aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7778.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-08-27ARM: dts: Include R-Car Gen1 product name in DTSI filesMagnus Damm1-1/+1
Browsing the DTS for all the R-Car SoCs with similar part numbers still makes my head hurt, so to improve the user friendliness of the 32-bit ARM DTS code base include R-Car Gen1 product names for each DTSI file. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-23ARM: dts: convert to SPDX identifier for Renesas boardsWolfram Sang1-4/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: r8a7778: Use R-Car SDHI Gen1 fallback compat stringSimon Horman1-3/+6
Use newly added R-Car SDHI Gen1 fallback compat string in the DT of the r8a7778 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: r8a7778: Use R-Car Gen1 Ether fallback compat stringSimon Horman1-1/+2
Use newly added R-Car Gen1 Ether fallback compat string in the DT of the r8a7778 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7778: Add clock for CA9 CPU coreGeert Uytterhoeven1-0/+1
Improve hardware description by adding a clock property to the device node corresponding to the CA9 CPU core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7778: Use R-Car GPIO Gen1 fallback compat stringSimon Horman1-5/+5
Use newly added R-Car GPIO Gen1 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in DT of r8a7778 SoC. As the driver does not match on "renesas,gpio-r8a7778" there are some run-time considerations for this patch: * When a resulting DTB is used with kernels newer than v4.14 this should not have any run-time effect as renesas,rcar-gen1-gpio is matched by the driver since commit dbd1dad2ab8f ("gpio: rcar: add gen[123] fallback compatibility strings") * However, when used with older kernels GPIO will be disabled as no compat string match will be made by the driver. The regression documented above for the new DTB with old kernel case is acceptable in my opinion. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15ARM: dts: r8a7778: update PFC node name to pin-controllerSimon Horman1-1/+1
The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from fffc0000.pfc and pfc@fffc0000 to fffc0000.pin-controller and pin-controller@fffc0000. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-01-03ARM: dts: r8a7778: Use R-Car Gen 1 fallback binding for i2c nodesSimon Horman1-4/+4
Use recently added R-Car Gen 1 fallback binding for i2c nodes in DT for r8a7778 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7778 and the fallback binding for R-Car Gen 1. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-01-03ARM: dts: r8a7778: Use SoC-specific compat string for mmcifSimon Horman1-1/+1
Use the SoC-specific compat string for mmcif in DT for the r8a7778 SoC. This is in keeping with the use of compat strings for mmcif for other Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-12-15Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-2/+2
Pull ARM DT updates from Arnd Bergmann: "Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits) arm: dts: zynq: Add MicroZed board support ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: artpec: add pcie support ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name ARM: dts: Add xo to sdhc clock node on qcom platforms ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ...
2016-11-04ARM: dts: r8a7778: Remove skeleton.dtsi inclusionGeert Uytterhoeven1-2/+2
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-02ARM: dts: r8a7778: Add device node for RESET/WDT moduleGeert Uytterhoeven1-0/+5
Add a device node for the RESET/WDT module, which provides a.o. reset control, mode pin monitoring, and watchdog control. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2016-05-30ARM: dts: r8a7778: Fix W=1 dtc warningsGeert Uytterhoeven1-14/+14
Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,src/src@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,src/src@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,src/src@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,src/src@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,src/src@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,src/src@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,src/src@9 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,ssi/ssi@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,ssi/ssi@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,ssi/ssi@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,ssi/ssi@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,ssi/ssi@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,ssi/ssi@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ffd90000/rcar_sound,ssi/ssi@9 has a unit name, but no reg property Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27ARM: dts: r8a7778: Don't disable referenced optional clocksGeert Uytterhoeven1-1/+0
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28ARM: dts: r8a7778: Remove unnecessary clock-output-names propertiesSimon Horman1-15/+6
* Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-09ARM: dts: r8a7778: Add BRG support for SCIFGeert Uytterhoeven1-12/+27
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (S1 and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF device nodes. This increases the range and accuracy of supported baud rates on SCIF. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-09ARM: dts: r8a7778: Rename the serial port clock to fckLaurent Pinchart1-6/+6
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-09ARM: dts: r8a7778: Add SCIF fallback compatibility stringsGeert Uytterhoeven1-6/+12
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-29ARM: dts: r8a7778: use GIC_* definesSimon Horman1-43/+44
Use GIC_* defines for GIC interrupt cells in r8a7778 device tree. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-20Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+6
Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...
2015-12-14ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GICGeert Uytterhoeven1-1/+1
Replace the "arm,cortex-a9-gic" compatible value for the GIC by "arm,pl390", as the documentation states it is a PL390. This has been confirmed by reading the GICD_IIDR register, which reports 0x0000043b (PL390 = 0x00, ARM = 0x43b). This has no effect on runtime behavior, as currently the GIC driver treats both compatible values the same. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-08ARM: shmobile: r8a7778: tidyup #sound-dai-cells settingsKuninori Morimoto1-1/+6
Renesas sound driver needs #sound-dai-cells settings, but, this usage is a little bit confusable. It came from ALSA SoC historical reasons. The sound DAI naming method is different between Single/Multi DAI in the ALSA framework, and it is used for sound card matching. And this #sound-dai-cells has relationship to it. Current SoC dtsi has #sound-dai-cells = <1> as default settings (= it is assuming that board/platform has multi DAI), and board/platform side needs to overwrite it if board/platform was single DAI. This style is more confusable for users. This patch removes SoC side default settings, and force to set it by board/platform side. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-14ARM: shmobile: r8a7778: tidyup SSI resource regionKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12ARM: shmobile: r8a7778 dtsi: Add CPG/MSTP Clock DomainGeert Uytterhoeven1-0/+22
Add an appropriate "#power-domain-cells" property to the cpg_clocks device node, to create the CPG/MSTP Clock Domain. Add "power-domains" properties to all device nodes for devices that are part of the CPG/MSTP Clock Domain and can be power-managed through an MSTP clock. This applies to most on-SoC devices, which have a one-to-one mapping from SoC device to DT device node. A notable exception is the "sound" node, which represents multiple SoC devices, each having their own MSTP clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7778 dtsi: Use generic names for device nodesGeert Uytterhoeven1-1/+1
irqpin -> interrupt-controller Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01ARM: shmobile: r8a7778: add sound to DTUlrich Hecht1-0/+55
Adds an entry for an R-Car Gen. 1 sound controller. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> [horms: Removed undocumented "renesas,rcar_sound" compat string] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a7778 dtsi: Add Bus State Controller nodeUlrich Hecht1-0/+7
Add a node for the Bus State Controller (BSC) on r8a7778, to which multiple external devices can be connected. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a7778: add internal ethernet controller to DTUlrich Hecht1-0/+11
Internal Ethernet controller DT entry with clock information. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a7778: add MSTP clock assignments to DTUlrich Hecht1-0/+29
Assigns clocks to i2c*, tmu*, scif*, mmcif, sdhi*, and hspi*. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a7778: Common clock framework DT descriptionUlrich Hecht1-0/+191
Declares all r8a7778 clocks supported by the legacy clock framework, plus tmu2. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: only included dtsi changes] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19Merge tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dtArnd Bergmann1-6/+0
Pull "Second Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman: * Drop console= bootargs parameter on alt * Correct scifb* naming on r8a73a4 * Drop 0x unit-address prefixes * Remove unnecessary MMC options * tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: alt dts: Drop console= bootargs parameter ARM: shmobile: r8a73a4: fix scifb* naming ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-30ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC optionsKuninori Morimoto1-6/+0
As of commit b3a5d4ce65162d27 ("mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7778), the driver takes care of r8a7778 specific MMC options. Hence they can be removed from the dtsi. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [geert: Rebased, reworded, added reference] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: r8a7778: Add SoC-specific TMU compatible propertyGeert Uytterhoeven1-3/+3
The TMU timers used the generic compatible property only. Add the SoC-specific one, to make it future proof. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: r8a7778: Add TMU nodesSimon Horman1-0/+36
This describes all of the TMU hardware of the r8a7778. Each node is disabled and may be enabled as necessary by board DTS files. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-22ARM: shmobile: r8a7778: Update DTS to include CPU frequencyMagnus Damm1-0/+6
Add CPU Frequency information to the r8a7778 DTS file. This will allow us to use the shared C code on r8a7778 and BockW which reads out the clock frequency from DT and calculates the delay settings from there. Also add other missing CPU information to the r8a7778 DTS. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-12ARM: shmobile: r8a7778: Add SCIF nodesSimon Horman1-0/+42
This describes all of the SCIF hardware of the r8a7778. Each node is disabled and may be enabled as necessary by board DTS files. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-13ARM: shmobile: dts: Move interrupt-parent property to root nodeLaurent Pinchart1-17/+1
There's no need to duplicate the interrupt-parent property in all DT nodes as the kernel automatically walks parent nodes to find the property. Specify it once in the root node only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: r8a7778 dtsi: Improve and correct HSPI nodesGeert Uytterhoeven1-6/+12
- Add "renesas,hspi-r8a7778" compatible value, - Correct reference to parent interrupt controller (use "interrupt-parent" instead of "interrupt-controller"), - Add missing "#address-cells" and "#size-cells" properties, which are needed when populating the SPI buses. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-13ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodesGeert Uytterhoeven1-40/+0
"ARM: shmobile: r8a7778: add I2C support on DTSI" was applied twice: commit ae4273ec7b25c8b9c895a4aae31f2fced980b7bf commit 3acb51b9215bd99da403ecf8200f8425176b1926 Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7778 suffix for INTC compat stringMagnus Damm1-1/+1
Add "renesas,intc-irqpin-r8a7778" to the compatible string for the IRQ pins in case of r8a7778 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT filesLaurent Pinchart1-3/+3
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in SoC DT filesLaurent Pinchart1-21/+23
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: add HSPI suppport on DTSIKuninori Morimoto1-0/+30
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: add I2C support on DTSIKuninori Morimoto1-0/+40
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: tidyup DT node namingKuninori Morimoto1-4/+4
According to ePAPR spec, this patch tidies up DT node name and related clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: add SDHI support on DTSIKuninori Morimoto1-0/+30
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: add MMCIF support on DTSIKuninori Morimoto1-0/+8
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: Fix pin control device address in DTLaurent Pinchart1-1/+1
The PFC device is erroneously declared at address 0xfffc000 instead of 0xfffc0000. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: add I2C support on DTSIKuninori Morimoto1-0/+40
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-14Merge tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dtKevin Hilman1-1/+0
From Tony Lindgren: Changes needed to prepare for making omap3 device tree only: - Always build in board-generic, and add pdata quirks and auxdata support for it so we have all the pdata related quirks in the same place. - Merge of the drivers/pinctrl changes that are needed for PM to continue working on omap3 and also needed for other omaps eventually. The three pinctrl related patches have been acked by Linus Walleij and are pulled into both the pinctrl tree and this branch. - Few defconfig related changes for drivers needed. * tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits) ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it ARM: OMAP2+: Add minimal 8250 support for GPMC ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3 ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap ARM: OMAP2+: Add support for auxdata pinctrl: single: Add support for auxdata pinctrl: single: Add support for wake-up interrupts pinctrl: single: Prepare for supporting SoC specific features ARM: OMAP2+: igep0020: use display init from dss-common ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.