aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap3-cm-t3x.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-08-31ARM: dts: omap3: Add missing unit name to memory nodesJavier Martinez Canillas1-1/+1
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29ARM: dts: cm-t3x: remove unneeded unit name in connectorJavier Martinez Canillas1-1/+1
This patch fixes the following DTC warnings for omap3-cm-t3517.dtb, omap3-cm-t3530.dtb and omap3-cm-t3730.dtb: "connector@1 has a unit name, but no reg property" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: omap3: Fix NAND device nodesRoger Quadros1-1/+5
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: dts: omap: replace legacy *,wakeup property with wakeup-sourceSudeep Holla1-1/+1
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-12ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boardsJavier Martinez Canillas1-1/+1
Many OMAP2+ DTS are not using the defined constants to express the GPIO polarity. Replace these so the DTS are easier to read. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-13ARM: dts: cm-t3x: add NAND supportDmitry Lifshitz1-0/+58
CM-T3517, CM-T3530 and CM-T3730 features NAND storage chip connected to GPMC bus. Add GPMC DT entry into the root DT file omap3-cm-t3x.dtsi, common for all three modules. NAND timings are calculated to be safe for CM-T3x devices as it works now in non DT boot (in this case the timings are updated by U-Boot). Update GPMC ranges in boards DT files to include all connected devices. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24ARM: dts: sbc-t3x30: add audio supportDmitry Lifshitz1-0/+16
Add audio related DT nodes Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24ARM: dts: cm-t3x: add TV out supportDmitry Lifshitz1-0/+22
Add TV out support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24ARM: dts: cm-t3x: add I2C1 pinmuxDmitry Lifshitz1-0/+10
Add missing I2C1 pinmux setup. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-21ARM: dts: cm-t3x: add EEPROM supportDmitry Lifshitz1-0/+7
Add at24 EEPROM chip support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> [tony@atomide.com: updated to remove missing i2c1_pins] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-21ARM: dts: cm-t3x: add ADS7846 touchscreen supportDmitry Lifshitz1-0/+57
Add ADS7846 touchscreen support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-21ARM: dts: cm-t3x: cleanup comments indentationDmitry Lifshitz1-6/+6
Fix comment style Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: sbc-t3x: add DVI display dataDmitry Lifshitz1-0/+39
Add DSS related pinmux and display data nodes required to support DVI video out on SBC-T3530, SBC-T3730 and SBC-T3517. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: cm-t3x30: add HS USB Host supportDmitry Lifshitz1-0/+38
Add HS USB Host support along with USB PHYs and power supply regulators Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: cm-t3x: add gpio-led pinmuxDmitry Lifshitz1-0/+8
GPIO186 is used for the heartbeat led. Setup the pinmux for the GPIO186. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: sbc-t3x: disable mmc3Dmitry Lifshitz1-0/+4
Disable mmc3 interface, since is not used on sbc-t3x boards. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: sbc-t3x: refactor DT supportDmitry Lifshitz1-0/+60
Refactor the sbc-t3x device tree as a preparation for additional (sbc-t3530, sbc-t3517, etc.) boards support. No functional changes. The device tree will have the following structure: omap3-cm-t3x.dtsi | |<-- omap3-cm-t3x30.dtsi | | | | | | ----- ------- ------------ | | | CoM | | Board | | Base board | | | ----- ------- ------------ | | omap3-sb-t35.dtsi | | | | |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->| | | | | |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->| | | |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->| Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.