aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-11-26ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gaugeIskren Chernev1-0/+25
The LG Nexus 5 uses a maxim17048 fuelgauge. The maxim,rcomp value is taken from downstream dt. Temperature-based compensation is not yet supported in the mainline driver, but the readings seem fine nevertheless. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> Link: https://lore.kernel.org/r/20201126141144.1763779-2-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-26ARM: dts: qcom: msm8974-klte: Add fuel gaugeIskren Chernev1-0/+39
The Samsung Galaxy S5 uses a maxim17048 fuelgauge. The maxim,rcomp value is taken from downstream kernel. Model data and temperature-based compensation are not yet supported in the mainline driver, but the readings seem fine nevertheless. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20201126141144.1763779-1-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-26ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatiblesAhmad Fatoum1-1/+1
Earlier commit modified the binding, so the SiP is to be specified as well. Adjust the device tree accordingly. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: Add DHCOM based PicoITX boardMarek Vasut3-0/+179
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom board-to-board expansion connector. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP sysconAhmad Fatoum1-1/+1
The stm32mp1 TAMP peripheral has 32 backup registers that survive a warm reset. This makes them suitable for storing a reboot mode, which the vendor's kernel tree is already doing[0]. The actual syscon-reboot-mode child node can be added by a board.dts or fixed up by the bootloader. For the child node to be probed, the compatible needs to include simple-mfd. The binding now specifies this, so have the SoC dtsi adhere to it. [0]: https://github.com/STMicroelectronics/linux/commit/2e9bfc29dd Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: update stm32mp151 for remote proc synchronization supportArnaud Pouliquen1-0/+7
Two backup registers are used to store the Cortex-M4 state and the resource table address. Declare the tamp node and add associated properties in m4_rproc node to allow Linux to attach to a firmware loaded by the first boot stages. Associated driver implementation is available in commit 9276536f455b3 ("remoteproc: stm32: Parse syscon that will manage M4 synchronisation"). Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151Amelie Delaunay1-2/+2
Defaut use case on stm32mp151 USB OTG is ethernet gadget, using EP1 bulk endpoint (MPS=512 bytes) and EP2 interrupt endpoint (MPS=16 bytes). This patch optimizes USB OTG FIFO sizes accordingly. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: fix dmamux reg property on stm32h743Amelie Delaunay1-1/+1
Reg property length should cover all DMAMUX_CxCR registers. DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest offset is at 0x3c, so length should be 0x40. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: fix dmamux reg property on stm32mp151Amelie Delaunay1-1/+1
Reg property length should cover all DMAMUX_CxCR registers. DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest offset is at 0x3c, so length should be 0x40. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151Amelie Delaunay1-3/+3
Update mdma1 clients channel priority level following stm32-mdma bindings. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkxAmelie Delaunay2-0/+37
This patch adds support for STUSB1600 USB Type-C port controller, used on I2C4 on stm32mp15xx-dkx. The default configuration on this board, on Type-C connector, is: - Dual Power Role (DRP), so set power-role to "dual"; - Vbus limited to 500mA, so set typec-power-opmode to "default" (it means 500mA in USB 2.0). typec-power-opmode is used to reconfigure the STUSB1600 advertising of current capability when its NVM is not in line with the board layout. On stm32mp15xx-dkx, Vbus power source of STUSB1600 is 5V_VIN. So power operation mode depends on the power supply used. To avoid any power issues, it is better to limit Vbus to 500mA on this board. ALERT# is the interrupt pin of STUSB1600. It needs an external pull-up, and signal is active low. USB OTG controller ID and Vbus signals are not connected on stm32mp15xx-dkx boards, so disconnection are not detected. Without DWC2 usb-role-switch: - if you unplug the USB cable from the Type-C port, you have to manually disconnect the USB gadget: echo disconnect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect - Then you can plug the USB cable again in the Type-C port, and manually reconnect the USB gadget: echo connect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect With DWC2 usb-role-switch, USB gadget is dynamically disconnected or connected. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrlPatrick Delaunay1-14/+14
Move spi4 at the right alphabetical place within stm32mp15-pinctrl Fixes: 4fe663890ac5 ("ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval boardHugues Fruchet1-0/+1
Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5). Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 boardHugues Fruchet1-0/+1
Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5). Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: enable CRYP by default on stm32mp15Lionel Debieve2-0/+8
Enable CRYP1 device for cryp accelerated support on stm32mp157C-EV1/DK2 STMicroelectronics platforms. Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: enable CRC1 by default on stm32mp15Nicolas Toromanoff2-0/+8
Enable CRC1 device for CRC-32 accelerated support on stm32mp15 STMicroelectronics platforms. Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: enable HASH by default on stm32mp15Lionel Debieve2-0/+8
Enable HASH1 device for HASH accelerated support on stm32mp15 STMicroelectronics platforms. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: Add LP timer wakeup-source on stm32mp151Fabrice Gasnier1-0/+5
LP timer can be used to wakeup from stop mode on stm32mp151. Add wakeup-source properties to all LP timer instances. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: Add LP timer irqs on stm32mp151Fabrice Gasnier1-0/+5
Add all LP timer irqs on stm32mp151. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: update sdmmc IP version for STM32MP15Yann Gautier1-3/+3
Update the IP version to v2.0, which supports linked lists in internal DMA, and is present in STM32MP1 SoCs. The mmci driver supports the v2.0 periph id since 7a2a98be672b ("mmc: mmci: Add support for sdmmc variant revision 2.0"), so it's now Ok to add it into the SoC device tree to benefit from the improved DMA support. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: dts: stm32: Harmonize EHCI/OHCI DT nodes name on stm32mp15Serge Semin1-2/+2
In accordance with the Generic EHCI/OHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Amelie Delaunay <amelie.delaunay@st.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-26ARM: zynq: Add Z-turn board V5Alexandre GRIVEAUX4-100/+129
Adding Z-turn board V5 to resolve the change between: "Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035 "Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031 Changes v1 -> v2: Instead of using new board, the v2 using a common devicetree for z-turn boards (zynq-zturn-common.dtsi) and for each board a specific DT Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info> Link: https://lore.kernel.org/r/20201126070516.85882-1-agriveaux@deutnet.info Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-24ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-namesMichael Klein1-0/+64
Add gpio-line-names as documented in the Banana Pi wiki [1] and in the schematics [2]. [1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#GPIO_PIN_define [2]: https://drive.google.com/file/d/0B4PAo2nW2KfnMW5sVkxWSW9qa28/view Signed-off-by: Michael Klein <michael@fossekall.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201123114535.1605939-1-michael@fossekall.de
2020-11-24ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHYAdam Sampson1-2/+2
The RX/TX delays for the Ethernet PHY on the Linksprite pcDuino 3 Nano are configured in hardware, using resistors that are populated to pull the RTL8211E's RXDLY/TXDLY pins low or high as needed. phy-mode should be set to rgmii-id to reflect this. Previously it was set to rgmii, which used to work but now results in the delays being disabled again as a result of the bugfix in commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Tested on two pcDuino 3 Nano boards purchased in 2015. Without this fix, Ethernet works unreliably on one board and doesn't work at all on the other. Fixes: 061035d456c9 ("ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board") Signed-off-by: Adam Sampson <ats@offog.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20201123174739.6809-1-ats@offog.org
2020-11-24ARM: dts: hisilicon: fix errors detected by syscon.yamlZhen Lei1-1/+1
The DT binding for system controller is not allowed to contain only the compatible string "syscon", the Hisilicon peripheral subsystem controller should add compatible string "hisilicon,peri-subctrl". Otherwise, the error "compatible: ['syscon'] is too short" will be reported. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: hisilicon: fix errors detected by spi-pl022.yamlZhen Lei1-6/+6
1. Change clock-names to "sspclk", "apb_pclk". Both of them use the same clock. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: hisilicon: fix errors detected by synopsys-dw-mshc.yamlZhen Lei1-2/+2
Look at the clock-names schema defined in synopsys-dw-mshc.yaml: clock-names: items: - const: biu - const: ciu The "biu" needs to be placed before the "ciu". Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: hisilicon: fix errors detected by root-node.yamlZhen Lei4-4/+4
Make the memory node name match the regex "^memory(@[0-9a-f]+)?$" which is described in memory.yaml. Otherwise, it will be treated as root node, and misreported by root-node.yaml. Errors misreported by root-node.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: hisilicon: fix errors detected by simple-bus.yamlZhen Lei4-4/+4
Change bus node name from "amba" to "amba-bus" to match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: hisilicon: fix errors detected by usb yamlZhen Lei1-2/+2
1. Change node name to match '^usb(@.*)?' These errors are detected by generic-ehci.yaml and generic-ohci.yaml. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: hisilicon: fix errors detected by pl011.yamlZhen Lei4-50/+50
1. Change node name to match '^serial(@[0-9a-f,]+)*$' 2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same clock. 3. Change pinctrl-names to "default", "sleep". Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yamlZhen Lei3-16/+16
1. Change node name to match '^serial(@[0-9a-f,]+)*$' 2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same clock. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-11-24ARM: dts: at91: sama5d3_xplained: add pincontrol for USB HostCristian Birsan1-0/+7
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@microchip.com
2020-11-24ARM: dts: at91: sama5d4_xplained: add pincontrol for USB HostCristian Birsan1-0/+7
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: 38153a017896f ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-3-cristian.birsan@microchip.com
2020-11-24ARM: dts: at91: sam9x60: add pincontrol for USB HostCristian Birsan1-0/+9
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-2-cristian.birsan@microchip.com
2020-11-23Merge tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dtArnd Bergmann8-16/+29
Ux500 DTS updates for the v5.11 kernels: - Rename the DSI controllers to match the preferred schema. - Pull down the SDI2 feedback clock on the Skomer. - Add proper supplies to the MaxToch touchscreen on the Golden. * tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500-golden: Add proper supplies to touchscreen ARM: dts: ux500: skomer: Pull down SDI2 FBCLK ARM: dts: ux500: Rename DSI controller nodes Link: https://lore.kernel.org/r/CACRpkdY_M4xj++QhRPqX6N3x9YmFNJkz70DnvBj7Ai-dOtCJSQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-23ARM: dts: add Nuvoton NPCM730 device treeTomer Maimon1-0/+44
Add Nuvoton NPCM730 SoC device tree. The Nuvoton NPCN730 SoC is a part of the Nuvoton NPCM7xx SoCs family. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Benjamin Fair <benjaminfair@google.com> Link: https://lore.kernel.org/r/20201119080002.100342-1-tmaimon77@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-23Merge tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann52-265/+526
Samsung DTS ARM changes for v5.11 1. Many cleanups of DTS and alignments to dtschema. Most of them do not have any functional effect except passing dtschema checks or dtc W=2 builds. 2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two ports, missing supply to the USB over-current and VBUS control pins and finally missing pin configuration for these pins. 3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of using interrupts. 4. Correct the usage of "opp-shared" properties which lead to disabling the bus frequency and voltage scaling. 5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards. 6. Enable dual-role USB on Odroid U3+ board. 7. Add Ethernet description in multiple Odroid DTS allowing also easy MAC address filling by bootloader. 8. Add Ethernet to Artik 5 (Exynos3250) board. 9. Add interconnect properties to Exynos4412 to fix old Mixer issues. * tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits) ARM: dts: exynos: use hyphens in MFC reserved memory node names ARM: dts: exynos: use hyphens in Exynos5 node names ARM: dts: exynos: use generic name for max77693 motor in Midas ARM: dts: exynos: use hyphens in Exynos4 node names ARM: dts: exynos: use hyphens in Exynos3250 node names ARM: dts: exynos: Add interconnects to Exynos4412 mixer ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes ARM: dts: exynos: Add Ethernet to Artik 5 board ARM: dts: exynos: Add a placeholder for a MAC address ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2 ARM: dts: exynos: Add Ethernet interface description for Odroid U3 ARM: dts: exynos: Add Ethernet interface description for Odroid XU ARM: dts: exynos: Add Ethernet interface description for Odroid XU3 Lite ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boards ARM: dts: s5pv210: adjust node names to DT spec ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards ARM: dts: exynos: adjust node names to DT spec in Odroid XU ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards ARM: dts: exynos: remove redundant status=okay in Exynos4412 boards ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards ... Link: https://lore.kernel.org/r/20201113162211.10020-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-23Merge tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dtArnd Bergmann2-0/+321
Renesas ARM DT updates for v5.11 - Touch screen and OV5640 camera support for the iWave RainboW Qseven board (G21D), and its camera expansion board, - Support for the AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2 boards, - SPI (MSIOF) support for the R-Car M3-W+ SoC, - Digital Radio Interface (DRIF) support for the R-Car M3-N SoC, - Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo, - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404 arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling arm64: dts: renesas: r8a77965: Add DRIF support arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances arm64: dts: renesas: r8a77961: Add MSIOF nodes arm64: dts: renesas: Align GPIO hog names with dtschema ARM: dts: r8a7742-iwg21d-q7: Add LCD support Link: https://lore.kernel.org/r/20201113150854.3923885-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-23ARM: dts: ux500-golden: Add proper supplies to touchscreenLinus Walleij1-2/+5
This sets up the Atmel maXTouch touchscreen to use proper VDDA and VDD supplies as now supported by bindings and driver. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Nick Reitemeyer <nick.reitemeyer@web.de> Cc: Nick Dyer <nick@shmanahar.org> Link: https://lore.kernel.org/r/20201120124212.1086063-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-22Merge tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+3
Pull EFI fixes from Borislav Petkov: "Forwarded EFI fixes from Ard Biesheuvel: - fix memory leak in efivarfs driver - fix HYP mode issue in 32-bit ARM version of the EFI stub when built in Thumb2 mode - avoid leaking EFI pgd pages on allocation failure" * tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Free efi_pgd with free_pages() efivarfs: fix memory leak in efivarfs_create() efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
2020-11-22ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 NoteMartin Jücker1-1/+1
The reset GPIO logic of the Atmel maxtouch driver was changed to be active low at around the same time P4 Note device tree was accepted into the kernel. Adjust the configuration so that the touchscreen is in a usable state. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201120160053.18942-1-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-21ARM: dts: keystone-k2g-evm: add HDMI and analog audio dataPeter Ujfalusi1-0/+112
The board is using McASP2 for both analog (tlv320aic3106) and HDMI (SiI9022) audio. 12.288MHz oscillator provides the MCLK for both aic3106 and SiI9022. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-11-20Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/nextFlorian Fainelli3-2/+4
- Maxime introduces a quirk to avoid EMI between WiFi and HDMI@1440p on RPi4b. - Pavel fixes dwc2's fifo size to properly support isochronous transfers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: NSP: Provide defaults ports container nodeFlorian Fainelli6-15/+4
Provide an empty 'ports' container node with the correct #address-cells and #size-cells properties. This silences the following warning: arch/arm/boot/dts/bcm958522er.dt.yaml: ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed: 'ports' is a required property 'ethernet-ports' is a required property From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: NSP: Add a SRAB compatible string for each boardFlorian Fainelli3-0/+12
Provide a valid compatible string for the Ethernet switch node based on the board including the switch. This allows us to have sane defaults and silences the following warnings: arch/arm/boot/dts/bcm958522er.dt.yaml: ethernet-switch@36000: compatible: 'oneOf' conditional failed, one must be fixed: ['brcm,bcm5301x-srab'] is too short 'brcm,bcm5325' was expected 'brcm,bcm53115' was expected 'brcm,bcm53125' was expected 'brcm,bcm53128' was expected 'brcm,bcm5365' was expected 'brcm,bcm5395' was expected 'brcm,bcm5389' was expected 'brcm,bcm5397' was expected 'brcm,bcm5398' was expected 'brcm,bcm11360-srab' was expected 'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab', 'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab', 'brcm,bcm53019-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab', 'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab', 'brcm,bcm58311-srab', 'brcm,bcm58313-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab', 'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab', 'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch', 'brcm,bcm6328-switch', 'brcm,bcm6368-switch'] From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: NSP: Fix Ethernet switch SGMII register nameFlorian Fainelli1-1/+1
The register name should be "sgmii_config", not "sgmii", this is not a functional change since no code is currently looking for that register by name (or at all). Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: NSP: Update ethernet switch node nameFlorian Fainelli1-1/+1
Update the switch unit name from srab to ethernet-switch, allowing us to fix warnings such as: CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: srab@18007000: $nodename:0: 'srab@18007000' does not match '^(ethernet-)?switch(@.*)?$' From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: BCM5301X: Provide defaults ports container nodeFlorian Fainelli12-33/+4
Provide an empty 'ports' container node with the correct #address-cells and #size-cells properties. This silences the following warning: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed: 'ports' is a required property 'ethernet-ports' is a required property From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: BCM5301X: Add a default compatible for switch nodeFlorian Fainelli3-1/+9
Provide a default compatible string which is based on the 53011 SRAB compatible by default. The 4709 and 47094 default to the 53012 SRAB compatible. This allows us to have sane defaults and silences the following warnings: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one must be fixed: ['brcm,bcm5301x-srab'] is too short 'brcm,bcm5325' was expected 'brcm,bcm53115' was expected 'brcm,bcm53125' was expected 'brcm,bcm53128' was expected 'brcm,bcm5365' was expected 'brcm,bcm5395' was expected 'brcm,bcm5389' was expected 'brcm,bcm5397' was expected 'brcm,bcm5398' was expected 'brcm,bcm11360-srab' was expected 'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab', 'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab', 'brcm,bcm53019-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab', 'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab', 'brcm,bcm58311-srab', 'brcm,bcm58313-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab', 'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab', 'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch', 'brcm,bcm6328-switch', 'brcm,bcm6368-switch'] From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.