aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sun4i-a10.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-41/+170
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-04-03arch/arm/boot/dts/sun4i-a10.dtsi: convert to the new RTC compatiblesMaxime Ripard1-1/+1
Switch the device tree to the new compatibles introduced in the RTC drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-01Merge tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-1/+1
Pull char/misc driver patches from Greg KH: "Here's the big char/misc driver updates for 3.15-rc1. Lots of various things here, including the new mcb driver subsystem. All of these have been in linux-next for a while" * tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (118 commits) extcon: Move OF helper function to extcon core and change function name extcon: of: Remove unnecessary function call by using the name of device_node extcon: gpio: Use SIMPLE_DEV_PM_OPS macro extcon: palmas: Use SIMPLE_DEV_PM_OPS macro mei: don't use deprecated DEFINE_PCI_DEVICE_TABLE macro mei: amthif: fix checkpatch error mei: client.h fix checkpatch errors mei: use cl_dbg where appropriate mei: fix Unnecessary space after function pointer name mei: report consistently copy_from/to_user failures mei: drop pr_fmt macros mei: make me hw headers private to me hw. mei: fix memory leak of pending write cb objects mei: me: do not reset when less than expected data is received drivers: mcb: Fix build error discovered by 0-day bot cs5535-mfgpt: Simplify dependencies spmi: pm: drop bus-level PM suspend/resume routines spmi: pmic_arb: make selectable on ARCH_QCOM Drivers: hv: vmbus: Increase the limit on the number of pfns we can handle pch_phub: Report error writing MAC back to user ...
2014-04-01Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+1
Pull irq code updates from Thomas Gleixner: "The irq department proudly presents: - Another tree wide sweep of irq infrastructure abuse. Clear winner of the trainwreck engineering contest was: #include "../../../kernel/irq/settings.h" - Tree wide update of irq_set_affinity() callbacks which miss a cpu online check when picking a single cpu out of the affinity mask. - Tree wide consolidation of interrupt statistics. - Updates to the threaded interrupt infrastructure to allow explicit wakeup of the interrupt thread and a variant of synchronize_irq() which synchronizes only the hard interrupt handler. Both are needed to replace the homebrewn thread handling in the mmc/sdhci code. - New irq chip callbacks to allow proper support for GPIO based irqs. The GPIO based interrupts need to request/release GPIO resources from request/free_irq. - A few new ARM interrupt chips. No revolutionary new hardware, just differently wreckaged variations of the scheme. - Small improvments, cleanups and updates all over the place" I was hoping that that trainwreck engineering contest was a April Fools' joke. But no. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits) irqchip: sun7i/sun6i: Disable NMI before registering the handler ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller ARM: sun7i/sun6i: irqchip: Update the documentation ARM: sun7i/sun6i: dts: Add NMI irqchip support ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller genirq: Export symbol no_action() arm: omap: Fix typo in ams-delta-fiq.c m68k: atari: Fix the last kernel_stat.h fallout irqchip: sun4i: Simplify sun4i_irq_ack irqchip: sun4i: Use handle_fasteoi_irq for all interrupts genirq: procfs: Make smp_affinity values go+r softirq: Add linux/irq.h to make it compile again m68k: amiga: Add linux/irq.h to make it compile again irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0 irqchip: sun4i: Fix a comment about mask register initialization irqchip: sun4i: Fix irq 0 not working genirq: Add a new IRQCHIP_EOI_THREADED flag genirq: Document IRQCHIP_ONESHOT_SAFE flag ARM: sunxi: dt: Convert to the new irq controller compatibles irqchip: sunxi: Change compatibles ...
2014-04-01Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+1
Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
2014-03-17Merge tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux into next/dtArnd Bergmann1-1/+61
Pull "Allwinner DT additions for 3.15, take 2" from Maxime Ripard: - Two new boards: INet 97F Rev 02 and A10-OLinuXino-LIME - Addition of the I2C for the A31 - Addition USB Host mode for the A10, A10s, A13 and A20 - Addition of SATA support for the A10 and A20 - Change of compatible for the watchdog * tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux: (23 commits) ARM: sunxi: dt: Update the watchdog compatibles ARM: sun6i: colombus: Enable the I2C controllers ARM: sun6i: Enable the I2C muxing options ARM: sun6i: Enable the I2C controllers ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts ARM: sun7i: dt: Add USB host nodes to cubietruck dts ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-micro ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino ARM: sun4i: dt: Add USB host nodes to pcduino.dts ARM: sun4i: dt: Add USB host nodes to mini-xplus dts ARM: sun4i: dt: Add USB host nodes to hackberry dts ARM: sun4i: dt: Add USB host nodes to cubieboard dts ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts ARM: sun7i: dt: Add USB host bindings ARM: sun5i: dt: Add USB host bindings ARM: sun4i: dt: Add USB host bindings ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-14ARM: sunxi: dt: Convert to the new irq controller compatiblesMaxime Ripard1-1/+1
Switch the device tree to the new compatibles introduced in the irqchip drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-13ARM: sunxi: dt: Update the watchdog compatiblesMaxime Ripard1-1/+1
The watchdog compatibles were following a different pattern than the one found in the other devices. Now that the driver supports the right pattern, switch to it in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-11ARM: sunxi: dt: Convert to the new clocksource compatibleMaxime Ripard1-1/+1
Switch the device tree to the new compatibles introduced in the timer driver to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-09Merge tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux into next/dtOlof Johansson1-40/+109
Allwinner DT patches for 3.15, take 1 from Maxime Ripard: - Add SPI controllers for all the SoCs - Add various missing aliases - Add USB clocks nodes - Addition of the GMAC support - Introduction of the pcDuino board - A few DT cleanup patches: change of compatibles, * tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux: (33 commits) ARM: sun6i: dt: Fix mod0 compatible ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-micro ARM: dt: sun7i: Add SPI muxing options ARM: dt: sun5i: Add A13 SPI controller nodes ARM: dt: sun5i: Add A10s SPI controller nodes ARM: dt: sun4i: Add A10 SPI controller nodes ARM: dt: sun7i: Add A20 SPI controller nodes ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators ARM: sunxi: dt: Convert to the new clock compatibles ARM: sun7i: add arch timer node ARM: sun7i: dt: Add bindings for USB clocks ARM: sun5i: dt: Add bindings for USB clocks ARM: sun4i: dt: Add bindings for USB clocks ARM: dts: sun7i: Add ethernet alias for GMAC ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC ARM: dts: sun7i: cubietruck: Enable the GMAC ARM: dts: sun7i: Add pin muxing options for the GMAC ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-08Merge tag 'sunxi-fixes-for-3.14' of https://github.com/mripard/linux into fixesOlof Johansson1-1/+1
Allwinner fixes from Maxime Ripard: Two fixes for device trees additions that got added in 3.14. One fixes the interrupt types of some IPs, the other fixes up a compatible that got introduced during 3.14 * tag 'sunxi-fixes-for-3.14' of https://github.com/mripard/linux: ARM: sunxi: dt: Change the touchscreen compatibles ARM: sun7i: dt: Fix interrupt trigger types Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-04ARM: sun4i: dt: Add USB host bindingsRoman Byshko1-0/+52
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add ahci / sata supportOliver Schinagl1-0/+8
This patch adds sunxi sata support to A10 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dt: sun4i: Add A10 SPI controller nodesMaxime Ripard1-0/+44
The A10 has 4 SPI controllers that are now supported. Add them in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-18Merge 3.14-rc3 into char-misc-nextGreg Kroah-Hartman1-2/+2
We need the fixes here for future mei and other patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18ARM: sunxi: dt: Convert to the new clock compatiblesMaxime Ripard1-30/+30
Switch the device tree to the new compatibles introduced in the clock drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-18ARM: sun4i: dt: Add bindings for USB clocksRoman Byshko1-0/+9
Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-14ARM: sunxi: dt: Convert to the new SID compatiblesMaxime Ripard1-1/+1
Switch the device tree to the new compatibles introduced in the SID drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07ARM: sunxi: dt: Change the touchscreen compatiblesMaxime Ripard1-1/+1
Switch the device tree touchscreen compatibles to have a common pattern accross all Allwinner SoCs. Since the touchscreen driver has not been merged yet, it has no side effect. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-07ARM: dts: sun4i: rename clock node names to clk@NChen-Yu Tsai1-10/+20
Device tree naming conventions state that node names should match node function. Change fully functioning clock nodes to match and add clock-output-names to all sunxi clock nodes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-06ARM: sunxi: dt: Convert to the new net compatiblesMaxime Ripard1-2/+2
Switch the device tree to the new compatibles introduced in the ethernet and mdio drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-03ARM: sun4i: a10: Add missing serial aliasesMaxime Ripard1-0/+6
Some UART aliases have been defined, but not all of them. Add the remaining ones to be consistent and to ease the parsing of the DT by the bootloaders. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-01ARM: dts: sun4i: Add rtp controller nodeHans de Goede1-0/+6
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-29ARM: sun4i: dt: Move the aliases to the DTSIMaxime Ripard1-0/+2
The aliases are shared across boards are really belong to the DTSI. Move them there. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-29Merge tag 'sunxi-clk-3.14-for-maxime' of https://bitbucket.org/emiliolopez/linux into sunxi/dt-for-3.14Maxime Ripard1-2/+144
Allwinner sunXi SoCs DT changes for clocks This contains the DT parts of the "[PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support" series. It adds DT nodes for PLL4/5/6 and mod0 clocks on most sunxi platforms.
2013-12-28ARM: sun4i: dt: mod0 clocksEmilio López1-0/+120
This commit adds all the mod0 clocks present on sun4i to its device tree Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sunxi: add PLL5 and PLL6 supportEmilio López1-2/+17
This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i device trees. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sunxi: add PLL4 supportEmilio López1-0/+7
This commit adds the PLL4 definition to the sun4i, sun5i and sun7i device trees. PLL4 is compatible with PLL1. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-11-22ARM: sunxi: dt: add EMAC aliasesEmilio López1-0/+4
U-Boot uses the ethernet0 alias to locate the right node to fill in the MAC address of the first ethernet interface. This patch adds the alias on all the sunxi SoCs with EMAC. In this way, people using ethernet in U-Boot (eg, for tftp) can keep a consistent address on both U-Boot and Linux with no additional effort. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-11-22ARM: dts: sun4i/sun7i: add RTC nodeCarlo Caione1-0/+6
Add the RTC node to DTS for Allwinner A10 and Allwinner A20. Signed-off-by: Carlo Caione <carlo.caione@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-16ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7iOliver Schinagl1-0/+5
This patch shall add support for the sunxi-sid driver to the device tree for A10, A10s, A13 and A20. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-10ARM: sun4i: dt: Fix A10 SoC bus base addressMaxime Ripard1-1/+1
There was a typo in the base address used for the soc node in the A10 device tree. Fix it with the proper base address. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-10ARM: sun4i: a10: Remove useless simple-bus reg propertyMaxime Ripard1-1/+0
The reg property of the simple-bus driver is completely useless. Remove it from the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+27
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-06-20Merge tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux into next/dtArnd Bergmann1-0/+48
From Maxime Ripard: Allwinner SoCs DT additions for 3.11, part 2 Mostly adds support for the i2c controllers and the Allwinner A10S SoC. * tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux: ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree ARM: sunxi: dt: Add Allwinner A10s DTSI ARM: sun4i: cubieboard: Enable the i2c controllers ARM: sun5i: olinuxino: Enable the i2c controllers ARM: sun5i: dt: Add i2c muxing options ARM: sun4i: dt: Add i2c muxing options ARM: sunxi: dt: Add i2c controller nodes to the DTSI Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-15ARM: sun4i: dt: Add i2c muxing optionsMaxime Ripard1-0/+21
The i2c controller found on the Allwinner A10 has only one muxing option available for each controller. Add them to the dtsi Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
2013-06-15ARM: sunxi: dt: Add i2c controller nodes to the DTSIMaxime Ripard1-0/+27
The Allwinner A10 and A13 both have 3 i2c controller embedded. Add those to the common sunxi dtsi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
2013-06-14Merge tag 'sunxi-dt-for-3.11' of git://github.com/mripard/linux into next/dtOlof Johansson1-0/+2
From Maxime Ripard: Allwinner SoCs DT additions for 3.11 - Switch to using the sun5i clocks for the A13 - Register the pio node as an interrupt controller * tag 'sunxi-dt-for-3.11' of git://github.com/mripard/linux: ARM: sunxi: dt: Register the pio node as interrupt controller ARM: sun5i: Update the clock compatible strings Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-10ARM: sunxi: dt: Register the pio node as interrupt controllerMaxime Ripard1-0/+2
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-10ARM: dts: add missing cpu #address-cell valuesArnd Bergmann1-0/+2
A recent series has added CPU numbers to a lot of dts files, but unfortunately in a few cases the #address-cells and #size-cells values are missing, which causes build warnings. This adds the missing ones for sunxi and sama5 that I found through build testing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2013-05-31ARM: sunxi: Add EMAC controller node to sun4i DTSIMaxime Ripard1-0/+16
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31ARM: sun4i: Add muxing options for the ethernet controllerMaxime Ripard1-0/+11
The EMAC only has one pinset available for muxing, so hopefully, we cover all cases. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23ARM: dts: sunxi: cpus/cpu nodes dts updatesLorenzo Pieralisi1-0/+2
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-15ARM: sunxi: unify osc24M_fixed and osc24MEmilio López1-7/+1
Now that the clock driver supports the gatable oscillator as one single clock, drop osc24M_fixed and move the relevant properties to osc24M Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Update watchdog compatible stringMaxime Ripard1-1/+1
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Update interrupt controller compatible stringMaxime Ripard1-1/+1
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Update timer compatible stringMaxime Ripard1-1/+1
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Reorganize the dtsiMaxime Ripard1-2/+192
In the early days, the A10 and A13 shared quite some code. Nowadays it shares less and less code, the A31 diverging even more, so it doesn't make much sense to continue to maintain this structure, just use one DTSI for every SoC, and that's it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-04arm: sunxi: Add clock to pinctrl nodeEmilio López1-0/+1
The port controller needs the apb0_pio clock enabled to be able to work. This commit declares that on the device tree. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-04arm: sunxi: use the right clock phandles for UARTsEmilio López1-6/+6
All the UARTs are connected to clock gates; now that our clock driver is able to handle them, make the switch. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.