linux-dev - Linux kernel development work

Age	Commit message (Collapse)	Author	Files	Lines
2017-01-02	ARM: dts: rockchip: use pin constants to describe gpios	Andy Yan	1	-2/+2
	Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-16	ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards	Javier Martinez Canillas	1	-1/+1
	This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-05-30	ARM: dts: rockchip: move rk3288 io-domain nodes to the grf	Heiko Stuebner	1	-16/+15
	io-voltage control is actually part of the grf, so move the node under the newly available grf simple-mfd. To minimize duplicate code, the core node and compatible property gets placed in the core rk3288.dtsi while the individual boards now only need to enable it and add the necessary supply properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-24	ARM: dts: rockchip: Add the iodomains for the Rock2 SOM	Sjoerd Simons	1	-0/+26
	Add the IO domain configuration for the Rock2 SOM and model the fixed regulator used as the vqmmc for the EMMC device. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-19	ARM: dts: rockchip: set system-power-controller property on rk3288-rock2	John Keeping	1	-0/+1
	The act8846 on rock2 boards controls the system power, so add the appropriate property to allow turning off the board. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-10-08	ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square board	Sjoerd Simons	1	-0/+277
	The Radxa Rock 2 Square board is a combination of the Radxa Rock 2 SoM with the Square baseboard. Add a dtsi for the SoM which can be included into the dts for the various baseboards (e.g. full and square) and a dts for the square board. Currently supported are serial console, wired networking, hdmi output, eMMC and SD storage and USB. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>