aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12ARM: shmobile: kzm9g: add FSI support for DTSKuninori Morimoto1-0/+33
This patch support FSI-AK4648 with simple audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: kzm9g-reference: Add GPIO keys to DTLaurent Pinchart1-0/+46
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DTLaurent Pinchart1-0/+11
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: kzm9g-reference: Use falling edge IRQ for LAN9221Laurent Pinchart1-1/+1
The device is configured to generate an active-low interrupt signal that is automatically deasserted without requiring any action from the host. Configure the IRQ to trigger on falling edge. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in board DT filesLaurent Pinchart1-1/+2
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use #include in device tree sourcesLaurent Pinchart1-1/+1
In order to allow usage of the preprocessor in the SoC device tree sources, switch from /include/ to #include. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: kzm9g: tidyup DT node namingKuninori Morimoto1-4/+4
According to ePAPR spec, this patch tidies up DT node name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boardsGuennadi Liakhovetski1-0/+2
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-09Merge tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-08-05ARM: shmobile: Mount root file systems in r/w mode for all DT platformsLaurent Pinchart1-1/+1
The shmobile DT files available in the kernel are reference implementations intended to be used as sample code, as well as for development. As such, it makes sense to mount the root file system in read/write mode by default. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device treeLaurent Pinchart1-0/+16
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: kzm9g-reference: Move SDHI regulators to DTLaurent Pinchart1-2/+21
Create two GPIO-controlled fixed-voltage regulators in the kzm9g-reference DT and remove manual configuration of the corresponding GPIOs from board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device treeLaurent Pinchart1-0/+51
Replace the pinctrl mappings in board code by device tree mappings. For devices that are still instantiated from board code reference the mappings as the default pin controller state to apply them at boot time. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindingsGuennadi Liakhovetski1-0/+86
This adds DT bindings for an AS3711 PMIC, used for supplying power to the CPU, some peripherals and the backlight, as well as extends the cpu0 DT node with OPPs and a reference to the PMIC to support the CPUFreq and CPU DVFS functions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03ARM: shmobile: kzm9g-reference: add ethernet supportGuennadi Liakhovetski1-0/+13
Add a DT node for the SMSC 9221 ethernet chip, found on kzm9g, to its reference implementation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsiGuennadi Liakhovetski1-26/+15
To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supplyGuennadi Liakhovetski1-6/+6
kzm9g supplies 3.3V to its SDHI0 and SDHI2 interfaces. Specifying 2.8V prevents some (e.g. certain SDIO) cards from working. This patch fixes the voltage and removes redundant OCR masks from platform data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-referenceGuennadi Liakhovetski1-3/+39
Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: kzm9g: Reference DT implementationSimon Horman1-0/+41
Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.