aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/tegra124-apalis-eval.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-26ARM: tegra: apalis-tk1: drop unused hdmi_ddc labelMarcel Ziswiler1-1/+1
Drop unused hdmi_ddc label. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: apalis-tk1: replace underscores in node names with dashesMarcel Ziswiler1-1/+1
As underscores in node names are not recommended replace them all where possible with dashes. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: apalis-tk1: drop obsolete spidev nodesMarcel Ziswiler1-12/+0
Drop obsolete spidev device tree nodes as nowadays one should do this by binding the spidev driver to specific instances/chip selects at runtime. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: apalis-tk1: reorder SD card propertiesMarcel Ziswiler1-2/+2
Reorder SD card properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: apalis-tk1: reorder backlight propertiesMarcel Ziswiler1-1/+1
Reorder backlight properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: apalis-tk1: add missing regulatorsMarcel Ziswiler1-0/+18
Add missing regulators: - reg_module_3v3_audio being VDDA supply of SGTL5000 - VDDD supply of SGTL5000 actually being reg_1v8_vio - TMP451 temperature sensor vcc supply being reg_module_3v3 - usb3-0 vbus supply being reg_usbh_vbus - usb3-1 vbus supply being reg_usbo1_vbus - carrier board HDMI supply being reg_5v0 - carrier board sata target 5v supply being reg_5v0 - carrier board sata target 12v supply being reg_12v0 - carrier board reg_3v3 actually being backlight power supply Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08ARM: tegra: apalis-tk1: Copyright period, spurious newlinesMarcel Ziswiler1-4/+2
Update the copyright period and get rid of some spurious newlines. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOsMarcel Ziswiler1-0/+10
The Apalis TK1 module uses some dedicated GPIOs as I210 gigabit Ethernet controller reset and to control RESET_MOCI aka reset module output carrier input on MXM3 pin 26. The Apalis Evaluation Board furthermore uses Apalis GPIO7 on MXM3 pin 15 as reset signal for its PLX PEX 8605 PCIe Switch. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08ARM: tegra: apalis/colibri: Use correct compatible for RTCMarcel Ziswiler1-1/+1
All Toradex Carrier Boards use a st,m41t0 compatible RTC. Compared to a st,m41t00 this RTC has also an oscillator fail bit which allows to detect when the RTC lost track of time. Similar to commit c53bec16b150 ("ARM: dts: colibri/apalis: use correct compatible for RTC") covering our NXP i.MX and Vybrid based modules. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08ARM: tegra: Fix I2C bus frequencies on Apalis/ColibriMarcel Ziswiler1-3/+2
Use a faster speed of 400 kbit/s for regular I2C busses. Use a slower speed of 10 kbit/s for DDC/EDID to improve reliability. Use a slower speed of 100 kbit/s for power I2C to be within specs of the LM95245 temperature sensor. While at it further annotate I2C pin usage. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-06-13ARM: dts: tegra: fix PCI bus dtc warningsRob Herring1-1/+1
dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HWMarcel Ziswiler1-8/+2
Add SD card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-07-11ARM: tegra: Initial support for Apalis TK1Marcel Ziswiler1-0/+284
This patch adds the device tree to support Toradex Apalis TK1 a computer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the module's device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.