aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller56-133/+360
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05ARM: dts: am4372: Add clock names for cpsw and cptsGeorge Cherian1-0/+2
Add CPSW fck and CPTS clock and clock names for AM4372 Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05ARM: dts: am33xx: Add clock names for cpsw and cptsGeorge Cherian1-0/+2
Add CPSW fck and CPTS clock and clock names Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-28Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds4-14/+14
Pull devicetree bug fixes from Grant Likely: "These are some important bug fixes that need to get into v3.15. This branch contains a pair of important bug fixes for the DT code: - Fix some incorrect binding property names before they enter common usage - Fix bug where some platform devices will be unable to get their interrupt number when they depend on an interrupt controller that is not available at device creation time. This is a problem causing mainline to fail on a number of ARM platforms" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of/irq: do irq resolution in platform_get_irq of: selftest: add deferred probe interrupt test dt: Fix binding typos in clock-names and interrupt-names
2014-04-25Merge tag 'zynq-dt-fixes-for-3.15' of git://git.xilinx.com/linux-xlnx into fixesArnd Bergmann3-0/+167
arm: Xilinx Zynq DT fixes for v3.15 - Enable Zynq I2c - Fix cpufreq DT binding * tag 'zynq-dt-fixes-for-3.15' of git://git.xilinx.com/linux-xlnx: ARM: zynq: dt: Add I2C nodes to Zynq device tree ARM: zynq: DT: Add 'clock-latency' property Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'vexpress/fixes-for-3.15' of git://git.linaro.org/people/pawel.moll/linux into fixesArnd Bergmann1-1/+1
ARM Versatile Express fixes for 3.15 This series contains straight-forward fixes for different Versatile Express infrastructure drivers: - NULL pointer dereference on the error path in the clk driver - out of boundary array access in the dcscb driver - broken restart/power off implementation - mis-interpreted voltage unit in the spc driver * tag 'vexpress/fixes-for-3.15' of git://git.linaro.org/people/pawel.moll/linux: ARM: vexpress/TC2: Convert OPP voltage to uV before storing power/reset: vexpress: Fix restart/power off operation arm/mach-vexpress: array accessed out of bounds clk: vexpress: NULL dereference on error path Includes an update to 3.15-rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: tegra: remove UART5/UARTE from tegra124.dtsiStephen Warren1-13/+0
Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth UART, but this appears to be left-over from earlier SoC documentation. Remove the non-existent DT node for UART5. Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'omap-for-v3.15/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixesArnd Bergmann14-24/+44
Fixes for omaps, mostly to fix some GPMC, DSS and USB issues for device tree based booting. And turns out BeagleBoard xM A/B needs it's own minimal dts in addition to the related u-boot changes. Also few minor documentation and typo fixes are merged to get them out of the way. * tag 'omap-for-v3.15/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix GPMC remap for devices using an offset ARM: OMAP2+: Fix oops for GPMC free ARM: dts: Add support for the BeagleBoard xM A/B ARM: dts: Grammar /that will/it will/ ARM: dts: Grammar /is uses/ is used/ ARM: OMAP2+: Fix config name for USB3 PHY ARM: dts: am335x: update USB DT references ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand ARM: AM335X: EVM: fix pinmux documentation in devicetree ARM: OMAP2+: N900: remove omapdss init for DT boot ARM: dts: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shift ARM: dts: omap5: Add clocks to USB3 PHY node ARM: OMAP2+: hwmod: fix missing braces in _init() ARM: AM43xx: fix dpll init in bypass mode ARM: OMAP3: hwmod data: Correct clock domains for USB modules ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'renesas-fixes-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixesArnd Bergmann3-5/+3
Renesas ARM Based SoC Fixes Updates for v3.15 r8a7791 (R-Car M2) based koelsch board * Correct renesas,gpios to renesas,groups in sd[012] pfc 8a7790 (R-Car H2) based lager board * Correct SND_SOC_DAIFMT_CBx_CFx flags r8a7740 (R-Mobile A1) SoC * Drop address cells from GIC node r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Correct SND_SOC_DAIFMT_CBx_CFx flags sh73a0 (SH-Mobile AG5) SoC * Drop address cells from GIC node * tag 'renesas-fixes-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfc ARM: shmobile: r8a7740: drop address cells from GIC node ARM: shmobile: sh73a0: drop address cells from GIC node ARM: shmobile: armadillo800eva: fixup SND_SOC_DAIFMT_CBx_CFx flags ARM: shmobile: lager: fixup SND_SOC_DAIFMT_CBx_CFx flags Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'renesas-dt5-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixesArnd Bergmann1-2/+2
Fifth Round of Renesas ARM Based SoC DT Updates for v3.15 Correct renesas,groups in SDHI nodes of for r8a7790 (R-Car H2) based Lager board. * tag 'renesas-dt5-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: correct renesas,gpios to renesas,groups in sd[02] pfc Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'v3.15-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixesArnd Bergmann1-4/+4
Fixing uart-rx pull settings and a copy'n'paste error in a smp message * tag 'v3.15-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: fix copy'n'paste error in smp error messages ARM: rockchip: rk3188: enable pull-ups on UART RX pins Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'imx-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixesArnd Bergmann18-50/+104
The i.MX fixes for 3.15: - A couple of dts changes for the fallout of imx-drm binding update - Parent DI clocks to video PLL for better HDMI support - PCIe interrupt mapping and GIC node fixes - A series of edmqmx6 board fixes - Other small and random fixes on imx5 and imx6 dts * tag 'imx-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: i.MX6: ipu_di_sel clocks can set parent rates ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel ARM: dts: imx: add required #clock-cells for fixed-clock ARM: dts: vybrid: drop address and size cells from GIC node ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 ARM: dts: imx53: fix apparent copy/paste error ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property ARM: dts: imx53-tx53: add IPU DI ports and endpoints ARM: dts: imx6: edmqmx6: add second STMPE ARM: dts: imx6: edmqmx6: USB H1 only supports host mode ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator ARM: dts: imx6: edmqmx6: Fix usbotg id pin ARM: dt: microsom: don't set bit 7 for ethernet mux settings ARM: imx6q-clk: parent lvds_gate from lvds_sel ARM: dts: imx: drop invalid size and address cells properties ARM: dts: mx5: fix wrong stmpe-ts bindings ARM: dts: imx53-m53evk: Fix memory region description ARM: dts: imx53-qsb-common: Fix memory region description ARM: dts: imx6: add PCIe interrupt mapping properties Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'mvebu-dt-fixes-non-crit-3.15' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann12-11/+13
mvebu DT fixes-non-critical (for v3.15-rc1) - kirkwood - add some missing vendor prefixes to keep checkpatch happy - mvebu - add clock ref to mdio node on 370/XP/38x * tag 'mvebu-dt-fixes-non-crit-3.15' of git://git.infradead.org/linux-mvebu: ARM: mvebu: ensure the mdio node has a clock reference on Armada 38x ARM: mvebu: ensure the mdio node has a clock reference on Armada 370/XP ARM: Kirkwood: DT: Add missing vendor prefix ARM: Kirkwood: Fix Atmel vendor prefix Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: Tidy up DTB Makefile entriesDomenico Andreoli1-10/+9
Few things were out of order: - removed ARCH_BCM2835 duplicate - shuffled ARCH_BCM_5301X, ARCH_U8500 and ARCH_U300 around so to keep the list sorted Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Signed-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-23net: via-rhine: add OF bus bindingAlexey Charkov3-0/+18
This should make the driver usable with VIA/WonderMedia ARM-based Systems-on-Chip integrated Rhine III adapters. Note that these are always in MMIO mode, and don't have any known EEPROM. Signed-off-by: Alexey Charkov <alchark@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23dt: Fix binding typos in clock-names and interrupt-namesGeert Uytterhoeven4-14/+14
s/interrupts-names/interrupt-names/g s/clocks-names/clock-names/g Some of the binding files and device tree files get this wrong and the kernel won't be able to pick it up. Fix them up now so that they don't get widely used. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by : Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-22ARM: zynq: dt: Add I2C nodes to Zynq device treeSoren Brinkmann3-0/+166
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-22ARM: zynq: DT: Add 'clock-latency' propertySoren Brinkmann1-0/+1
Specify the 'clock-latency' property to avoid certain cpufreq governors from refusing to work with the following error: ondemand governor failed, too long transition latency of HW, fallback to performance governor Reported-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-18ARM: dts: Add support for the BeagleBoard xM A/BRobert Nelson2-0/+17
BeagleBoard xM A/B has an inverted usb hub enable line vs the xM C Signed-off-by: Robert Nelson <robertcnelson@gmail.com> [tony@atomide.com: updated for missing bracket] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18Shiraz has movedViresh Kumar1-1/+1
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18ARM: dts: Grammar /that will/it will/Geert Uytterhoeven5-6/+6
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: dts: Grammar /is uses/ is used/Geert Uytterhoeven4-4/+4
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: dts: am335x: update USB DT referencesLeigh Brown4-8/+8
In "ARM: dts: am33xx: correcting dt node unit address for usb", the usb_ctrl_mod and cppi41dma nodes were updated with the correct register addresses. However, the dts files that reference these nodes were not updated, and those devices are no longer being enabled. This patch corrects the references for the affected dts files. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nandJohan Hovold3-3/+0
Remove all remaining uses of gpmc,device-nand that have been added since the property was removed by commit f40739faba8e ("ARM: dts: OMAP2+: Simplify NAND support"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: AM335X: EVM: fix pinmux documentation in devicetreeWolfram Sang1-2/+2
Wrong documentation in pinmux description can be especially confusing. Keep it proper. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: dts: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shiftPeter Ujfalusi1-1/+1
The correct bit is 24 for AHCLKX. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: dts: omap5: Add clocks to USB3 PHY nodeRoger Quadros1-0/+6
The USB3 PHY driver (ti-pipe3) was updated so that the relevant clock phandles are expected in the DT node. Provide the necessary clocks. Reported-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-15ARM: rockchip: rk3188: enable pull-ups on UART RX pinsMax Schwarz1-4/+4
The default behaviour of the uart-rx pins on the rk3188 is to be pulled up and a lot of designs use diodes to even prevent them from being raised from the outside. Therefore change the rx-pin settings accordingly. This also fixes a uart receive problem on mass production Radxa Rock boards. Signed-off-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-04-15ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfcMagnus Damm1-3/+3
Fix typo of renesas,groups in the koeslch dt. The kernel has no renesas,gpios but this should match renesas,groups. Noticed thanks to similar fix for Lager by Rob Taylor and Ben Dooks. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-15ARM: shmobile: r8a7740: drop address cells from GIC nodeLucas Stach1-1/+0
This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-15ARM: shmobile: sh73a0: drop address cells from GIC nodeLucas Stach1-1/+0
This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: dts: imx: add required #clock-cells for fixed-clockShawn Guo10-0/+24
Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: vybrid: drop address and size cells from GIC nodeLucas Stach1-2/+0
This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11Fabio Estevam1-0/+1
In case the bootloader has incorrectly configured the ALT mode of MX6SL_PAD_ECSPI1_SS0 pad, we end up with the following probe error: m25p80 spi0.0: found mr25h256, expected m25p32 m25p80 spi0.0: mr25h256 (32 Kbytes) In order to avoid this issue, add an entry for MX6SL_PAD_ECSPI1_SS0 pad, so that kernel configures the ECSPI chip select as GPIO functionality, which results in correct SPI NOR probe. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx53: fix apparent copy/paste errorLothar Waßmann1-1/+1
The 'remote-endpoint' property should point back to ipu_di1_lvds1 rather than ipu_di0_lvds0. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' propertyShawn Guo2-6/+0
Since commit (655b43c staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs), 'crtcs' becomes a dead property. Remove it. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
2014-04-14ARM: dts: imx53-tx53: add IPU DI ports and endpointsShawn Guo1-1/+10
With the recent imx-drm device tree binding changes, we need to add IPU DI ports and endpoints for adapting. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
2014-04-14ARM: dts: imx6: edmqmx6: add second STMPELucas Stach1-9/+29
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: edmqmx6: USB H1 only supports host modeLucas Stach1-0/+1
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulatorSascha Hauer1-3/+4
GPIO7_12 switches the D+/D- USB lines on and off. When we use this as VBUS regulator it means that USB device mode can never work as VBUS is never turned on in Device mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: edmqmx6: Fix usbotg id pinLucas Stach1-1/+1
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dt: microsom: don't set bit 7 for ethernet mux settingsRussell King1-11/+11
Bit 6,7 are marked as reserved for the ethernet RGMII pins, so avoid setting these bits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx: drop invalid size and address cells propertiesLucas Stach2-4/+0
Those two properties should have been set to zero, which is the same as not specifying them. Having address-cells set to 1 causes OF interrupt mapping routines to add 1 to the interrupt-cells property and as result fail because all calculations are off by one. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: mx5: fix wrong stmpe-ts bindingsStefan Agner1-10/+10
Fix bindings for STMPE touchscreen controller to match the documented bindings and the actual bindings used by the driver. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx53-m53evk: Fix memory region descriptionFabio Estevam1-1/+2
On m53evk there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx53-qsb-common: Fix memory region descriptionFabio Estevam1-1/+2
On mx53qsb there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6: add PCIe interrupt mapping propertiesLucas Stach1-0/+8
As defined by the common PCI bindings. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-04-10Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-0/+4
Pull slave-dmaengine updates from Vinod Koul: - New driver for Qcom bam dma - New driver for RCAR peri-peri - New driver for FSL eDMA - Various odd fixes and updates thru the subsystem * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) dmaengine: add Qualcomm BAM dma driver shdma: add R-Car Audio DMAC peri peri driver dmaengine: sirf: enable generic dt binding for dma channels dma: omap-dma: Implement device_slave_caps callback dmaengine: qcom_bam_dma: Add device tree binding dma: dw: Add suspend and resume handling for PCI mode DW_DMAC. dma: dw: allocate memory in two stages in probe Add new line to test result strings produced in verbose mode dmaengine: pch_dma: use tasklet_kill in teardown dmaengine: at_hdmac: use tasklet_kill in teardown dma: cppi41: start tear down only if channel is busy usb: musb: musb_cppi41: Dont reprogram DMA if tear down is initiated dmaengine: s3c24xx-dma: make phy->irq signed for error handling dma: imx-dma: Add missing module owner field dma: imx-dma: Replace printk with dev_* dma: fsl-edma: fix static checker warning of NULL dereference dma: Remove comment about embedding dma_slave_config into custom structs dma: mmp_tdma: move to generic device tree binding dma: mmp_pdma: add IRQF_SHARED when request irq dma: edma: Fix memory leak in edma_prep_dma_cyclic() ...
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds6-0/+108
Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-04-08Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds4-0/+209
Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.