aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/keystone-k2e.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-07-30ARM: dts: keystone-k2e: Add DSP nodeSuman Anna1-0/+20
The Keystone 2 66AK2E SoC has one TMS320C66x DSP Core Subsystem (C66x CorePac), with a 1.4 GHz C66x Fixed or Floating-Point DSP Core, and 32 KB of L1P & L1D SRAMs and a 1 MB L2 SRAM. Add the DT node for this DSP processor sub-system. The processor does not have a MMU, and uses various IPC Generation registers and shared memory for inter-processor communication. The alias with a stem 'rproc' has also been added for the DSP, it provides a fixed remoteproc id for the DSP processor. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Sam Nelson <sam.nelson@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-19ARM: dts: keystone-k2e: Add PSC reset controller nodeSuman Anna1-0/+13
The Power Sleep Controller (PSC) module contains specific memory-mapped registers that can be used to perform reset management using specific bits for the DSPs available on the SoC. The PSC is defined using a syscon node, and the reset functionality is defined using a child syscon reset controller node. Add this syscon reset controller node as well as the reset control data for the resets it supports for the 66AK2E SoCs. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-07ARM: dts: keystone-k2e: Reserve MSM RAM for boot monitorSuman Anna1-0/+4
The Keystone 2 boot monitor uses 32 KB of the MSM RAM @ 0x0c1f0000 on 66AK2E SoCs, so add a reserved child node for the same. This address is aligned to the values used within the latest boot monitor firmware [1] as of commit cf8b431e8b3b ("soc: Move load address to end of MSMC"). [1] git://git.ti.com/processor-firmware/ks2-boot-monitor.git Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-07ARM: dts: keystone-k2e: Add MSM RAM nodeSuman Anna1-0/+8
Add the RAM managed by the Multicire Shared Memory Controller (MSMC) as a mmio-sram node. The 66AK2E SoCs have 2 MB of such memory. Any specific MSM memory range needed by a software module ought to be reserved using an appropriate child node. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-08-31ARM: dts: keystone: specify usb mode explicitlyGrygorii Strashko1-2/+2
The USB OTG mode is not supported by Kestone 2 devices, as result, the USB devices enumeration and detection will not work properly when kernel is built with CONFIG_USB_DWC3_DUAL_ROLE=y (default for multi platform build): - it's required to load gadget drivers manually to make host mode work and this confuses current Keystone 2 users - device mode is not working, because port can't detect and switch to peripheral/host mode dynamically. Hence, specify usb mode explicitly in DT: usb0 = "host" for all KS2 devices and usb1 = "peripheral" for K2E. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-06-08ARM: dts: keystone: add interrupt property to PCI controller bindingsMurali Karicheri1-0/+2
Now that Keystone PCIe controller supports error interrupt handling add interrupt property to PCI controller DT bindings to enable error interrupt handling. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-06-08ARM: dts: keystone: remove bogus IO resource entry from PCI bindingMurali Karicheri1-2/+3
The PCI DT bindings contain a bogus entry for IO space which is not supported on Keystone. The current bogus entry has an invalid size and throws following error during boot. [0.420713] keystone-pcie 21021000.pcie: error -22: failed to map resource [io 0x0000-0x400000003fff] So remove it from the dts. While at it also add a bus-range value that eliminates following log at boot up. [0.420659] No bus range found for /soc/pcie@21020000, using [bus 00-ff] Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-04-13ARM: dts: k2*: Rename the k2* files to keystone-k2* filesNishanth Menon1-0/+150
As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and MAINTAINERS files): for i in arch/arm/boot/dts/k2* do b=`basename $i`; git mv $i arch/arm/boot/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/boot/dts/*[si] done NOTE: bootloaders that depend on older dtb names will need to be updated as well. [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>