aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7794-alt.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-07-23ARM: dts: convert to SPDX identifier for Renesas boardsWolfram Sang1-4/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-08ARM: shmobile: r8a7794: alt: add EEPROM to DTSWolfram Sang1-0/+6
Same EEPROM as on Koelsch, et al. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-02ARM: dts: alt: Drop unnecessary address properties from vin port nodeSimon Horman1-3/+0
The vin port node does not have an address and thus does not need address-cells or address size-properties. This is flagged by dtc as follows: # make dtbs W=1 arch/arm/boot/dts/r8a7794-alt.dtb: Warning (avoid_unnecessary_addr_size): /soc/video@e6ef0000/port: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2018-04-25ARM: dts: alt: Enable watchdog supportGeert Uytterhoeven1-0/+5
Enable the watchdog, so the board can be restarted by a watchdog timeout. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: alt: use demuxer for I2C1Wolfram Sang1-16/+37
Create a separate bus for HDMI related I2C1 and provide fallback to GPIO. Based on work for the r8a7790/lager by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, fixed aliases, switched to named GPIOs] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-12-04ARM: dts: alt: Convert to named i2c-gpio bindingsGeert Uytterhoeven1-3/+2
Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the more error-prone unnamed variant. Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly assumed before. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-19ARM: dts: alt: use correct logic for SD WP pinsWolfram Sang1-2/+2
The WP pins are ACTIVE_HIGH, fix it in the DTS. Fixes: 2b41091b896b ("ARM: dts: alt: add SDHI0 and 1 support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18ARM: dts: r8a7794: Convert to new CPG/MSSR bindingsGeert Uytterhoeven1-2/+1
Convert the R-Car E2 SoC from the old "Renesas R-Car Gen2 Clock Pulse Generator (CPG)", "Renesas CPG DIV6 Clock", and "Renesas CPG Module Stop (MSTP) Clocks" DT bindings to the new unified "Renesas Clock Pulse Generator / Module Standby and Software Reset" DT bindings. This simplifies the DTS files, and allows to add support for reset control later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-28ARM: dts: alt: Correct clock of DU1Geert Uytterhoeven1-1/+1
The second channel of the display unit uses a different module clock than the first channel. Fixes: 876e7fb9f418fd86 ("ARM: shmobile: r8a7794: alt: Enable VGA port") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: alt: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7794.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23ARM: dts: alt: Enable UHS-I SDR-104Simon Horman1-0/+1
And the sd-uhs-sdr104 property to SDHI0. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-11-23ARM: dts: alt: use demuxer for I2C4Simon Horman1-0/+35
Make it possible to fallback to GPIO for I2C4 on the EXIO-B connector. This is based on reference work for the I2C0 core of the lager/r8a7790 by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased and fixed aliases] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-11-23ARM: dts: alt: Fix PFC names for DUJacopo Mondi1-2/+2
Update the PFC pin groups and function names of DU interface for r8a7794 ALT board. The currently specified pin groups and function names prevented PFC and DU interfaces from being correctly configured: sh-pfc e6060000.pin-controller: function 'du' not supported sh-pfc e6060000.pin-controller: invalid function du in map table sh-pfc e6060000.pin-controller: function 'du' not supported sh-pfc e6060000.pin-controller: invalid function du in map table sh-pfc e6060000.pin-controller: function 'du' not supported sh-pfc e6060000.pin-controller: invalid function du in map table sh-pfc e6060000.pin-controller: function 'du' not supported sh-pfc e6060000.pin-controller: invalid function du in map table rcar-du: probe of feb00000.display failed with error -22 Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: alt: enable UHS for SDHI 0 & 1Simon Horman1-2/+20
Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1}. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-08-17ARM: dts: alt: add MMCIF supportSimon Horman1-0/+25
Define the Alt board dependent part of the MMCIF device node. Like the Silk the board has eMMC chip along with the necessary voltage regulator (note that the Vcc/Vccq regulator is dummy -- it's required by the MMCIF driver but doesn't actually exist on the board). Based on work for the Silk board by Vladimir Barinov and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-17ARM: dts: alt: add SDHI0 and 1 supportSimon Horman1-0/+81
Define the Alt board dependent part of the SDHI0 and 1 device nodes along with the necessary voltage regulators. Based on work by the original patch by Vladimir Barinov and Sergei Shtylyov for the Silk board. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14ARM: dts: alt: Name spi pfc subnode after device nameGeert Uytterhoeven1-1/+1
Name the Pin Function Controller subnode for QSPI after its device name, instead of after the spi interface alias. This avoids conflicts when enabling support for more spi interfaces later, either here or in a DT overlay. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14ARM: dts: alt: Name serial port pfc subnode after device nameGeert Uytterhoeven1-1/+1
Name the Pin Function Controller subnode for SCIF2 after its device name, instead of using some arbitrary name that looks like a serial port alias, but differs from the actual alias. This avoids conflicts when enabling support for more serial ports later, either here or in a DT overlay. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28ARM: dts: alt: use generic pinctrl propertiesSimon Horman1-16/+16
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the alt device tree to use the generic properties. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-09ARM: dts: alt: Enable SCIF_CLK frequency and pinsGeert Uytterhoeven1-0/+13
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25ARM: dts: alt: Add QSPI device to DTSimon Horman1-0/+46
Enable the QSPI controller in the alt device tree. Based similar work for the silk board by by Vladimir Barinov and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-10ARM: shmobile: alt dts: Add serial port config to chosen/stdout-pathGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: alt: Correct ether pfcSimon Horman1-3/+6
22b160713cb6 ("ARM: shmobile: alt: Add pfc pins to DT") introduced pfc pins to the alt device tree but did not reference them. This patch fixes ether pfc by: * Referencing ether pins * Adding and referencing phy1 pins * Removing ether b pins. These are not used in the configuration of the alt board used for testing and empirically their presence prevents ethernet from functioning correctly in that environment. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: alt: Correct scif2 pfcSimon Horman1-0/+3
22b160713cb6 ("ARM: shmobile: alt: Add pfc pins to DT") introduced pfc pins to the alt device tree but did not reference them. This patch fixes scif2 pfc by adding references to the scif2 pins. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24ARM: shmobile: r8a7794: alt: Enable PFC DU for the VGA portMagnus Damm1-0/+7
Tie in r8a7794 PFC DU support to the VGA port on the r8a7794 ALT board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-18ARM: shmobile: alt: add VIN0, ADV7180 DT supportUlrich Hecht1-0/+34
Adds the device board-dependent part of the VIN0 device and its ADV7180 video decoder on I2C1, and the interconnection between them. Based on silk patch by Sergei Shtylyov. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-18ARM: shmobile: alt: add I2C1 DT supportUlrich Hecht1-0/+13
Defines the board-dependent part of the I2C1 device. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-18ARM: shmobile: alt: Add pfc pins to DTSimon Horman1-0/+17
PFC is already enabled on the r8a7794. This adds pins for devices already enabled in DT on the r8a7794 based alt board. Based on work by Mitsuhiro Kimura and Hisashi Nakamura. Cc: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Cc: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
2015-11-17ARM: shmobile: r8a7794: alt: Enable VGA portMagnus Damm1-0/+61
Enable the DU device and the VGA port available on the r8a7794 ALT board. The VGA portion of the ALT board is somewhat similar to the Lager board but in case of ALT the DU1 pins are used and the X2 clock has a reduced frequency. This patch does not include any pinctrl (PFC) settings due to lack of PFC DT integration on r8a7794. At this point the default state of the boot loader is enough to keep the VGA port working without changing any pinctrl settings. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01ARM: shmobile: r8a7794: alt: Fix ethernet controller PHY IRQ lineLaurent Pinchart1-1/+1
The PHY IRQ line is connected to external IRQ8, not IRQ0. Fix DT accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a7794: alt: Enable ethernet controllerLaurent Pinchart1-0/+13
Enable the ethernet controller for the Alt board. Pin muxing entries are currently left out as r8a7794 pin control support isn't available yet. We thus rely on the boot loader to configure ethernet pins for now. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21ARM: shmobile: alt dts: Replace status value "ok" by "okay"Geert Uytterhoeven1-2/+2
While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-05ARM: shmobile: alt dts: Drop console= bootargs parameterSimon Horman1-1/+1
Alt is booted from DT, so chosen/stdout-path is always used, and we can drop the "console=" parameter from chosen/bootargs. This change has a side-effect of changing the console speed from 38400 to 115200. This is intentional as 115200 is consistently used on all other shmobile boards. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-24ARM: shmobile: alt dts: Add chosen/stdout-pathGeert Uytterhoeven1-0/+1
Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=ttySC0,38400" parameter in chosen/bootargs, else the console will use the default setting of 115200 baud. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-09-09ARM: shmobile: Initial Alt board device treeUlrich Hecht1-0/+47
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> [uli: reduced to minimum, added cmt, enabled scif2, split off from SoC] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.