aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-05-11ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodesHans de Goede1-0/+2
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04ARM: dts: sun7i: Enable mmc controller on various A20 boardsHans de Goede1-0/+25
The cd pin settings have been taken from the original firmware fex files, and have been confirmed to work on the actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dtsZalan Blenessy1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add ahci / sata supportHans de Goede1-0/+10
This patch adds sunxi sata support to A20 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-microMaxime Ripard1-0/+17
The A20-Olinuxino-micro has two SPI bus exposed on its UEXT connectors, enable them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMACChen-Yu Tsai1-15/+12
GMAC has better performance and fewer hardware issues. Use the GMAC in MII mode for ethernet instead of the EMAC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-18ARM: sun7i: olinuxino-micro: Enable the I2C controllersMaxime Ripard1-0/+18
The A20-olinuxino-micro uses the first three I2C controllers found on the A20. Enable them in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-12ARM: dts: sun7i: olinuxino-micro: Enable the EMACMaxime Ripard1-0/+15
The A20-olinuxino-micro has the EMAC wired in. Enable it in the DT so that we can use it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-22ARM: sun7i: a20-olinuxino: Enable the user LEDMaxime Ripard1-0/+21
The A20-olinuxino Micro has a LED connected to the PH2 pin. Use the gpio-led driver to enable the control over this LED. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-22ARM: sun7i: a20-olinuxino: Enable UARTs muxingMaxime Ripard1-0/+6
Instead of relying on the bootloader to mux the UART pins properly, do it on our own and register the rightful pins for the A20-olinuxino in the DT using pinctrl. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-20ARM: sun7i: Add Olimex A20-Olinuxino-Micro supportMaxime Ripard1-0/+34
The Olimex A20-Olinuxino is an open-hardware board based on the Allwinner A20 SoC, with most of the pins exported on headers, a 10/100M ethernet port, SATA, SD and uSD slots, etc. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.