aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sama5d2.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-01-30ARM: dts: Kill off skeleton{64}.dtsiRob Herring1-1/+3
Remove the usage of skeleton.dtsi in the remaining dts files. It was deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"). This will make adding a unit-address to memory nodes easier. The main tricky part to removing skeleton.dtsi is we could end up with no /memory node at all when a bootloader depends on one being present. I hacked up dtc to check for this condition. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-11-21ARM: dts: at91: sama5d2: switch to new clock bindingAlexandre Belloni1-610/+60
Switch sama5d2 boards to the new PMC clock bindings. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-21ARM: dts: at91: sama5d2: use the divided clock for SMCRomain Izard1-1/+1
The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two different clocks for the peripherals in the SoC. The Static Memory controller is connected to the divided master clock. Unfortunately, the device tree does not correctly show this and uses the master clock directly. This clock is then used by the code for the NAND controller to calculate the timings for the controller, and we end up with slow NAND Flash access. Fix the device tree, and the performance of Flash access is improved. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-19arm: dts: sama5d2: Update coresight bindings for hardware portsSuzuki K Poulose1-7/+10
Switch to the new coresight bindings for hardware ports Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2Nicolas Ferre1-38/+0
As the new bindings are already in place in sama5d2.dtsi and that it's used in the only Mainline board for this product (at91-sama5d2_ptc_ek.dts), we can safely remove the old bindings. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: add nodes for I2S controllersCyrille Pitchen1-0/+38
This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for each I2S node. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [codrin.ciubotariu@microchip.com: removed unnecessary clock phandles] Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: add I2S clock muxing nodesCodrin Ciubotariu1-0/+18
This patch adds two clock muxes for the two I2S buses present on sama5d2 platforms. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: Add resistive touch deviceEugen Hristev1-0/+10
Add generic resistive touch device which is connected to ADC block inside the SAMA5D2 SoC Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: add channel cells for ADC deviceEugen Hristev1-0/+2
Preparing the ADC device to connect channel consumer drivers Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-12-31ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-04ARM: dts: at91: sama5d2: added dma property for ADC deviceEugen Hristev1-0/+2
Added DMA property for ADC device Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-16Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-6/+6
Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-6/+6
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-09ARM: dts: at91: sama5d2: add ADC hw trigger edge typeEugen Hristev1-0/+1
Added ADTRG edge type property as interrupt edge type value Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-09-10Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+76
Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
2017-07-26ARM: dts: at91: sama5d2: add classd nodesCyrille Pitchen1-1/+38
This patch adds nodes for the classd device and its generated clock. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-17ARM: dts: at91: sama5d2: fix EBI/NAND controllers declarationLudovic Desroches1-5/+5
Fix HSMC interrupt ID, PMECC registers and EBI ones. Fixes: d9c41bf30cf8 ("ARM: dts: at91: Declare EBI/NAND controllers") Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-17ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMCLudovic Desroches1-1/+1
A new compatible string has been introduced for sama5d2 SMC to allow to manage the registers mapping change. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-17ARM: dts: at91: sama5d2: add isc nodeSongjun Wu1-0/+16
Add isc node, it conflicts with pdmic and uart3. Signed-off-by: Songjun Wu <songjun.wu@microchip.com> [claudiu.beznea@microchip.com: place isc node after hlcdc node] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-17ARM: dts: at91: sama5d2: add QSPI nodesCyrille Pitchen1-0/+22
This patch adds DT nodes for sama5d2 QSPI controllers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31ARM: dts: at91: sama5d2_xplained: add pwm controllerClaudiu Beznea1-0/+8
Add pwm controller bindings for sama5d2_xplained and enable it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31ARM: dts: at91: Declare EBI/NAND controllersBoris Brezillon1-0/+53
Declare new nodes for the EBI and NAND controllers embedded in various at91/sama5 SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-15ARM: dts: at91: sama5d2: add m_can nodesWenyou Yang1-0/+56
Add nodes to support the Controller Area Network(M_CAN) on SAMA5D2. The version of M_CAN IP core is 3.1.0 (CREL = 0x31040730). As said in SAMA5D2 datasheet, the CAN clock is recommended to use frequencies of 20, 40 or 80 MHz. To achieve these frequencies, PMC GCLK3 must select the UPLLCK(480 MHz) as source clock and divide by 24, 12, or 6. So, the "assigned-clock-rates" property has three options: 20000000, 40000000, and 80000000. The "assigned-clock-parents" property should be referred to utmi fixedly. The MSBs [bits 31:16] of the CAN Message RAM for CAN0 and CAN1 are default configured in 0x00200000. To avoid conflict with SRAM map for PM, change them to 0x00210000 in the AT91Bootstrap via setting the CAN Memories Address-based Register(SFR_CAN) of SFR. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-09Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+5
Pull ARM Device-tree updates from Olof Johansson: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits) ARM: dts: exynos: Use - instead of @ for DT OPP entries arm: spear6xx: add DT description of the ADC on SPEAr600 arm: spear6xx: remove unneeded pinctrl properties in spear600-evb arm: spear6xx: switch spear600-evb to the new flash partition DT binding arm: spear6xx: fix spaces in spear600-evb.dts arm: spear6xx: use node labels in spear600-evb.dts arm: spear6xx: add labels to various nodes in spear600.dtsi ARM: dts: vexpress: fix few unit address format warnings ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: armada-38x: label USB and SATA nodes ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ...
2017-03-05Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node"Romain Izard1-1/+1
This reverts commit cab43282682e ("ARM: at91/dt: sama5d2: Use new compatible for ohci node") It depends from commit 7150bc9b4d43 ("usb: ohci-at91: Forcibly suspend ports while USB suspend") which was reverted and implemented differently. With the new implementation, the compatible string must remain the same. The compatible string introduced by this commit has been used in the default SAMA5D2 dtsi starting from Linux 4.8. As it has never been working correctly in an official release, removing it should not be breaking the stability rules. Fixes: cab43282682e ("ARM: at91/dt: sama5d2: Use new compatible for ohci node") Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> cc: <stable@vger.kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-05ARM: dts: at91: sama5d2: add sfrbuAlexandre Belloni1-0/+5
SFRBU, the Special Function Registers Backup manage specific aspects of the integrated memory, bridge implementations, processor and other functionality not controlled elsewhere. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10ARM: dts: at91: sama5d2: add ssc0 definitionAlex1-0/+16
The sama5d2 SoC has Synchronous Serial Controller which provides synchronous communication link with external devices. It's generally used in audio and telecom applications such as I2S, Short Frame Sync, Long Frame Sync. Signed-off-by: Alex Gershgorin <alex.gershgorin@qcore.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10ARM: dts: at91: sama5d2: move UART3 to DMA1Nicolas Ferre1-2/+2
Now that DMA1 is defined, use it to distribute channel usage among the two controllers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10ARM: dts: at91: add dma1 definition to sama5d2Nicolas Ferre1-0/+10
The sama5d2 SoC has a second DMA controller and can be used just like DMA0. By default both DMA controllers are configured as "Secure" in MATRIX_SPSELR so we can use whichever we want in a "single Secure World" configuration. Surprisingly the DMA1 has a lower address than DMA0. To avoid confusion place it after DMA0 node anyway. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-07ARM: dts: at91: sama5d2: Add securam nodeAlexandre Belloni1-0/+14
The sama5d2 has some static RAM that can be erased by the security module, add its node Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-07ARM: dts: at91: sama5d2: Add secumod nodeAlexandre Belloni1-0/+5
The sama5d2 has a security module, add its node. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-07ARM: dts: at91: sama5d2: use correct sckc compatibleAlexandre Belloni1-22/+4
the sama5d2 sckc is actually sama5d4 compatible Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20ARM: dts: at91: sama5d2: enable FIFOs for high-speed i2c controllersCyrille Pitchen1-0/+2
This patch enables the RX and TX FIFOs (16 data each) of the two high-speed i2c controllers (i2c0 and i2c1). Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-08ARM: dts: at91: sama5d2: add ETM and ETB nodesOlivier Schonken1-0/+29
Add node to support SAMA5D2 Embedded Trace Macrocell and Embedded Trace Buffer. This patch depends on coresight-etm3x: Add ARM ETM-A5 peripheral ID for proper coresight functionality. It also depends on clocksource: timer-atmel-pit: enable mck to not stall SAMA5D2 on bootup. Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-01Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-16/+21
Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ...
2016-07-15ARM: dts: at91: Fix USB endpoint nodesAlexandre Belloni1-16/+16
Endpoint nodes have a reg property. Add their mandatory unit-address. This solves: Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep0 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep1 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep2 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep3 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep4 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep5 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep6 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep7 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep8 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep9 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep10 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep11 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep12 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep13 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep14 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep15 has a reg or ranges property, but no unit name Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-04ARM: dts: at91: sama5d2: add PMU nodeOlivier Schonken1-0/+5
Add node to support SAMA5D2 Performance Monitor Unit. Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-07ARM: at91/dt: sama5d2: Use new compatible for ohci nodeWenyou Yang1-1/+1
Use compatible "atmel,sama5d2-ohci" to be capable of suspending ports while sleep to save the power consumption. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-18Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+53
Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, which as usual makes up the bulk of the ARM SoC changes: 462 non-merge changesets, 450 files changed, 23340 insertions, 5216 deletions. The three platforms that are added with the "soc" branch are here as well, and we add some related machine files: - For Aspeed AST2400/AST2500, we get the evaluation platform and the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC - For Oxnas 810SE, the Western Digital "My Book World Edition" is added as the only platform at the moment. - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are supported On the ARM Realview development platform, we now support all machines with device tree, previously only the board files were supported, which in turn will likely be removed soon. Qualcomm IPQ4019 is the second generation ARM based "Internet Processor", following the IPQ806x that is used in many high-end WiFi routers. This one integrates two ath10k wifi radios that were previously on separate chips. Other boards that got added for existing chips are: Ti OMAP family: - Amazon Kindle Fire, first generation, tablet and ebook reader - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM development systems Samsung EXYNOS platform: - Samsung ARTIK5 evaluation board, see https://www.artik.io/modules/overview/artik-5/ NXP i.MX platforms: - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx, TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial SoM modules - Embest MarS Board i.MX6Dual DIY platform - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX Nitrogen6sx embedded boards - Technexion Pico i.MX6UL compute module - ZII VF610 Development Board Marvell embedded (mvebu, orion, kirkwood) platforms: - Linksys Viper (E4200v2 / EA4500) WiFi router - Buffalo Kurobox Pro NAS Qualcomm Snapdragon: - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600 Rockchips platform: - mqmaker MiQi single-board computer Altera SoCFPGA: - samtec VIN|ING 1000 vehicle communication interface Allwinner Sunxi platforms: - Dserve DSRV9703C tablet - Difrnce DIT4350 tablet - Colorfly E708 Q1 tablet - Polaroid MID2809PXE04 tablet - Olimex A20 OLinuXino LIME2 single board computer - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board computers Across many platforms, bug fixes went in to address warnings that dtc now emits with 'make dtbs W=1'. Further changes for device enablement went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM Versatile Express" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits) ARM: dts: tango4: Import watchdog node ARM: dts: tango4: Update cpus node for cpufreq ARM: dts: tango4: Update DT to match clk driver ARM: dts: tango4: Initial thermal support arm/dst: Add Aspeed ast2500 device tree arm/dts: Add Aspeed ast2400 device tree ARM: sun7i: dt: Add pll3 and pll7 clocks ARM: dts: sunxi: Add a olinuxino-lime2-emmc ARM: dts: at91: sama5d4: add trng node ARM: dts: at91: sama5d3: add trng node ARM: dts: at91: sama5d2: add trng node ARM: dts: at91: at91sam9g45 family: reduce the trng register map size ARM: sun4i: dt: Add pll3 and pll7 clocks ARM: sun5i: chip: Enable the TV Encoder ARM: sun5i: r8: Add display blocks to the DTSI ARM: sun5i: a13: Add display and TCON clocks ARM: dts: ux500: configure the accelerometers open drain ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ...
2016-05-10ARM: dts: at91: sama5d2: use "atmel,sama5d3-nfc" compatible for nfcWenyou Yang1-1/+1
An error in documentation of the NAND Flash Controller (NFC) led to choose another compatibility string for sama5d2 with an impact on the NAND flash ready/busy information. It was producing the error message: atmel_nand 80000000.nand: Time out to wait for interrupt: 0x08000000 and had an impact on performance. So, switch back to the classical "atmel,sama5d3-nfc" compatibility string for this SoC which gives the proper ready/busy bit information. The NAND flash driver will be updated to remove the support for this different implementation. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Romain Izard <romain.izard.pro@gmail.com> [nicolas.ferre@atmel.com: change commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-06ARM: dts: at91: sama5d2: add trng nodeMike Williams1-0/+7
Add node to support SAMA5D2 hardware random number generator. Signed-off-by: Mike Williams <mike@mikebwilliams.com> [nicolas.ferre@atmel.com: reduce the register map size] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: dts: at91: sama5d2: add slow clock to watchdog nodeNicolas Ferre1-0/+1
As the watchdog timer needs the slow clock, add it to the currently defined wdt node. Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27ARM: dts: at91: sama5d2: add shutdown controller nodeNicolas Ferre1-0/+9
Add the SAMA5D2-Compatible Shutdown Controller node to sama5d2.dtsi and the use of it in the sama5d2 Xplained board dts file. Enable the RTC wakeup event and the "wake up" button support through the input "0" that is present on the board. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-29ARM: dts: at91: sama5d2: add LCD controllerNicolas Ferre1-0/+26
Add LCD controller node that binds to the atmel_hlcdc DRM driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-29ARM: dts: at91: sama5d2: add chipid nodeLudovic Desroches1-0/+5
Add node for chipid device in order to have access to the CIDR and EXID values. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-29ARM: dts: at91: sama5d2: add SFR nodeCyrille Pitchen1-0/+5
This SFR node is looked up by the I2S controller driver to tune the SFR_I2SCLKSEL register. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-02Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dtArnd Bergmann1-0/+73
Merge "at91: dt for 4.6 #2" from Nicolas Ferre: Second 4.6 DT series, all patches for sama5d2 and its Xplained board: - addition of the NAND flash node - addition of the dma properties for UART/USART nodes - one update of the sama5d2 Xplained phy node - addition of USB pinmux, button and leds * tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d2 Xplained: add leds node ARM: dts: at91: sama5d2 Xplained: add user push button ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes ARM: dts: at91: sama5d2: add dma properties to UART nodes ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
2016-03-01ARM: dts: at91: sama5d2: add nand0 and nfc0 nodesRomain Izard1-0/+38
Both nodes are required to access NAND Flash memory. Additional settings will be necessary at the board level to use it. Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-01ARM: dts: at91: sama5d2: add dma properties to UART nodesNicolas Ferre1-0/+35
The dmas/dma-names properties are added to the UART nodes. Note that additional properties are needed to enable them at the board level: check bindings for details. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-02-18ARM: dts: at91: sama5d2: add adc deviceLudovic Desroches1-6/+12
Add the ADC device, and remove the adc_op_clk which is useless since the adc sampling frequency is configured with sysfs. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.