aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-10ARM: dts: imx6qdl: Fix memory node duplicationMarco Franchi1-0/+1
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Add memory node unit nameMarco Franchi1-1/+1
Fix the following warnings from dtc by adding the unit name to memory nodes: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Converted using the following command: perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"` The files below were manually fixed: -imx1-ads.dts -imx1-apf9328.dts -imx6q-pistachio.dts Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-1/+1
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-07ARM: dts: imx6: Fix PCI GPIO reset polarityFabio Estevam1-1/+1
The imx6 PCI driver ignores the GPIO polarity from 'reset-gpio' and considers that the PCI reset is active low, unless the property 'reset-gpio-active-high' is present. Fix the device tree description by explicitly passing the 'GPIO_ACTIVE_LOW' flag to the 'reset-gpio' property. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-05ARM: dts: imx: Fix Ethernet PHY reset polarityFabio Estevam1-1/+1
The FEC driver ignores the GPIO polarity from 'phy-reset-gpios' and considers that the Ethernet PHY is active low, unless the property 'phy-reset-active-high' is present. Fix the device tree description by explicitly passing the 'GPIO_ACTIVE_LOW' flag to the 'phy-reset-gpios' property. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: imx: remove obsoleted property fsl,spi-num-chipselectsVladimir Zapolskiy1-1/+0
Since commit b36581df7e78 ("spi: imx: Using existing properties for chipselects") the device tree property 'fsl,spi-num-chipselects' is unused and it is already marked as obsolete in device tree binding documentation. Remove the property from the existing DTS files to avoid its reoccurence on copying. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-09ARM: dts: imx6qdl: don't configure reserved pad settingsUwe Kleine-König1-12/+12
Several dts files set a bit in the SPEED field for pads RGMII_{R,T}{XC,D0,D1,D2,D3,X_CTL}, but that doesn't exist. Writing there doesn't have an effect and the bit reads as zero. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-22ARM: dts: fix STMicroelectronics compatible stringsStefan Agner1-1/+1
Replace the non-standard vendor prefix stm with st for STMicroelectronics. The drivers do not specify the vendor prefixes since the I2C Core strips them away from the DT provided compatible string. Therefore, changing existing device trees does not have any impact on device detection. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org>
2015-10-19ARM: dts: imx: add "jedec,spi-nor" flash compatible bindingRafał Miłecki1-1/+1
Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification. Use it for all flashes that are supposed to support READ ID op according to the datasheets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2014-08-18ARM: dts: imx6: edmqmx6: change enet reset pinSilvio Fricke1-1/+2
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add can busSilvio Fricke1-0/+13
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add two other i2c busesSilvio Fricke1-0/+28
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add PCIe supportSilvio Fricke1-0/+13
Add support for the PCI express bus available on MX6 Data Modul edm-qmx6 board. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpeSilvio Fricke1-0/+4
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx6: edmqmx6: add SPI bus and flashLucas Stach1-0/+23
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpioLucas Stach1-1/+8
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: Add stdout-path property to i.MX boardsSascha Hauer1-0/+4
This adds the stdout-path property to various i.MX boards. Values of the property have been taken from barebox, so they should be correct. Also, the older linux,stdout-path property is converted to stdout-path. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: edmqmx6: add second STMPELucas Stach1-9/+29
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: edmqmx6: USB H1 only supports host modeLucas Stach1-0/+1
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulatorSascha Hauer1-3/+4
GPIO7_12 switches the D+/D- USB lines on and off. When we use this as VBUS regulator it means that USB device mode can never work as VBUS is never turned on in Device mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: edmqmx6: Fix usbotg id pinLucas Stach1-1/+1
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-02-09ARM: dts: imx6: Add support for imx6q dmo edmqmx6Silvio F1-0/+372
Signed-off-by: Silvio F <silvio.fricke@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.