aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/zynq-zc706.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-16ARM: zynq: Fix W=1 dtc 1.4 warningsMichal Simek1-1/+1
The patch removes these warnings reported by dtc 1.4: Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Julia Cartwright <julia@ni.com> Series-to: arm-soc
2016-02-25ARM: zynq: Use earlycon instead of earlyprintkMichal Simek1-1/+1
Use early console instead of earlyprintk which is supposed to use for very early debugging (DEBUG_LL). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-28ARM: dts: zynq: Fix stdout-path and bootargsMichal Simek1-1/+2
parallella - Remove linux,stdout-path. Use stdout-path to identify kernel console Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-01-28ARM: zynq: DT: Add aliases nodeMichal Simek1-0/+6
Add aliases node to DTs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28ARM: zynq: DT: Add pinctrl information to USB nodesSoren Brinkmann1-0/+26
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-12ARM: zynq: DT: Add pinctrl informationSoren Brinkmann1-0/+152
Add pinctrl descriptions to the zc702 and zc706 device trees. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-08ARM: zynq: DT: Add USB to device treeSoren Brinkmann1-0/+10
Add USB nodes to zc702, zc706 and zed device trees. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-12-01arm: dts: zynq: Move crystal freq. to board levelPeter Crosthwaite1-0/+4
The fact that all supported boards use the same 33MHz crystal is a co-incidence. The Zynq PS support a range of crystal freqs so the hardcoded setting should be removed from the dtsi. Re-implement it on the board level. This prepares support for Zynq boards with different crystal frequencies (e.g. the Digilent ZYBO). Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-16ARM: zynq: DT: Add Ethernet physSoren Brinkmann1-0/+5
Add missing Ethernet phys to Zynq DTs. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-01ARM: zynq: DT: Use 0x prefix for memory nodesMichal Simek1-1/+1
Be align with the rest of zynq DTS and have 0 written as 0x0. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-01ARM: zynq: DT: Update years in headerMichal Simek1-2/+1
Add this year to the header. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-01ARM: zynq: DT: Fix Ethernet phy modesSoren Brinkmann1-1/+1
The used PHYs should be qualified as 'rgmii-id' instead of just 'rgmii'. For the Zed board this seems to make a difference between working and broken Ethernet. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-22ARM: zynq: dt: Add I2C nodes to Zynq device treeSoren Brinkmann1-0/+68
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-31ARM: dts: zynq: Add SDHCI nodesSoren Brinkmann1-0/+4
Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-12ARM: zynq: add gem supportSteffen Trumtrar1-0/+5
The zynq includes a Cadence GEM IP core. This is compatible with the macb driver. Add it to the zynq-7000 DT. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Josh Cartwright <josh.cartwright@ni.com> [soren: rebased to current Linus tree, added zc706 + zed support, moved phy-mode property to board level dtses] Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17arm: dt: zynq: Add support for the zc706 platformSoren Brinkmann1-0/+35
Add a DT fragment for the zc706 Zynq platform and a corresponding target to the Makefile. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.