aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sama5d3xmb.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-3/+3
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-07-15ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitionsAlexandre Belloni1-12/+0
Separate the definitions for the emac and the gmac in different files and include them in the final board dts that uses them. Solves: Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@f0028000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@f802c000 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-21ARM: at91/dt: ov2640: add hsync/vsync-active propertyJosh Wu1-0/+2
On at91sam9x5ek/at91sam9m10g45ek/sama5d3xek boards, we use the parallel connection for ov2640. So we must set the hsync/vsync property (1 means active high). Otherwise, the connection would be seen as BT.656 or BT.1120. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-17Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
2015-02-02Merge tag 'at91-cleanup3' into at91-3.20-socNicolas Ferre1-4/+36
2015-01-26ARM: at91: sama5d3xek/dt: use dt ids for wm8904Alexander Morozov1-1/+1
Using the wm8904 device tree compatible string. Signed-off-by: Alexander Morozov <linux@meltdown.ru> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: add ov2640 camera sensor supportJosh Wu1-2/+29
According to v4l2 dt document, we add: a camera host: ISI port. a i2c camera sensor: ov2640 port. to sama5d3xmb.dtsi. The ov2640 node defines the pinctrls, clocks and refer to isi port. The ISI node also has a reference to the ov2640 port. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCKJosh Wu1-2/+2
For sama5d3xmb board, the pins: pinctrl_isi_pck_as_mck is pck1, and used to provide MCK for camera sensor. We change its name to: pinctrl_pck1_as_isi_mck. As we want camera sensor instead of ISI to configure the pck1 (ISI_MCK) pin. So we remove this pinctrl from ISI DT node. It will be added in sensor's DT node. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}Josh Wu1-3/+3
For sama5d3xmb board, the pins: pinctrl_isi_{power,reset} is used to power-down or reset camera sensor. So we should let camera sensor instead of ISI to configure the pins. This patch will change pinctrl name from pinctrl_isi_{power,reset} to pinctrl_sensor_{power,reset}. And remove these two pinctrl from ISI's DT node. We will add these two pinctrl to sensor's DT node. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: move the isi mck pin to mbBo Shen1-0/+5
The mck is decided by the board design, move it to mb related dtsi file. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: split isi pinctrlBo Shen1-1/+1
As the ISI has 12 data lines, however we only use 8 data lines with sensor module. So, split the data line into two groups which make it can be choosed depends on the hardware design. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-12ARM: at91: sama5d3: dt: correct the sound routeBo Shen1-1/+1
The MICBIAS is a supply, should route to MIC while not IN1L. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91: sama5d3xek: reserve dma channel for audioBo Shen1-0/+4
We set the DMA configuration on USARTs in the SoC DT in (ARM: at91: sama5d3: add usart dma configurations). As the audio must work with DMA channels, we reserve some dma channels for audio, or else audio won't work. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: move to the sama5d3xmb.dtsi to cover all board variants] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: sama5d3xek: switch sound to CCFBo Shen1-0/+2
As the sama5d3xek board has switch to CCF, so add clock for wm8904 Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviwed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18ARM: at91: sama5d3: clock for ssc from rk pinBo Shen1-0/+4
According to hardware design the clock for SSC device is from rk pin. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18ARM: at91: sama5d3: add the missing propertyBo Shen1-0/+1
If without the MICBIAS routing, the record don't work. Add the missing MICBIAS routing to let record from mic working. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18ARM: at91: sama5d3: correct the sound compatible stringBo Shen1-1/+1
As the sama5d3 dtsi file in go into mainline before sound driver, and, the sound compatible string is changed when go into mainline. Add this patch to correct the sound compatible string. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18ARM: at91: sama5d3: disable sound by defaultBo Shen1-0/+2
Make the sound device in disabled status by default Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-29ARM: at91/dt: fix phy address in sama5xmb to match the reg propertyBoris BREZILLON1-1/+1
Fix phy0 address to match the reg property defined in phy0 node. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26ARM: at91/dt: define phy available on sama5d3 mother boardBoris BREZILLON1-0/+8
This patch describe the phy used on atmel sama5d3 mother board: - phy address - phy interrupt pin Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17ARM: at91: dt: switch to pinctrl to pre-processorJean-Christophe PLAGNIOL-VILLARD1-6/+6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: switch to standard GPIO flag defines.Jean-Christophe PLAGNIOL-VILLARD1-6/+6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: use #include for all device treesJean-Christophe PLAGNIOL-VILLARD1-1/+1
to prepare the switch to the macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-26ARM: at91: dt: add device tree files for SAMA5D3 familyLudovic Desroches1-0/+166
Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.