i.MX51: Fix OTG PHY clockAlexander Shiyan1-1/+1
Proper clock ID for USB OTG PHY is "usb_phy_gate". The patch changes this mismatch. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26ARM: dts: i.MX51: Add W1 devicetree nodeAlexander Shiyan1-0/+8
This patch adds the missing W1 (onewire) devicetree node for i.MX51 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26ARM: dts: i.MX51: Add IRAM devicetree nodeAlexander Shiyan1-0/+5
This patch adds the missing IRAM devicetree node for i.MX51 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26ARM: dts: i.MX51: Separate TXD/RXD and RTS/CTS pinmux entries for UARTsAlexander Shiyan1-0/+10
RTS/CTS pins can be used for different purposes, so create separate definitions for these pins. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx51.dtsi: fix PATA device clockArnaud Patard (Rtp)1-1/+1
Commit 718a350 (ARM: i.MX51: Add PATA support) adds pata support to the imx51.dtsi file and is using clock 161. The problem is that the right clock is 172, according to commit 5d530bb (ARM: i.MX5: Add PATA and SRTC clocks). Using the clock 172 makes things work again (and kills a nasty system freeze). Tested-by: Steev Klimaszewski <steev@gentoo.org> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add one more I2C2 pinmux entryAlexander Shiyan1-0/+7
This adds one more I2C2 alternate pinmux entry. GPIO1_2 <=> SCL GPIO1_3 <=> SDA Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Move pins configuration under "iomuxc" labelAlexander Shiyan1-307/+309
This unmix module/pin definitions and reduce indentation for pin groups, so makes template a bit cleaner. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 templateAlexander Shiyan1-1/+1
External high frequency clock CKIH1 is optional for i.MX51, so move it setup into boards where it is used. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: use generic DMA bindings for SSI nodesShawn Guo1-0/+9
Updates SSI nodes to adopt generic DMA bindings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add WEIM nodeAlexander Shiyan1-0/+17
This patch adds the missing (Wireless External Interface Module) WEIM devicetree node for i.MX51 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: add #dma-cells property for sdmaHuang Shijie1-0/+1
Add the #dma-cells property for all the sdma in all the imx platforms. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add USB host1/2 pinmux entriesSascha Hauer1-0/+38
This adds pinmux entries for USBH1/2 in ULPI mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: move kpp pinmux entrySascha Hauer1-15/+15
For keeping the alphabetical order in the pinmux nodes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add i2c and spi aliasesSascha Hauer1-3/+8
This allows to order the i2c and spi devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add iim nodeSascha Hauer1-0/+7
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: use usb-nop-xceiv usbphy entries for imx5xMichael Grzeschik1-0/+8
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: add imx5x usb clock DT lookupsMichael Grzeschik1-0/+5
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: add imx5x usbmisc entriesMichael Grzeschik1-0/+10
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-24ARM: dts: imx: fix clocks for cspiJonas Andersson1-1/+1
The CSPI controller has only one clock, but the driver spi-imx.c needs clock "per" to calculate bitrate divisor. Signed-off-by: Jonas Andersson <jonas@microbit.se> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: dts: imx51 cpu nodeMarkus Pargmann1-0/+18
This patch adds a cpus/cpu@0 node for imx51 with default operating points for the cpufreq-cpu0 driver. There is currently no regulator support, so the voltages are 0 here. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: i.MX51: Add PATA supportSascha Hauer1-0/+44
This adds the PATA device and the pinctrl group for to the i.MX51 dts. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device treePhilipp Zabel1-0/+7
Also, link SRC to IPU via phandle. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM i.MX5: Move IPU clock lookups into device treePhilipp Zabel1-0/+2
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: i.MX51: Add GPT devicetree nodeSascha Hauer1-0/+8
The GPT is the GPT timer found on i.MX SoCs. This patch adds the devicetree node for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: imx51: Add a second pinctrl group for i2c2Gwenhael Goavec-Merou1-0/+7
Add a second pinctrl group of pins for i2c2. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: imx51: Add pinctrl for ecspi2Gwenhael Goavec-Merou1-0/+10
Add ecspi2 group of pins for imx51. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09pinctrl: imx: move hard-coding data into device treeShawn Guo1-122/+123
Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09ARM: imx: use #include for all device treesShawn Guo1-1/+1
Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10ARM: dts: Add apf51 basic supportLaurent Cans1-0/+30
Signed-off-by: Laurent Cans <laurent.cans@gmail.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10ARM: dts: imx: Add imx51 KPP entryLiu Ying1-0/+23
1) Add KPP device node entry. 2) Add one KPP pinctrl entry. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-13Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-20/+23
Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
2012-11-22ARM i.MX51: Add pwm supportSascha Hauer1-0/+18
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22ARM: mx5: Replace clk_register_clkdev with clock DT lookupFabio Estevam1-0/+39
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16ARM i.MX51: Add IPU supportSascha Hauer1-0/+67
This adds the IPU device to the devicetree along with the necessary pinctrl settings for the parallel display outputs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM i.MX dts: Consistently add labels to devicenodesSascha Hauer1-20/+20
Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM i.MX dtsi: Add default bus-width property for esdhc controllerSascha Hauer1-0/+3
According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15i2c: imx: remove cpu_is_xxx by using platform_device_idShawn Guo1-2/+2
This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
2012-10-09Merge tag 'disintegrate-mtd-20121009' of git://git.infradead.org/users/dhowells/linux-headersDavid Woodhouse1-1/+145
UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.