aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-05-22ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2cCorentin Labbe1-1/+1
gemini-dlink-dir-685.dt.yaml: gpio-i2c: $nodename:0: 'gpio-i2c' does not match '^i2c(@.*)?' >From schema: /usr/src/linux-next/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-22ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2cCorentin Labbe1-1/+1
This fixes dtcheck warning: arch/arm/boot/dts/gemini-dlink-dns-313.dt.yaml: gpio-i2c: $nodename:0: 'gpio-i2c' does not match '^i2c(@.*)?' Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-21ARM: dts: Fix up the IXP4xx ethernet nodesLinus Walleij3-11/+24
All of IXP4xx SoCs has an EthA at 0xc800c000 so move this from the IXP[56]x to the IXP4xx DTSI. Then add the second ethernet port on the Cambria GW2358-4 on EthA. Reported-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-21usb: isp1760: use dr_mode bindingRui Miguel Silva6-6/+6
There is already a binding to describe the dual role mode (dr_mode), use that instead of defining a new one (port1-otg). Update driver code and devicetree files that use that port1-otg binding. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Link: https://lore.kernel.org/r/20210513084717.2487366-7-rui.silva@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21ARM: dts: osd3358-sm-red: group in the same phandle all its propertiesDario Binacchi1-70/+62
Having a single phandle reference for rtc0, mmc0 and am335x_pinmux makes the DTS well-ordered and therefore more readable. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-21ARM: dts: dra76-evm: remove ov5640Tomi Valkeinen1-35/+0
DRA76 EVM boards are not shipped with OV5640 sensor module, it is a separate purchase. OV5640 module is also just one of the possible sensors or capture boards you can connect. However, for some reason, OV5640 has been added to the board dts file, making it cumbersome to use other sensors. Remove the OV5640 from the dts file so that it is easy to use other sensors via DT overlays. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-19media: ARM: dts: sama5d4: enable Hantro G1 VDECEmil Velikov1-0/+7
Add the SAMA5D4 VDEC module which comprises Hantro G1 video decoder core. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-18ARM: dts: gemini: convert obsolete SPI propertiesCorentin Labbe3-9/+9
gpio-xxx are obsoletes properties, convert them to xxx-gpios. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: sun8i: r40: Add timer nodeJernej Skrabec1-0/+12
Allwinner R40 has a timer. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210510163647.2731675-1-jernej.skrabec@gmail.com
2021-05-18ARM: dts: sun8i: V3: add I2S interface to V3 dtsTobias Schramm1-0/+26
The Allwinner V3 SoC features an I2S interface. The I2S peripheral is identical to that in the Allwinner H3 SoC. This commit adds it to the Allwinner V3 dts. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-8-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: V3: add codec analog frontend to V3 dtsTobias Schramm1-0/+5
The Allwinner V3 SoC has a different analog codec frontend than the V3s SoC. The frontend used on the V3 SoC is compatible with the on used in the Allwinner H3 SoC. This patch adds the corresponding node to the Allwinner V3 dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-6-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dtsTobias Schramm1-0/+19
The Allwinner V3s and V3 SoCs feature an integrated analog audio codec. Additionally both have an analog frontend with mixers and amplifiers for the codec. This commit adds both, the analog codec and its frontend to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-4-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMATobias Schramm1-0/+10
This commit adds DMA properties to all peripherals supporting DMA on the Allwinner V3s, enabling accelerated data transfer to them. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-3-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add DMA controller to v3s dtsTobias Schramm1-0/+10
The Allwinner V3s and V3 feature a DMA controller. This commit adds it to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-2-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add pwm controller to v3s dtsTobias Schramm1-0/+9
The Allwinner V3s and V3 SoCs feature a pwm controller identical to the one used in the Allwinner A20. This commit adds it to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210513203527.2072090-3-t.schramm@manjaro.org
2021-05-18ARM: dts: href: Mount matrices for TVK R2Linus Walleij1-0/+6
This adds the proper mounting matrices for the TVK R2 board. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Fix some compatible stringsLinus Walleij3-4/+6
The Golden and Skomer phones have BCM4334 WLAN+BT chips, so make the compatible strings reflect the new available bindings for these. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Drop drdy pin assignment from magnetometerLinus Walleij1-1/+0
This magnetometer can not select which line provided the outgoing IRQ so drop it, the DT bindings will complain too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Fix orientation of accelerometerLinus Walleij1-0/+3
This adds a mounting matrix to the accelerometer on the TVK1281618 R3. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Rename gpio-controller nodeSebastian Reichel5-5/+5
Rename the AB8500 gpio controller node from ab8500-gpio to ab8500-gpiocontroller, since -gpio is a common suffix for gpio consumers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Fix interrupt cellsSebastian Reichel2-24/+24
Fix interrupt cells in DT AB8500/AB8505 source files. The compiled DTB files will stay the same. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-15ARM: dts: rockchip: move and restyle grf nodes rk3066/rk3188Johan Jonker3-49/+59
With grf.txt converted to YAML a lot of compatibles did not have 'simple-mfd' added in the old binding. That implies that if you have child nodes they need to be documented. Make the new layout fit for rk3066/rk3188, move and restyle the grf nodes. Remove rockchip,grf from usbphy node. Add "#phy-cells", because it is a required property by phy-provider.yaml With the conversion of syscon.yaml minItems for compatibles was set to 2. Current Rockchip rk3xxx.dtsi file only uses "syscon" for the grf registers. Add "syscon", "simple-mfd" compatible for rk3066/rk3188 to reduce notifications produced with: make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml Changed compatibles: "rockchip,rk3066-grf", "syscon", "simple-mfd" "rockchip,rk3188-grf", "syscon", "simple-mfd" Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210512122346.9463-4-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-14ARM: dts: ixp4xx: Add beeper to the NSLU2Linus Walleij1-0/+5
This adds the beeper GPIO to the NSLU2 completing the board support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-14ARM: dts: rockchip: rename vcc_stdby node name for rk3066a-rayeager.dtsJohan Jonker1-1/+1
A test with the command below gives this error: /arch/arm/boot/dts/rk3066a-rayeager.dt.yaml: /: '5v-stdby-regulator' does not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+' A node name shouldn't start with a number, so change it to 'stdby-regulator'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema /schemas/dt-core.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210510192054.8876-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-14ARM: dts: rockchip: Remove more clock-names from PWM nodesJohan Jonker1-4/+0
A test with the command below gives this error: /arch/arm/boot/dts/rk3228-evb.dt.yaml: pwm@110b0020: clock-names: ['pwm'] is too short Devices with only one PWM clock use it to both to derive the functional clock for the device and as the bus clock. The driver does not need "clock-names" to get a handle, so remove them all. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210510172911.6763-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-13ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulatorsMarek Vasut1-0/+12
Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1 via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs. While no instability or problems are currently observed, the regulators should be fully described in DT and that description should fully match the hardware, else this might lead to unforseen issues later. Fix this. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-13ARM: dts: imx6dl-yapp4: Configure the OLED display segment offsetMichal Vokáč1-0/+1
The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display. The display consist of a 128x64 OLED panel and a SSD1305 controller. The OLED panel resolution is 128x64 but the built-in controller default resolution is 132x64. To display properly a segment offset needs to be configured. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-13ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switchMichal Vokáč1-1/+5
The FEC does not have a PHY so it should not have a phy-handle. It is connected to the switch at RGMII level so we need a fixed-link sub-node on both ends. This was not a problem until the qca8k.c driver was converted to PHYLINK by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB"). That commit revealed the FEC configuration was not correct. Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Cc: stable@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-13ARM: dts: imx6: phyFLEX: Fix UART hardware flow controlPrimoz Fiser1-2/+3
Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-12ARM: dts: ixp4xx: Create a proper expansion busLinus Walleij3-29/+46
The IXP4xx expansion bus is 24 bits (256 MB) that is memory mapped between 0x50000000-0x5fffffff usin a set of chip selects. The size of the windows is 16 or 32MB defined by the boot loader system configuration at runtime. Create a rudimentary simple-bus and move the flash memories to the expansion bus, inside the SoC. Cc: Zoltan HERPAI <wigyori@uid0.hu> Cc: Raylynn Knight <rayknight@me.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-11ARM: dts: ixp4xx: Add PCI hostsLinus Walleij5-0/+113
This adds a basic PCI host definition to the base device tree for IXP4xx and then further details it in the 42x and 43x device tree include, also the specific target devices NSLU2 and GW2358 get proper PCI swizzling defined. Cc: Zoltan HERPAI <wigyori@uid0.hu> Cc: Raylynn Knight <rayknight@me.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 familyKrzysztof Kozlowski1-0/+1
The RTC on S2MPS11 PMIC on Odroid XU3/XU4 family of boards can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-10-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420Krzysztof Kozlowski1-0/+1
The RTC on S2MPS11 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-9-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale OctaKrzysztof Kozlowski1-0/+1
The RTC on S2MPS11 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-8-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on P4 NoteKrzysztof Kozlowski1-0/+1
The RTC on Maxim max77686 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-7-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3Krzysztof Kozlowski1-0/+1
The RTC on Maxim max77686 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-6-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on MidasKrzysztof Kozlowski1-0/+1
The RTC on Maxim max77686 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-5-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XUKrzysztof Kozlowski1-0/+1
The RTC on Maxim max77802 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-4-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on ArndaleKrzysztof Kozlowski1-0/+1
The RTC on S5M8767 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-3-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412Krzysztof Kozlowski1-0/+1
The RTC on S5M8767 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-2-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on Itop CoreKrzysztof Kozlowski1-0/+1
The RTC on S5M8767 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-1-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: s5pv210: remove unused Atmel touchscreen properties in GoniKrzysztof Kozlowski1-9/+0
The Atmel bindings and driver do not use custom properties like x/y-size, burst length, threshold and so on. The driver gets necessary data from the device directly. Remove unused properties to fix dtbs_check warning: arch/arm/boot/dts/s5pv210-goni.dt.yaml: touchscreen@4a: 'atmel,burst-length', 'atmel,orientation', 'atmel,threshold', 'atmel,x-line', 'atmel,x-size', 'atmel,y-line', 'atmel,y-size' do not match any of the regexes Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210506152044.37579-1-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4Krzysztof Kozlowski1-1/+1
There is no "max_brightness" property as pointed out by dtschema: arch/arm/boot/dts/exynos5422-odroidxu4.dt.yaml: led-controller: led-1: 'max-brightness' is a required property Fixes: 6658356014cb ("ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210505135941.59898-5-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1Krzysztof Kozlowski1-1/+1
There is no "max_brightness" property as pointed out by dtschema: arch/arm/boot/dts/exynos5422-odroidhc1.dt.yaml: led-controller: led-1: 'max-brightness' is a required property Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210505135941.59898-4-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3Krzysztof Kozlowski1-2/+2
There is no "max_brightness" property. This brings the intentional brightness reduce of green LED and dtschema checks as well: arch/arm/boot/dts/exynos5410-odroidxu.dt.yaml: led-controller-1: led-1: 'max-brightness' is a required property Fixes: 719f39fec586 ("ARM: dts: exynos5422-odroidxu3: Hook up PWM and use it for LEDs") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210505135941.59898-3-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100Krzysztof Kozlowski1-2/+2
Replace legacy MMS114 touchscreen properties to fix dtschema warnings: arch/arm/boot/dts/exynos4412-n710x.dt.yaml: touchscreen@48: 'x-size', 'y-size' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/exynos4412-n710x.dt.yaml: touchscreen@48: 'touchscreen-size-x' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210505135941.59898-2-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: exynos: align Broadcom WiFi with dtschemaKrzysztof Kozlowski4-4/+4
The Broadcom BCM4329 family dtschema expects devices to be compatible also with brcm,bcm4329-fmac: arch/arm/boot/dts/exynos3250-rinato.dt.yaml: wifi@1: compatible: 'oneOf' conditional failed, one must be fixed: ['brcm,bcm4334-fmac'] is too short 'brcm,bcm4329-fmac' was expected Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210505135941.59898-1-krzysztof.kozlowski@canonical.com
2021-05-11ARM: dts: sun8i-a33: Allow using multiple codec DAIsSamuel Holland1-2/+2
Increase #sound-dai-cells on the digital codec to allow using the other DAIs provided by the codec for AIF2 and AIF3. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210430035859.3487-3-samuel@sholland.org
2021-05-11ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F]Uwe Kleine-König1-6/+6
The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as done for all the other pins with GPIO functionality. Fix for consistency. There are no mainline users that needs adaption. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_EIM_D22 from hog groupFabio Estevam1-1/+0
The MX6QDL_PAD_EIM_D22 pad is already handled in the common imx6qdl-wandboard.dtsi file. Remove it from the local hog group to avoid the following runtime error: [ 0.117763] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 0.117785] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 0.117802] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 0.117822] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.117844] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.