aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7793-gose.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-12ARM: dts: gose: add composite video inputUlrich Hecht1-0/+59
Adds VIN, decoder and connector. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-26ARM: dts: gose: add HDMI inputUlrich Hecht1-2/+66
Identical to the setup on Koelsch. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15ARM: dts: gose: Enable UHS-I SDR-50 and SDR-104Simon Horman1-3/+31
Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1,2}. And the sd-uhs-sdr104 property to SDHI0. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-03-13ARM: dts: gose: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7793.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03ARM: dts: gose: Add da9063 PMIC device node for system restartGeert Uytterhoeven1-0/+21
Enable i2c6, and add a device node for the da9063 PMIC, with subnodes for rtc and wdt. Regulator support is not yet included. This allows the system to be restarted when the watchdog timer times out, or when a system restart is requested. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: gose: use generic pinctrl properties in SDHI nodesSimon Horman1-6/+6
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14ARM: dts: gose: Name spi pfc subnode after device nameGeert Uytterhoeven1-1/+1
Name the Pin Function Controller subnode for QSPI after its device name, instead of after the spi interface alias. This avoids conflicts when enabling support for more spi interfaces later, either here or in a DT overlay. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14ARM: dts: gose: Name serial port pfc subnodes after device namesGeert Uytterhoeven1-2/+2
Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after their device names, instead of after the serial port aliases. This avoids conflicts when enabling support for more serial ports later, either here or in a DT overlay. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30ARM: dts: gose: Fix W=1 dtc warningsGeert Uytterhoeven1-6/+6
Warning (unit_address_vs_reg): Node /regulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@5 has a unit name, but no reg property Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-25ARM: dts: gose: Enable SDHI controllersUlrich Hecht1-0/+119
Includes regulator and pin assignments. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28ARM: dts: gose: Remove unnecessary clock-output-names propertiesSimon Horman1-2/+1
* Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28ARM: dts: gose: use generic pinctrl propertiesSimon Horman1-20/+20
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the gose device tree to use the generic Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-19ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source propertySimon Horman1-11/+11
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Changelog text from a similar patch by Sudeep Holla. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2016-02-09ARM: dts: gose: Enable SCIF_CLK frequency and pinsGeert Uytterhoeven1-0/+13
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-29ARM: dts: gose: enable sound DMA support via DVC in device treeSimon Horman1-2/+19
Enable DMA transfer using DVC in r8a7793/gose device tree. DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-29ARM: dts: gose: enable sound DMA support via SRC in device treeSimon Horman1-2/+2
Enable DMA transfer to/from SRC in r8a7793/gose device tree. DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Based on similar work for the r8a7791/koeslch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-29ARM: dts: gose: enable sound DMA support via BUSIF in device treeSimon Horman1-5/+0
Enable DMA transfer to/from SSIU in gose/r8a7791 device tree. DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-29ARM: dts: gose: enable sound DMA support in device treeSimon Horman1-2/+2
Enable DMA transfer to/from SSI in r8a7793/gose device tree. DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-29ARM: dts: gose: Enable sound PIO support in device treeSimon Horman1-0/+77
Enable sound PIO support in the r8a7793/gose device tree. Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-29ARM: dts: r8a7793: gose: Add HDMI video out supportMagnus Damm1-0/+85
This patch adds r8a7793 GOSE HDMI video out support. The r8a7793 GOSE board is similar to r8a7791 Koelsch. For those boards an on-board HDMI encoder chip provides HDMI video out and also a LVDS port is available for external LCD panels. Tested on r8a7793 Gose with HDMI hooked up to a Toshiba TV. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> [simon: rebased; reused existing i2c2 node] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25ARM: dts: gose: add i2c2 bus to device treeSimon Horman1-0/+19
Activate i2c2 bus in r8a7793/gose device tree. Based on similar work for the r8a7791/koelsch by Wolfram Sang. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25ARM: dts: gose: Add GPIO leds to DTSimon Horman1-0/+16
Instantiate the GPIO leds in the gose device tree. Based on similar work for the koelsch board by Magnus Damm. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Magnus Damm <damm+renesas@opensource.se>
2016-01-25ARM: dts: gose: Add GPIO keys to DTSimon Horman1-0/+82
Instantiate the GPIO keys in the gose device tree. Based on similar work for the koelsch board by Laurent Pinchart. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Magnus Damm <damm+renesas@opensource.se>
2016-01-07ARM: dts: gose: Add compatible property to "partitions" nodeGeert Uytterhoeven1-0/+1
As of commit e488ca9f8d4f62c2 ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10ARM: shmobile: gose dts: Add serial port config to chosen/stdout-pathGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-13ARM: shmobile: gose: Add QSPI device to DTSimon Horman1-0/+43
Enable the QSPI controller in the gose device tree. Based on similar work for the silk board by Vladimir Barinov and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-10ARM: shmobile: gose: Configure PFC in DTSimon Horman1-0/+31
Configure PFC for the already enabled scif and ethernet devices in the device tree for the gose board. Based on similar work for the koelsch board by Laurent Pinchart and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-07-06ARM: shmobile: r8a7793: add minimal Gose board device treeUlrich Hecht1-0/+63
Minimal DT description and Makefile entry for the Gose eval board. Support for console, timer, and Ethernet. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.