aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/stih407-family.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-06-27ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes nameSerge Semin1-1/+1
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Link: https://lore.kernel.org/r/20220624141622.7149-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-06-16ARM: dts: sti: adjust whitespace around '='Krzysztof Kozlowski1-87/+87
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20220526203632.831039-1-krzysztof.kozlowski@linaro.org
2022-02-15ARM: dts: sti: move some nodes out of the soc section in stih407-family.dtsiAlain Volmat1-136/+126
Move all nodes without reg property out of the soc section of stih407-family.dtsi and DT including stih407-family.dtsi. This avoid to set a <0> reg property. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-06ARM: dts: sti: add the spinor controller node within stih407-familyAlain Volmat1-0/+15
The STiH407 family (and further versions STiH410/STiH418) embedded a serial flash controller allowing fast access to SPI-NOR. This commit adds the corresponding node, relying on the st-spi-fsm drivers. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2020-04-17dts: arm: stih407-family: remove duplicated rng nodesAlain Volmat1-14/+0
the 2 rng nodes are duplicated within the stih407-family.dtsi Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 332Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as publishhed by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.292339952@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14ARM: dts: stih407-family: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard1-26/+26
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-02-13ARM: dts: STi: Update sound related nodes locationPatrice Chotard1-7/+7
Move sound node outside soc node and sti_sasg_codec node as child of syscfg_core node. This allows to fix the following warning when compiling dtb with W=1 option: arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg): Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg): Node /soc/sound/simple-audio-card,dai-link@1 has a unit name, but no reg property arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg): Node /soc/sound/simple-audio-card,dai-link@2 has a unit name, but no reg property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/sti-sasg-codec missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg): Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg): Node /soc/sound/simple-audio-card,dai-link@1 has a unit name, but no reg property arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg): Node /soc/sound/simple-audio-card,dai-link@2 has a unit name, but no reg property arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/sound missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/sti-sasg-codec missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (unit_address_vs_reg): Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/sti-sasg-codec missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/sound missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/sti-sasg-codec missing or empty reg/ranges property Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-02-12ARM: dts: STi: Add fake reg property for usb2_picophyX nodesPatrice Chotard1-1/+2
Add fake reg property for usb2_picophy nodes. This allows to fix the following warning when compiling dtb with W=1 option : arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/phy2 missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/phy3 missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/phy2 missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/phy3 missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/phy2 missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/phy3 missing or empty reg/ranges property Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-02-12ARM: dts: STi: Add fake reg for restart, powerdown and picophy/softresetPatrice Chotard1-4/+8
Add fake reg property for restart, powerdown, picophyreset and softreset. This allows to fix the following warning when compiling dtb with W=1 option: arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/restart missing or empty reg/ranges property arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/powerdown-controller missing or empty reg/ranges property arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/softreset-controller missing or empty reg/ranges property arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/picophyreset-controller missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/restart missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/powerdown-controller missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/softreset-controller missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/picophyreset-controller missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/restart missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/powerdown-controller missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/softreset-controller missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/picophyreset-controller missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/restart missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/powerdown-controller missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/softreset-controller missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/picophyreset-controller missing or empty reg/ranges property Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-02-12ARM: dts: STi: Add fake reg property for remote processorsPatrice Chotard1-3/+6
As st231-gp0, st231-delta are part of SoC, we add a fake reg property instead of moving all these nodes outside soc node. This allows to fix the following warning when compiling dtb with W=1 option: arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/st231-gp0 missing or empty reg/ranges property arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/st231-delta missing or empty reg/ranges property arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/delta0 missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/st231-gp0 missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/st231-delta missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/delta0 missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/st231-gp0 missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/st231-delta missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/delta0 missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/st231-gp0 missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/st231-delta missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/delta0 missing or empty reg/ranges property Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-02-12ARM: dts: STi: Add fake reg property for irq-syscfgPatrice Chotard1-1/+2
Add fake reg property to irq-syscfg node. This allows to fix the following warning when compiling dtb with W=1 option: arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/irq-syscfg missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/irq-syscfg missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/irq-syscfg missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/irq-syscfg missing or empty reg/ranges property Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-02-12ARM: dts: STi: Add fake reg property for miphy28lp_phyPatrice Chotard1-1/+2
Add fake reg property to miphy28lp_phy. This allows to fix the following warning when compiling dtb with W=1 option: arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/miphy28lp missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/miphy28lp missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg): Node /soc/miphy28lp missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/miphy28lp missing or empty reg/ranges property Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-02-12ARM: dts: STi: Fix bindings notationPatrice Chotard1-4/+4
Remove leading 0x and 0s from bindings notation Add missing unit-address and remove some which are useless. This allows to fix several warnings like : Warning (unit_address_vs_reg): Node XXXX has a reg or ranges property, but no unit name Warning (simple_bus_reg): Node XXXX simple-bus unit address format error, expected "123456" Warning (unit_address_vs_reg): Node XXXX has a unit name, but no reg property Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-9/+9
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-09Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-2/+16
Pull ARM Device-tree updates from Olof Johansson: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits) ARM: dts: exynos: Use - instead of @ for DT OPP entries arm: spear6xx: add DT description of the ADC on SPEAr600 arm: spear6xx: remove unneeded pinctrl properties in spear600-evb arm: spear6xx: switch spear600-evb to the new flash partition DT binding arm: spear6xx: fix spaces in spear600-evb.dts arm: spear6xx: use node labels in spear600-evb.dts arm: spear6xx: add labels to various nodes in spear600.dtsi ARM: dts: vexpress: fix few unit address format warnings ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: armada-38x: label USB and SATA nodes ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ...
2017-04-10[media] ARM: dts: STiH410: update sti-cec for CEC notifier supportBenjamin Gaignard1-12/+0
To use CEC notifier sti CEC driver needs to get phandle of the hdmi device. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> CC: Patrice CHOTARD <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-29ARM: dts: STiH407-family: update rproc node names to avoid conflictLoic Pallardy1-2/+2
The two st231-rproc nodes have the same name; Due to that it was impossible to distinguish them in remoteproc sysfs and debugfs interface. This patch provides them a name related to their functionality. Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
2017-03-06ARM: dts: STiH407-family: fix spi nodesPatrice Chotard1-0/+14
Some SPI nodes are missing #address-cells and #size-cells. This is causing warning at device tree compilation when some SPI device sub-nodes are defined. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-02-23Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-42/+17
Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
2017-02-22Merge tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-2/+1
Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver patchset for 4.11-rc1. Not much here, but a lot of little fixes and individual serial driver updates all over the subsystem. Majority are for the sh-sci driver and platform (the arch-specific changes have acks from the maintainer). The start of the "serial bus" code is here as well, but nothing is converted to use it yet. That work is still ongoing, hopefully will start to show up across different subsystems for 4.12 (bluetooth is one major place that will be used.) All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits) tty: pl011: Work around QDF2400 E44 stuck BUSY bit atmel_serial: Use the fractional divider when possible tty: Remove extra include in HVC console tty framework serial: exar: Enable MSI support serial: exar: Move register defines from uapi header to consumer site serial: pci: Remove unused pci_boards entries serial: exar: Move Commtech adapters to 8250_exar as well serial: exar: Fix feature control register constants serial: exar: Fix initialization of EXAR registers for ports > 0 serial: exar: Fix mapping of port I/O resources serial: sh-sci: fix hardware RX trigger level setting tty/serial: atmel: ensure state is restored after suspending serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt serdev: ttyport: check whether tty_init_dev() fails serial: 8250_pci: make pciserial_detach_ports() static ARM: dts: STiH410-b2260: Enable HW flow-control ARM: dts: STiH407-family: Use new Pinctrl groups ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control ARM: dts: STiH410-b2260: Identify the UART RTS line dt-bindings: serial: Update 'uart-has-rtscts' description ...
2017-02-21Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds1-0/+10
Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
2017-02-08[media] ARM: dts: STiH407-family: add DELTA dt nodeHugues Fruchet1-0/+10
This patch adds DT node for STMicroelectronics DELTA V4L2 video decoder Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-06ARM: dts: STiH407-family: Use new Pinctrl groupsLee Jones1-2/+1
Having just defined some new Pinctrl groups for when HW flow-control is {en,dis}abled, let's reference them for use within the driver. Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-27ARM: dts: STiH407-family: Add missing pwm irqPatrice Chotard1-0/+1
Add the missing interrupt node to properly probe the pwm device. This fix following error log : [ 0.208119] sti-pwm 9510000.pwm: Failed to obtain IRQ [ 0.222352] pwm-regulator pwm-regulator: Failed to get PWM: -517 Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-aff-by: Patrice CHOTARD <patrice.chotard@st.com>
2017-01-27ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirkPatrice Chotard1-0/+1
Since v4.10-rc1, the following logs appears in loop : [ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 801.966611] usb usb6-port1: cannot disable (err = -32) [ 806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 806.096494] usb usb6-port1: cannot disable (err = -32) After analysis, xhci try to set link in U3 and returns an error. Using snps,dis_u3_susphy_quirk fix this issue. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: Supply Mailbox properties to delta RProcPatrice Chotard1-0/+3
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: Supply mailbox properties to GP0 RProcPatrice Chotard1-0/+3
Signed-off-by: Loic Pallardy <loic.pallardy.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: update dmu remoteproc nodePatrice Chotard1-4/+4
Rename dmu_reserved to delta_reserved Rename st231_dmu to st231_delta Update the delta_reserved memory region start address Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: remove gp1 remoteproc nodePatrice Chotard1-19/+0
This node is unused, remove it Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: remove audio remoteproc nodePatrice Chotard1-16/+0
This node is unused, remove it Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: update gp0_reserved memory regionPatrice Chotard1-3/+2
Update the start address of gp0_reserved memory region and enable it Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: disable fdma1 and fdma2Patrice Chotard1-0/+4
Only fdma0 instance is used for audio, so disable the 2 others instances. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-12-15Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-26/+6
Pull ARM DT updates from Arnd Bergmann: "Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits) arm: dts: zynq: Add MicroZed board support ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: artpec: add pcie support ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name ARM: dts: Add xo to sdhc clock node on qcom platforms ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ...
2016-11-23ARM: dts: STiH407-family: fix i2c nodesLoic Pallardy1-0/+16
The I2C nodes are missing #address-cells and #size-cells. This is causing warning at device tree compilation when some I2C device sub-nodes are defined. Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
2016-10-20ARM: dts: STiH407-family: sti sound card field cleaningArnaud Pouliquen1-26/+6
Cleaning of some uni-players and uni-reader fields. Associated configurations are now handled in driver based on compatible string. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2016-10-11Merge tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds1-0/+12
Pull media updates from Mauro Carvalho Chehab: - Documentation improvements: conversion of all non-DocBook documents to Sphinx and lots of fixes to the uAPI media book - New PCI driver for Techwell TW5864 media grabber boards - New SoC driver for ATMEL Image Sensor Controller - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera drivers) - Addition of ST CEC driver - Lots of drivers fixes, improvements and additions * tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) [media] ttusb_dec: avoid the risk of go past buffer [media] cx23885: Fix some smatch warnings [media] si2165: switch to regmap [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging [media] si2165: Remove legacy attach [media] cx231xx: attach si2165 driver via i2c_client [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers [media] cx23885: attach si2165 driver via i2c_client [media] si2165: support i2c_client attach [media] si2165: avoid division by zero [media] rcar-vin: add R-Car gen2 fallback compatibility string [media] lgdt3306a: remove 20*50 msec unnecessary timeout [media] cx25821: Remove deprecated create_singlethread_workqueue [media] cx25821: Drop Freeing of Workqueue [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported [media] redrat3: hardware-specific parameters [media] redrat3: remove hw_timeout member [media] cxd2841er: BER and SNR reading for ISDB-T [media] dvb-usb: avoid link error with dib3000m{b,c| [media] dvb-usb: split out common parts of dibusb ...
2016-10-07Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+172
Pull ARM DT updates from Arnd Bergmann: "These are as usual a very large number of mostly boring updates to enable devices in existing machines, or to fix minor bugs. Notably, an ongoing treewide effort to fix warnings caused by an update to the device tree compiler. These are enabled with "make W=1" at the moment but can hopefully become the default once all issues have been addressed. No new SoC platform is added this time around (Armada 395 and Orion mv88f5181 are slight variations of existing ones), but a significant number of new dts files are added, which I list by platform: - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets, Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo single-board computers - ARM Realview: all supported machines (ported from board files) - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr reference boards for Northstar platform, Raspberry Pi Zero single-board computer - Marvell EBU: Netgear WNR854T router (ported from board file), Armada 395 SoC platform and GP board Armada 390 DB development board - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x single-board computer, Technologic Systems TS-4900 and Engicam IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board - Qualcomm: LG Nexus 5 Phone - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288 Reload platform - ST Microelectronics STi: B2260 (96boards) single-board computer - TI Davinci: OMAP-L138 LCDK Development kit - TI OMAP: beagleboard-x15 rev B1 single-board computer" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits) ARM: dts: sony-nsz-gs7: add missing unit name to /memory node ARM: dts: chromecast: add missing unit name to /memory node ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node ARM: dts: berlin2: Add missing unit name to /soc node ARM: dts: berlin2cd: Add missing unit name to /soc node ARM: dts: berlin2q: Add missing unit name to /soc node ARM: dts: berlin2: Remove skeleton.dtsi inclusion ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion ARM: dts: berlin2q: Remove skeleton.dtsi inclusion arm: dts: berlin2q: enable all wdt nodes unconditionally arm: dts: berlin2: enable all wdt nodes unconditionally ARM: dts: omap5-igep0050.dts: Use tabs for indentation ARM: dts: Fix igepv5 power button GPIO direction ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ...
2016-10-05Merge tag 'v4.8' into patchworkMauro Carvalho Chehab1-4/+6
Linux 4.8 * tag 'v4.8': (1761 commits) Linux 4.8 ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() MAINTAINERS: Switch to kernel.org email address for Javi Merino x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() x86/init: Fix cr4_init_shadow() on CR4-less machines MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS ...
2016-09-19[media] add stih-cec driver into DTBenjamin Gaignard1-0/+12
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-14ARM: STi: DT: STiH407: Add uniperif reader dt nodesPeter Griffin1-0/+28
This patch adds the DT node for the uniperif reader IP block found on STiH407 family silicon. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14ARM: STi: DT: STiH407: Add uniperif player dt nodesPeter Griffin1-0/+80
This patch adds the DT nodes for the uniperif player IP blocks found on STiH407 family silicon. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14ARM: STi: DT: STiH407: Add sti-sasg-codec dt nodePeter Griffin1-0/+7
This patch adds the dt node for the internal audio codec IP. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14ARM: STi: DT: STiH407: Add FDMA driver dt nodes.Peter Griffin1-0/+52
These nodes are required to get the fdma driver working on STiH407 based silicon. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org>
2016-09-08ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCILee Jones1-4/+6
The STiH4{07,10} platform contains some interconnect clocks which are used by various IPs. If these clocks aren't handled correctly by ST's SDHCI driver MMC will break and the following output can be observed: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. Cc: stable@vger.kernel.org Tested-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2016-09-06ARM: dts: STiH407: Supply PWM Capture IRQLee Jones1-0/+1
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-02ARM: dts: STiH407-family: Add ports-implemented property in sata nodesPatrice Chotard1-0/+4
Despite ST AHCI version = 1.3, reading HOST_PORTS_IMPL returns 0. So force HOST_PORTS_IMPL to 1 by using ports-implemented DT property. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-02ARM: dts: STiH407: Move non-removable property to board filePatrice Chotard1-1/+0
Due to 96board which uses mmc0 node for SD card, the non-removable property must be moved from STiH407-family to board file for B2120 and B2199 boards. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
2016-06-18ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodesLee Jones1-0/+3
This patch fixes a non-booting issue in Mainline. When booting with a compressed kernel, we need to be careful how we populate memory close to DDR start. AUTO_ZRELADDR is enabled by default in multi-arch enabled configurations, which place some restrictions on where the kernel is placed and where it will be uncompressed to on boot. AUTO_ZRELADDR takes the decompressor code's start address and masks out the bottom 28 bits to obtain an address to uncompress the kernel to (thus a load address of 0x42000000 means that the kernel will be uncompressed to 0x40000000 i.e. DDR START on this platform). Even changing the load address to after the co-processor's shared memory won't render a booting platform, since the AUTO_ZRELADDR algorithm still ensures the kernel is uncompressed into memory shared with the first co-processor (0x40000000). Another option would be to move loading to 0x4A000000, since this will mean the decompressor will decompress the kernel to 0x48000000. However, this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of memory would essentially be wasted for no good reason. Until we can work with ST to find a suitable memory location to relocate co-processor shared memory, let's disable the shared memory nodes. This will ensure a working platform in the mean time. NB: The more observant of you will notice that we're leaving the DMU shared memory node enabled; this is because a) it is the only one in active use at the time of this writing and b) it is not affected by the current default behaviour which is causing issues. Fixes: fe135c6 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory) Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-26ARM: dts: STi: STih407: Switch LPC mode from RTC to ClocksourceLee Jones1-1/+1
This aligns with the internal configuration. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.