aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-04-13ARM: dts: qcom: sdx55: Add Modem remoteproc nodeManivannan Sadhasivam1-0/+33
Add modem support to SDX55 using the PAS remoteproc driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-16-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: Fix node name for NAND controller nodeManivannan Sadhasivam2-2/+2
Use the common "nand-controller" node name for NAND controller node to fix the `make dtbs_check` validation for Qcom platforms. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-10-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add interconnect nodesManivannan Sadhasivam1-0/+33
Add interconnect nodes for the providers in SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-9-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add SCM nodeManivannan Sadhasivam1-0/+6
Add SCM node to enable SCM functionality on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-8-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add IMEM and PIL info regionManivannan Sadhasivam1-0/+15
Add a simple-mfd representing IMEM on SDX55 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteproc. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-6-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add modem SMP2P nodeManivannan Sadhasivam1-0/+31
Add SMP2P nodes for the SDX55 platform to communicate with the modem. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-5-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add CPUFreq supportManivannan Sadhasivam1-0/+29
Add CPUFreq support to SDX55 platform using the cpufreq-dt driver. There is no dedicated hardware block available on this platform to carry on the CPUFreq duties. Hence, it is accomplished using the CPU clock and regulators tied together by the operating points table. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add support for APCS blockManivannan Sadhasivam1-0/+9
The APCS block on SDX55 acts as a mailbox controller and also provides clock output for the Cortex A7 CPU. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-3-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add support for A7 PLL clockManivannan Sadhasivam1-0/+8
On SDX55 there is a separate A7 PLL which is used to provide high frequency clock to the Cortex A7 CPU via a MUX. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-2-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13Merge tag 'v5.13-rockchip-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dtArnd Bergmann7-9/+24
MMC aliases fixups and some property/compatible cleanups. * tag 'v5.13-rockchip-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: move rv1108 mmcx aliases to board dts files ARM: dts: rockchip: move rk322x mmcx aliases to board dts files ARM: dts: rockchip: remove clock-names property from watchdog node in rv1108.dtsi ARM: dts: rockchip: add new watchdog compatible to rk322x.dtsi ARM: dts: rockchip: add new watchdog compatible to rv1108.dtsi Link: https://lore.kernel.org/r/4638723.31r3eYUQgx@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-12ARM: dts: at91: sama5d2/trivial: fix letter case for etm hex addressNicolas Ferre1-2/+2
Fix the etm node hex address to lower case for matching regexp specification and removing the additional warning that looks like: arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' Reported-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-11ARM: dts: rockchip: move rv1108 mmcx aliases to board dts filesHeiko Stuebner3-3/+8
As suggested by Arnd Bergmann, mmc-aliases are supposed to be board-specific, so move the newly added general aliases to the board-level on rv1108-based boards. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210324122235.1059292-2-heiko@sntech.de
2021-04-11ARM: dts: rockchip: move rk322x mmcx aliases to board dts filesHeiko Stuebner4-3/+14
As suggested by Arnd Bergmann, mmc-aliases are supposed to be board-specific, so move the newly added general aliases to the board-level on rk322x-based boards. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210324122235.1059292-1-heiko@sntech.de
2021-04-09Merge tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann3-2/+65
Qualcomm dts updates for v5.13 This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger for the two devices. * tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-klte: Add bluetooth support ARM: dts: qcom: msm8974: add blsp2_uart8 ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: clps711x: fix missing interrupt parentArnd Bergmann1-0/+1
The kernelci.org bot reports a build time regression: arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent There is only one interrupt controller in this SoC, so I assume this is the parent. Fixes: 2bd86203acf3 ("ARM: dts: clps711x: Add keypad node") Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: mvebu: fix SPI device nodeArnd Bergmann1-1/+1
dtc warns about a mismatched address: arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1" I assume the "reg" property is correct here, so adjust the unit address accordingly. Fixes: c6dfc019c239 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/driversArnd Bergmann3-181/+133
ASPEED LPC updates for 5.13 These patches fix the ASPEED LPC bindings and LPC-related device drivers so in the future the KCS driver can properly use the hardware. * tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning Link: https://lore.kernel.org/r/CACPK8Xcb12LsVr7CUaXXjQskKbVjb7x+jgueG1Hik-kBPWtDSg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dtArnd Bergmann8-17/+3587
BMC device tree updates for 5.13 The ASPEED and Nuvoton pull request now comes as a combined BMC pull request. - New machines * ASRock E3C246D4I, an AST2500 BMC for an Xeon E-2100/E-2200 mini-ITX system * Quanta GBS, an NPCM730 BMC for an x86 server - Power10 BMC updates for Everest and Rainier - GPIO line names for Mihawk * tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (21 commits) ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree ARM: dts: aspeed: mihawk: Add GPIO line names ARM: dts: aspeed: Add Rainier 1S4U machine ARM: dts: aspeed: everest: Add size/address cells ARM: dts: aspeed: everest: Enable fan watchdog ARM: dts: aspeed: everest: Add RTC ARM: dts: aspeed: everest: GPIOs support ARM: dts: aspeed: everest: Add UCD90320 power sequencer ARM: dts: aspeed: everest: Add power supply i2c devices ARM: dts: aspeed: everest: Add pca9552 fan presence ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines ARM: dts: aspeed: everest: Add max31785 fan controller device ARM: dts: aspeed: everest: Add I2C components ARM: dts: aspeed: rainier 4U: Fix fan configuration ARM: dts: aspeed: rainier: Add missing fan nodes ARM: dts: aspeed: rainier: Enable fan watchdog ARM: dts: aspeed: rainier: Add presence GPIOs ARM: dts: aspeed: rainier: Add additional processor CFAMs ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans ARM: dts: aspeed: rainier: Add directly controlled LEDs ... Link: https://lore.kernel.org/r/CACPK8Xe-KV5BeQwOH6NKC1++FCVqwwNCGBh7hEbBORfrmxfTtQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450Jonathan Neuschäfer2-0/+42
The Supermicro X9SCi-LN4F is a server mainboard featuring the WPCM450 BMC. This patch adds a minimal devicetree for Linux running on the BMC. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210406120921.2484986-10-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chipJonathan Neuschäfer1-0/+76
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally marketed as Winbond WPCM450. This patch adds a devicetree with basic functionality. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210406120921.2484986-9-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09ARM: dts: Remove LPC BMC and Host partitionsChia-Wei, Wang3-181/+133
The LPC controller has no concept of the BMC and the Host partitions. A concrete instance is that the HICRB[5:4] are for the I/O port address configurtaion of KCS channel 1/2. However, the KCS driver cannot access HICRB for channel 1/2 initialization via syscon regmap interface due to the parition boundary. (i.e. offset 80h) In addition, for the HW design backward compatibility, a newly added HW control bit could be located at any reserved one over the LPC addressing space. Thereby, this patch removes the lpc-bmc and lpc-host child node and thus the LPC partitioning. Note that this change requires the synchronization between device tree change and the driver change. To prevent the misuse of old devicetrees with new drivers, or vice versa, the v2 compatible strings are adopted for the LPC device as listed: "aspeed,ast2400-lpc-v2" "aspeed,ast2500-lpc-v2" "aspeed,ast2600-lpc-v2" Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210319062752.145730-2-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: owl-s500-roseapplepi: Add ATC2603C PMICCristian Ciocaltea1-6/+126
Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V' dummy regulator used for the uSD supply. Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/2e0a2931ae3757f016948e7c78e8e54afa325ae0.1615538629.git.cristian.ciocaltea@gmail.com Link: https://lore.kernel.org/r/20210408062232.3575-1-mani@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dtArnd Bergmann2-0/+236
mvebu dt for 5.13 (part 1) Add support for ATL-x530 Board (Armada 38x based) * tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: Add device tree for ATL-x530 Board Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixesArnd Bergmann4-8/+13
Fixes for omaps for v5.12-rc cycle Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Also included are two compiler warning fixes. * tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix uninitialized sr_inst ARM: dts: Fix swapped mmc order for omap3 ARM: OMAP2+: Fix warning for omap_init_time_of() ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Link: https://lore.kernel.org/r/pull-1617702755-711306@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940Tony Lindgren2-2/+22
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm percpu timers instead. Let's configure dmtimer3 and 4 as percpu timers by default, and warn about the issue if the dtb is not configured properly. Let's do this as a single patch so it can be backported to v5.8 and later kernels easily. Note that this patch depends on earlier timer-ti-dm systimer posted mode fixes, and a preparatory clockevent patch "clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue". For more information, please see the errata for "AM572x Sitara Processors Silicon Revisions 1.1, 2.0": https://www.ti.com/lit/er/sprz429m/sprz429m.pdf The concept is based on earlier reference patches done by Tero Kristo and Keerthy. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
2021-04-08ARM: dts: Add board-specific compatible string to npcm750-evb devicetreeJonathan Neuschäfer1-1/+1
According to the revised binding, the devicetree needs a board-specific compatible string. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20210320164023.614059-2-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: nuvoton: Add Quanta GBS BMC Device TreeGeorge Hung2-0/+1136
Add the device tree for the Quanta GBS BMC based on NPCM730 SoC. Signed-off-by: George Hung <george.hung@quantatw.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330071336.18370-1-george.hung@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: mihawk: Add GPIO line namesNichole Wang1-0/+33
Name the GPIOs to help userspace work with them. The names describe the functionality the lines provide, not the net or ball name. This makes it easier to share userspace code across different systems and makes the use of the lines more obvious. Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add Rainier 1S4U machineEddie James3-1/+16
The 1S4U version of the Rainier system has only 4 fans. Create a new tree, include the 4U version, and delete the 2 extra fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add size/address cellsJoel Stanley1-0/+4
The gpio and fan nodes reg properties cause dtc to emit a noisy warning about relying on default sizes. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Enable fan watchdogEddie James1-0/+14
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add RTCEddie James1-0/+5
Add the RTC at the appropriate I2C bus and address. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-20-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: GPIOs supportAlpana Kumari1-0/+297
This commit adds support for- - Presence GPIOs - I2C control GPIOs - Op-panel GPIOs (ex PHR) Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add UCD90320 power sequencerJim Wright1-0/+5
Add UCD90320 chip to Everest device tree. Signed-off-by: Jim Wright <jlwright@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-18-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add power supply i2c devicesBrandon Wyman1-0/+20
Add the i2c/pmbus power supply devices to the everest device tree. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add pca9552 fan presenceMatthew Barth1-0/+128
Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the 4 GPIO fan presence inputs. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add FSI CFAMs and re-number enginesEddie James1-4/+644
Add additional CFAMs and re-number the existing engines for the extra processors present on the Everest system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add max31785 fan controller deviceMatthew Barth1-4/+40
Add the max31785 configuration at address 0x52 on i2c14 behind mux0 channel 3. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add I2C componentsPriyanga Ramasamy1-0/+408
Tested and able to bound the devices with i2c driver. Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier 4U: Fix fan configurationEddie James1-0/+14
The 4U fans didn't have the correct properties since the fan nodes were redefined. Fix this by referencing each fan individually and adding the differences to the 4U fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add missing fan nodesJoel Stanley1-0/+12
The Maxim fan controller has six fans attached. Two of these were missing from the description. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Enable fan watchdogEddie James1-0/+14
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add presence GPIOsAlpana Kumari1-8/+248
This commit adds presence detect GPIO chips for various FRUs on Rainier. Also, correct the I2C address for the tca9554. Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add additional processor CFAMsEddie James1-2/+281
Rainier has two dual-chip modules and therefore four CFAMs with their associated engines. Add these to the devicetree with the i2c busses that have devices on them. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add gpio-keys-polled for fansBrandon Wyman1-0/+43
Add a gpio-keys-polled section to the Rainier device tree for the fan presence signals on the PCA9552 I2C device on bus 7. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add directly controlled LEDsVishwanatha Subbanna1-2/+26
These LEDs are directly connected to the BMC's GPIO bank. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add ASRock E3C246D4I BMCZev Weiss2-0/+203
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series mini-ITX board that we hope can provide a decent platform for OpenBMC development. This initial device-tree provides the necessary configuration for basic BMC functionality such as host power control, serial console and KVM support, and POST code snooping. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-07ARM: dts: mvebu: Add device tree for ATL-x530 BoardAryan Srivastava2-0/+236
Add device tree file for x530 board. This has an Armada 385 SoC. Has NAND-flash for user storage and SPI for booting. Covers majority of x530 and GS980MX variants. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-07Merge tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtArnd Bergmann11-12/+21
AT91 dt for 5.13: - two little fixes (typo, W=1) - a change in gpio button keycode for recent boards * tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: add ETB and ETM unit name ARM: dts: at91: change the key code of the gpio key ARM: dts: at91: Fix a typo Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann12-54/+110
Samsung DTS ARM changes for v5.13 1. Configure battery charger and front camera on GT-I9100 phone. 2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags to match real type of interrupt coming from the device. 3. Correct DTS with dtschema. This brings back the commit adding input clock to CMU in Exynos4412 Odroid which was reverted some time ago due to unsupported deferred probes (now supported and tested). * tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add front camera support to I9100 ARM: dts: exynos: white-space cleanups ARM: dts: exynos: replace deprecated NTC/Murata compatibles ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family ARM: dts: exynos: correct PMIC interrupt trigger level on Snow ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250 ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 ARM: dts: exynos: add charger supply for I9100 Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.