linux-dev - Linux kernel development work

Age	Commit message (Collapse)	Author	Files	Lines
2013-03-08	ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency	Jason Cooper	1	-1/+0
	When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-07-27	ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi	Jamie Lentin	1	-41/+1
	A lot of device setup is shared between DNS-320 and DNS-325, move the definitions into a common include. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27	ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings	Jamie Lentin	1	-0/+25
	Replace code in board-dnskw with the equivalent devicetree bindings. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27	ARM: Kirkwood: Describe DNS325 temperature sensor in DT.	Andrew Lunn	1	-0/+8
	Now that we have I2C support in DT, describe the LM75 in the DT file for the DNS325. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
2012-07-27	ARM: Kirkwood: Use DT to configure SATA device.	Andrew Lunn	1	-0/+5
	Convert boards using DT, but the old way of configuring SATA to now use properties in there DT file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-25	ARM: Kirkwood: Replace mrvl with marvell	Andrew Lunn	1	-1/+1
	It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-15	ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt	Jamie Lentin	1	-0/+35
	Use devicetree to define NAND partitions. Use D-link partition scheme by default, to be vaguely compatible with their userland. Changes since last submission (V4):- * Don't add NAND support then throw it away immediately after [Grant Likely] Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15	ARM: kirkwood: Basic support for DNS-320 and DNS-325	Jamie Lentin	1	-0/+24
	Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>