aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a73a4-ape6evm.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-06-14ARM: dts: ape6evm: Name mmc pfc subnode after device nameGeert Uytterhoeven1-1/+1
Name the Pin Function Controller subnode for MMC0 after its device name, instead of using the generic and indexless "mmc". This avoids conflicts when enabling support for more MMC interfaces later, either here or in a DT overlay. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14ARM: dts: ape6evm: Name serial port pfc subnode after device nameGeert Uytterhoeven1-1/+1
Name the Pin Function Controller subnode for SCIFA0 after its device name, instead of after the serial port alias. This avoids conflicts when enabling support for more serial ports later, either here or in a DT overlay. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30ARM: dts: ape6evm: Fix W=1 dtc warningsGeert Uytterhoeven1-4/+4
Warning (unit_address_vs_reg): Node /regulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@3 has a unit name, but no reg property Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28ARM: dts: ape6evm: use generic pinctrl propertiesSimon Horman1-10/+10
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the ape6evm device tree to use the generic properties. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-10ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-pathGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-23ARM: dts: shmobile/r8a7xxx: replace gpio-key, wakeup with wakeup-source propertySudeep Holla1-1/+1
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: ape6evm dts: Use generic names for device nodesGeert Uytterhoeven1-1/+1
max8973 -> regulator Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-22Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-21/+16
Pull ARM SoC multiplatform code changes from Olof Johansson: "The changes here belong to two main platforms: - Atmel At91 is flipping the bit and going multiplatform. This includes some cleanups and removal of code, and the final flip of config dependencies - Shmobile has several platforms that are going multiplatform, but this branch also contains a bunch of cleanups that they weren't able to keep separate in a good way. THere's also a removal of one of their SoCs and the corresponding boards (sh7372 and mackerel)" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) ARM: at91/pm: move AT91_MEMCTRL_* to pm.h ARM: at91/pm: move the standby functions to pm.c ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected ARM: at91: add a Kconfig dependency on multi-platform ARM: at91: drop AT91_TIMER_HZ ARM: at91: remove hardware.h ARM: at91: remove SoC headers ARM: at91: remove useless mach/cpu.h ARM: at91: remove unused headers ARM: at91: switch at91_dt_defconfig to multiplatform ARM: at91: switch to multiplatform ARM: shmobile: r8a7778: enable multiplatform target ARM: shmobile: bockw: add sound to DT ARM: shmobile: r8a7778: add sound to DT ARM: shmobile: bockw: add devices hooked up to i2c0 to DT DT: i2c: add trivial binding for OKI ML86V7667 video decoder ARM: shmobile: r8a7778: common clock framework CPG driver ARM: shmobile: bockw dts: set extal clock frequency ARM: shmobile: bockw dts: Move Ethernet node to BSC ARM: shmobile: r8a73a4: Remove legacy code ...
2015-03-07ARM: shmobile: ape6evm dts: Configure the custom switch as wake-up sourceGeert Uytterhoeven1-0/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-07ARM: shmobile: ape6evm dts: Enable pull-up for GPIO switchesGeert Uytterhoeven1-0/+9
The switches on r8a73a4/ape6evm do not have pull-up registers. The schematics say: "Need to use APE6 internal PullUp", hence enable pull-up using pinctrl. Without this, the switches don't really work, as the GPIO inputs are more likely to pick up ghost signals through capacitive coupling than actual keypresses. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27ARM: shmobile: ape6evm dts: Fix polarity of LEDsGeert Uytterhoeven1-6/+6
While the LEDs on r8a73a4/ape6evm are tied to VSUPPLY, they're driven by an N-channel MOSFET. Hence the GPIO signal should be active high. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: ape6evm dts: Drop console= bootargs parameterGeert Uytterhoeven1-1/+1
Since ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"), ape6evm is restricted to booting from DT, so chosen/stdout-path is always used, and we can drop the "console=" parameter from chosen/bootargs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: ape6evm dts: Move Ethernet node to BSCGeert Uytterhoeven1-20/+15
Move the Ethernet node from the ad-hoc lbsc node to the BSC node, as its connected to the Bus State Controller. This allows the system to know the right position of the Ethernet node in the clock and PM domain hierarchy, and manage the clock and PM domain appropriately. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21ARM: shmobile: ape6evm: Fix LAN9220 VDDVARIO voltageLaurent Pinchart1-3/+11
The LAN9220 VDDVARIO supply is powered by a 1.8V source, not 3.3V. Fix it in the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21ARM: shmobile: ape6evm: Add keypad to the device treeUlrich Hecht1-0/+41
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21ARM: shmobile: ape6evm: Add LEDs to the device treeUlrich Hecht1-0/+28
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21ARM: shmobile: ape6evm: synchronize dts with reference platformUlrich Hecht1-2/+90
This moves everything to the legacy dts that is missing there in preparation for the switch to multiplatform. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21ARM: shmobile: ape6evm: fix compatible string for Ethernet controllerUlrich Hecht1-1/+1
It's a 9220, not a 9118. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Include all 2 GiB of memory on APE6EVMTakashi Yoshii1-0/+5
Add 1GiB of DRAM at 0x2_0000_0000 to support the full 2GiB of APE6EVM system memory. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in board DT filesLaurent Pinchart1-1/+2
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use #include in device tree sourcesLaurent Pinchart1-1/+1
In order to allow usage of the preprocessor in the SoC device tree sources, switch from /include/ to #include. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boardsGuennadi Liakhovetski1-0/+1
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-05ARM: shmobile: Mount root file systems in r/w mode for all DT platformsLaurent Pinchart1-1/+1
The shmobile DT files available in the kernel are reference implementations intended to be used as sample code, as well as for development. As such, it makes sense to mount the root file system in read/write mode by default. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: ape6evm: add CPUFreq supportGuennadi Liakhovetski1-0/+22
This patch adds OPPs to the CA15 DT node and a max8973 DT node to support clock and voltage scaling, using the cpufreq-cpu0 CPUFreq driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03ARM: shmobile: APE6EVM LAN9220 supportMagnus Damm1-1/+22
Add LAN9220 support to the APE6EVM board using C and DT. At this point the PFC driver lacks DT bindings so to configure the PFC we use PINCTRL in C board code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03ARM: shmobile: APE6EVM base supportMagnus Damm1-0/+31
V3 of APE6EVM base board support making use of 1 GiB of memory, the SCIFA0 serial port and ARM architected timer. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.