aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-06-12Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dtOlof Johansson9-33/+19
Gemini device tree updates for the v5.14 kernel: - MAINTAINERS fix for the DTS files - Drop a duplicate ethernet node on the RUT1xx DTS - Add device_type to the PCI node - Fix up some DTS syntax so it agrees with the schemas merged for the v5.14 merge window * tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: remove xxx-cells from display ARM: dts: gemini-dlink-dir-685: Remove address from display port ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c ARM: dts: gemini: convert obsolete SPI properties ARM: dts: gemini: use the right rtc compatible ARM: dts: gemini: add device_type on pci ARM: dts: gemini-rut1xx: remove duplicate ethernet node ARM: dts: gemini: rename mdio to the right name MAINTAINERS: gemini: add missing dts pattern Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dtOlof Johansson6-26/+278
IXP4xx DTS updates for the v5.14 kernel: - Add ethernet to the boards - Add PCI hosts to the boards - Create an expansion bus around the flash memory - Add the beeper to NSLU2 completing the NSLU2 DTS * tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up the IXP4xx ethernet nodes ARM: dts: ixp4xx: Add beeper to the NSLU2 ARM: dts: ixp4xx: Create a proper expansion bus ARM: dts: ixp4xx: Add PCI hosts ARM: dts: ixp4xx: Add ethernet Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: dts: add intel-ixp42x-welltech-epbx100Corentin Labbe2-0/+77
This patch adds devicetree for intel-ixp42x-welltech-epbx100. Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: dts: imx6: Add GE B1x5v2Sebastian Reichel9-0/+1244
This adds device tree files for the General Electric Healthcare (GEHC) B1x5v2 series. All models make use of Congatec's QMX6 system on module, which is described in its own device tree include, so that it can also be used by other boards. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Add ethernet VIO regulatorChristoph Niedermaier1-0/+18
Add VIO regulator that supplies multiple ethernet magnetics and currently there is no upstream support for that in the networking, so just keep the regulator enabled always to emulate what other boards, which have this hard-wired, do. Until there is support. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtcChristoph Niedermaier1-1/+11
Add aliases for i2c and serial to match the order of the DHCOM standard [1]. Also add aliases for the two rtcs. The i2c rtc is the primary one. [1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recoveryChristoph Niedermaier1-3/+33
The i2c bus can freeze at the end of transaction so the bus can no longer work. This scenario is improved by adding scl/sda gpios definitions to implement the i2c bus recovery mechanism. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problemsChristoph Niedermaier1-0/+1
To make the ethernet cable plugin detection reliable the power detection of the smsc phy has been disabled. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Fix ethernet reset time propertiesChristoph Niedermaier1-2/+2
Fix ethernet reset time properties as described in Documentation/devicetree/bindings/net/ethernet-phy.yaml Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-11ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shemaAswath Govindraju1-2/+2
ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: b0b039515445 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shemaAswath Govindraju1-1/+1
ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: 444d66fafab8 ("ARM: dts: add spi wifi support to cm-t335") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: dra7x-evm: Drop "ti,pcf8575"Geert Uytterhoeven3-8/+8
The TI part is equivalent to the NXP part and its compatible value is not documented in the DT bindings. All other users of similar I2C GPIO expanders just use the compatible values of the original NXP parts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: am33xx: Drop interrupt property from ecap nodesLokesh Vutla1-6/+0
Interrupts were never supported by ecap driver and the bindings were never documented.Therefore drop the entries in preparation to moving bindings to YAML schema. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: ti: Fix node name for all ecap dt nodesLokesh Vutla7-15/+15
dtbs_check produces the following warning for ecap node name: ecap@100: $nodename:0: 'ecap@100' does not match '^pwm(@.*|-[0-9a-f])*$' Fix this by replacing ecap with pwm in node name Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodesLokesh Vutla3-18/+9
ti,am33xx-ecap is used to represent device nodes using ti,hwmod data. Now that hwmod entries are entirely removed, drop usage of ti,am33xx-ecap compatible from all DT nodes. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: ti: drop usage of redundant compatibleLokesh Vutla3-22/+11
Commit 229110c1aa691 ("ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings") added ti,am3352-ehrpwm compatible which is similar to ti,am33xx-ehrpwm but without out t,hwmod properties. But with commit 58bfbea5b1c68 ("ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes") dropped support for all ti,hwmod for ehrpwm, but missed deprecating ti,am33xx-ehrpwm compatible. So drop ti,am33xx-ehrpwm from DT as it is no longer needed. ti-ehrpwn driver still support ti,am33xx-ehrpwm in order to maintain backward compatibility. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: omap2/3: Drop dmas property from I2C nodeVignesh Raghavendra3-14/+0
DMA was never supported by i2c-omap driver and the bindings were never documented. Therefore drop the entries in preparation to moving bindings to YAML schema. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: dra7: Fix duplicate USB4 target module nodeGowtham Tammana5-78/+50
With [1] USB4 target-module node got defined in dra74x.dtsi file. However, the earlier definition in [2] was not removed, and this duplication of the target module is causing boot failure on dra74 variant boards - dra7-evm, dra76-evm. USB4 is only present in DRA74x variants, so keeping the entry in dra74x.dtsi and removing it from the top level interconnect hierarchy dra7-l4.dtsi file. This change makes the USB4 target module no longer visible to AM5718, DRA71x and DRA72x so removing references to it in their respective dts files. [1]: commit c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") [2]: commit 549fce068a311 ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data") Fixes: c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") Signed-off-by: Gowtham Tammana <g-tammana@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-10ARM: dts: stm32: fix stpmic node for stm32mp1 boardsAlexandre Torgue4-18/+6
On some STM32 MP15 boards, stpmic node is not correct which generates warnings running "make dtbs_check W=1" command. Issues are: -"regulator-active-discharge" is not a boolean but an uint32. -"regulator-over-current-protection" is not a valid entry for vref_ddr. -LDO4 has a fixed voltage (3v3) so min/max entries are not allowed. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoMMarek Vasut2-2/+2
Fix the following dtbs_check warning: spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoMMarek Vasut1-1/+1
Fix the following dtbs_check warning: eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoMMarek Vasut1-1/+0
Fix the following dtbs_check warning: touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supplyGrzegorz Szymaszek1-1/+1
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC supply set to v3v3 (buck4), the same as the VMMC supply. That was incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3) instead. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: add a new DCMI pins group on stm32mp15Grzegorz Szymaszek1-0/+33
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was incompatible with the pins used on the Odyssey board, where: - there are 8 data pins instead of 12, - DCMI_HSYNC is available at PA4 instead of PH8, - DCMI_D0 is at PC6 instead of PH9, - DCMI_D3 is at PE1 instead of PH12, - DCMI_D4 is at PE11 instead of PH14, - DCMI_D5 is at PD3 instead of PI4, - DCMI_D6 is at PE13 instead of PB8, - DCMI_D7 is at PB9 instead of PE6. Add the DCMI pins used on the Odyssey board as a new DCMI pin state definition, dcmi-1, AKA phandle dcmi_pins_b. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7Alexandre Torgue1-1/+1
It prevents the following warning: pin-controller@50002000: 'ltdc' does not match any of the regexes: '-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+' Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15Alexandre Torgue1-6/+6
It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warningsAlexandre Torgue1-2/+2
Replace upper case by lower case in i2c nodes name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warningsAlexandre Torgue4-79/+71
Update node name to avoid a DT schema validation issue seen with "make dtbs_check W=1". It also cleans picntrl dtsi files for f429/f469 MCU. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: rockchip: fix supply properties in io-domains nodesJohan Jonker2-3/+3
A test with rockchip-io-domain.yaml gives notifications for supply properties in io-domains nodes. Fix them all into ".*-supply$" format. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-09Merge tag 'tags/bcm2835-dt-next-2021-06-08-v2' into devicetree/nextFlorian Fainelli22-96/+156
- Fixup MMC node names - Fixup led node names - Introduce new devicetree file for Raspberry Pi 400 - Introduce devicetree bindings for Raspberry Pi 400 - Fix issue with dwc2's FIFO's size - Add VEC compatible for bcm2711 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-06-08ARM: dts: am43xx-clocks: add spread spectrum supportDario Binacchi1-6/+6
Registers for adjusting the spread spectrum clocking (SSC) have been added. As reported by the TI spruhl7x RM, SSC is supported only for LCD and MPU PLLs, but the PRCM_CM_SSC_DELTAMSTEP_DPLL_XXX and PRCM_CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field in the PRCM_CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE, MPU, DDR, PER, DISP, EXTDEV). Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210606202253.31649-5-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08ARM: dts: am33xx-clocks: add spread spectrum supportDario Binacchi1-5/+5
Registers for adjusting the spread spectrum clocking (SSC) have been added. As reported by the TI spruh73x RM, SSC is supported only for LCD and MPU PLLs, but the CM_SSC_DELTAMSTEP_DPLL_XXX and CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field in the CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE, MPU, DDR, PER, DISP). Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210606202253.31649-4-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08ARM: dts: Add Raspberry Pi 400 supportStefan Wahren2-0/+46
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there are some minor differences: - higher CPU clock rate (1.8 GHz) - different Wifi chip (BCM43456) - power off is now handled via GPIO - no ACT LED Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-7-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08ARM: dts: bcm283x: Fix up GPIO LED node namesStefan Wahren15-21/+21
Fix the node names for the GPIO LEDs to conform to the standard node name led-.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 nodeRobin van der Gracht1-1/+0
The 'fsl,ssi' documentation doesn't say anything about specifying this. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97Robin van der Gracht1-1/+0
According to Documentation/devicetree/bindings/sound/fsl,ssi.txt 'fsl,mode' should be specified for AC97 mode only. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6qdl-vicut1: add interrupt-counter nodesOleksij Rempel1-1/+40
interrupt-counter is mainline now, so we can add missing counter nodes. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: Enable the VPURobin van der Gracht1-4/+0
Enable Video Processing Unit to make accelerated video decoding work. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boardsOleksij Rempel2-1/+6
Activate low-pass/debounce filter on the touchscreen. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-plym2m: remove touchscreen-size-* propertiesOleksij Rempel1-2/+0
Remove touchscreen-size-* properties. This values are not correct, event if it works with ts_test tool, it fails to work properly with weston. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.Oleksij Rempel1-2/+1
At some point PWM cell count was changed, but it didn't triggered any error, since this DT was overwriting "#pwm-cells". To make sure, we are in sync with the kernel driver, remove this property and fix the pwm consumer. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: Remove backlight enable gpioOleksij Rempel1-9/+0
The backlight power is controlled through the reg_bl_12v0 regulator. Co-Developed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen nodeOleksij Rempel1-0/+15
Add touchscreen support to the Protonic VT7 board. Co-Developed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: Move BCM2711 RPi specific into separate dtsiStefan Wahren2-71/+84
There is a lot of Raspberry Pi specific stuff (neither SoC or board specific) for the BCM2711 which is currently in the RPi 4 B dts. In order to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it into a separate dtsi. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-4-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08ARM: dts: bcm283x: Fix up MMC node namesStefan Wahren2-2/+2
Fix the node names for the MMC/SD card controller to conform to the standard node name mmc@.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08ARM: boot: dts: bcm2711: Add BCM2711 VEC compatibleMateusz Kwiatkowski1-0/+1
The BCM2711 has a slightly different VEC than the one found in the older SoCs. Now that we support the new variant, add its compatible to the device tree. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210520150344.273900-5-maxime@cerno.tech Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"Stefan Wahren2-2/+2
This reverts commit 278407a53c3b33fb820332c4d39eb39316c3879a. The original change breaks USB config on Raspberry Pi Zero and Pi 4 B, because it exceeds the total fifo size of 4080. A naive attempt to reduce g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back. Fixes: 278407a53c3b ("ARM: dts: bcm283x: increase dwc2's RX FIFO size") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/1622293371-5997-1-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-07ARM: 9083/1: uncompress: atags_to_fdt: Spelling s/REturn/Return/Geert Uytterhoeven1-1/+1
Fix a capitalization typo. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-07ARM: 9076/1: boot: remove redundant piggy_data from clean-filesMasahiro Yamada1-1/+1
Kbuild cleans up files listed in 'targets'. 'piggy_data' is already added to 'targets' a few lines above. Adding it to 'clean-files' is redundant. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-07ARM: dts: aspeed: everest: Add pcie cable card indicator ledsVishwanatha Subbanna1-2/+618
These are leds on the IBM proprietary PCIE cards called cable cards. Cable cards have 2 ports on them and each port has an indicator led. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.