aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6qdl-icore.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-10ARM: dts: imx6qdl: Fix memory node duplicationMarco Franchi1-0/+1
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-05ARM: dts: imx6qdl-icore: Add missing stdout-path propertyShyam Saini1-0/+4
This would help us to get early boot logs by passing "earlycon" to kernel bootargs. Further, by adding this we don't have to depend on complex earlyprintk configs for early boot logs. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: i.MX6: Use consistent node names for Engicam filesJagan Teki1-2/+2
Use consistent pinctrl node names for Engicam dt files, sufix 'grp' look consistent than actual node name - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx: Switch Engicam boards to use SPDX identifierJagan Teki1-37/+1
Adopt the SPDX license identifier headers to ease license compliance management. Also added Engicam Copyright on missing files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-19ARM: dts: imx6qdl-icore: Fix wrong reg_2p5 regulator node nameJagan Teki1-2/+1
- in reg_2p5, fix regulator node name as regulator-2p5v - remove exctra line Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-19ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensorJagan Teki1-1/+45
OV5640 Camera sensor is connected in i.CoreM6 1.5 Quad/Dual MIPI starter kit. This patch also move MX6QDL_PAD_GPIO_0__CCM_CLKO1 pinctrl from i2c3 to ov5640 pinctrl. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-18ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit supportJagan Teki1-0/+23
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application. notable features: CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz Memory Up to 2 GB DDR3-1066 Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4 port 8 bit CSI INPUT MIPI-CSI INPUT 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-18ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simpleJagan Teki1-1/+1
Switch to use koe_tx31d200vm0baa LVDS timings from panel-simple instead hard coding the same in dts. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Add memory node unit nameMarco Franchi1-1/+1
Fix the following warnings from dtc by adding the unit name to memory nodes: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Converted using the following command: perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"` The files below were manually fixed: -imx1-ads.dts -imx1-apf9328.dts -imx6q-pistachio.dts Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-icore-rqs: Switch to use simple-audio-cardJagan Teki1-2/+2
This patch replace fsl,imx-audio-sgtl5000 and use simple-audio-card for Engicam i.CoreM6 RQS QDL platform boards. This patch also fix, pinctrl_adumux. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6qdl-icore: Add Sound card supportJagan Teki1-0/+97
Linux Sound card now uses generic simple-audio-card, so add the same along with related audmux and codec(via u2c3) for i.CoreM6 QDL module boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx6qdl-icore: Add backlight support for lvdsJagan Teki1-0/+19
This patch add support for lvds backlight on i.CoreM6 QDL variant boards. Cc: Domenico Acri <domenico.acri@engicam.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10ARM: dts: imx/vf: Correct license textAlexandre Belloni1-5/+5
The license text has been mangled at some point then copy pasted across multiple files. Restore it to what it should be. Note that this is not intended as a license change. Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-01ARM: dts: imx6qdl-icore: Add FEC supportJagan Teki1-0/+31
Add FEC support for Engicam i.CoreM6 dql modules. Observed similar 'eth0: link is not ready' issue which was discussed in [1] due rmii mode with external ref_clk, so added clock node along with the properties mentioned by Shawn in [2] FEC link log: ------------ $ ifconfig eth0 up [ 27.905187] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ 27.918982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [1] https://patchwork.kernel.org/patch/3491061/ [2] https://patchwork.kernel.org/patch/3490511/ Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-01ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial supportJagan Teki1-0/+234
i.CoreM6 Quad/Dual modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DQ, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.