aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-11-20ARM: dts: BCM5301X: Update Ethernet switch node nameFlorian Fainelli1-1/+1
Update the switch unit name from srab to ethernet-switch, allowing us to fix warnings such as: CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: srab@18007000: $nodename:0: 'srab@18007000' does not match '^(ethernet-)?switch(@.*)?$' From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: sun8i: v3s: fix GIC node memory rangeIcenowy Zheng1-1/+1
Currently the GIC node in V3s DTSI follows some old DT examples, and being broken. This leads a warning at boot. Fix this. Fixes: f989086ccbc6 ("ARM: dts: sunxi: add dtsi file for V3s SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201120050851.4123759-1-icenowy@aosc.io
2020-11-20ARM: dts: bcm283x: increase dwc2's RX FIFO sizePavel Hofman2-2/+2
The previous version of the dwc2 overlay set the RX FIFO size to 256 4-byte words. This is not enough for 1024 bytes of the largest isochronous high speed packet allowed, because it doesn't take into account extra space needed by dwc2. RX FIFO's size is calculated based on the following (in 4byte words): - 13 locations for SETUP packets 5*n + 8 for Slave and Buffer DMA mode where n is number of control endpoints which is 1 on the bcm283x core - 1 location for Global OUT NAK - 2 * 257 locations for status information and the received packet. Typically two spaces are recommended so that when the previous packet is being transferred to AHB, the USB can receive the subsequent packet. - 10 * 1 location for transfer complete status for last packet of each endpoint. The bcm283x core has 5 IN and 5 OUT EPs - 10 * 1 additional location for EPDisable status for each endpoint - 5 * 2 additional locations are recommended for each OUT endpoint Total is 558 locations. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/e9e7d070-593c-122f-3a5c-2435bb147ab2@ivitera.com/
2020-11-20ARM: dts: rpi-4: disable wifi frequenciesMaxime Ripard1-0/+2
The RPi4 WiFi chip and HDMI outputs have some frequency overlap with crosstalk around 2.4GHz. Let's mark it as such so we can use some evasive maneuvers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201029134018.1948636-3-maxime@cerno.tech
2020-11-19ARM: dts: Configure power domain for omap5 dssTony Lindgren1-0/+1
This allows shutting down dss domain when the screen blanks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: omap5: add remaining PRM instancesTero Kristo1-0/+57
Add remaining PRM instances for the omap5 SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: OMAP2+: Drop legacy platform data for dra7 gpmcTony Lindgren1-15/+33
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: Configure interconnect target module for dra7 ivaTony Lindgren2-0/+41
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: dra7: add remaining PRM instancesTero Kristo1-0/+76
Add remaining PRM instances for the dra7 SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: OMAP2+: Drop legacy platform data for omap4 gpmcTony Lindgren1-16/+33
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: OMAP2+: Drop legacy platform data for omap4 ivaTony Lindgren1-5/+26
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: Configure power domain for omap4 dspTony Lindgren1-0/+1
This allows shutting down the dsp domain when not in use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: Configure power domain for omap4 dssTony Lindgren1-0/+7
This allows shutting down dss domain when the screen blanks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: omap4: add remaining PRM instancesTero Kristo1-0/+63
Add remaining PRM instances for the omap4 SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: aspeed: ast2600evb: Add MAC0Joel Stanley1-0/+20
MAC0 was not functional in the AST2600A0 SoC. This has been resolved with the A1, so allow use of this port on EVBs with the A1 and subsequent revisions. A0 EVBs will still boot with this change, but the first Ethernet device will not be functional. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: aspeed: rainier: Don't shout addressesAndrew Jeffery1-2/+2
Make them lowercase. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201002063414.275161-4-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restrictedEddie James1-0/+6
Some of the FSI-attached SPI controllers can't use the loop command due to security requirements. Indicate this in the devicetree with the restricted compatible string. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20201102194713.14812-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: dra76x: m_can: fix order of clocksMarc Kleine-Budde1-2/+2
According to the bosch,m_can.yaml bindings the first clock shall be the "hclk", while the second clock "cclk". This patch fixes the order accordingly. Fixes: 0adbe832f21a ("ARM: dts: dra76x: Add MCAN node") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-19ARM: dts: nuvoton: Add Fii Kudo systemLancelot Kao2-0/+827
Add device tree for the Kudo BMC. Kudo is an Ampere (Altra) server platform manufactured by Fii and is based on a Nuvoton NPCM730 SoC. Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi@fii-na.com> Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai@fii-na.com> Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com> Reviewed-by: Vivekanand Veeracholan <vveerach@google.com> Reviewed-by: Benjamin Fair <benjaminfair@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201116232127.7066-1-lancelot.kao@fii-usa.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: nuvoton: Add NPCM7xx RunBMC Olympus Quanta machineTomer Maimon3-1/+1571
Add Nuvoton NPCM7xx RunBMC Olympus Quanta board device tree. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: nuvoton: Add Quanta GSJ BMCFran Hsu2-1/+492
The Quanta GSJ BMC uses the Nuvoton NPCM730 SoC. Included features: 1. Image partitions 2. PWM fan controller 3. USB device 4. Serial port 5. FIU 6. LEDs and GPIOs Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com> Reviewed-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrlFran Hsu1-0/+477
Add pinctrl definition for the Quanta GSJ BMC machine. Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com> Reviewed-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: nuvoton: Add Nuvoton NPCM730 device treeTomer Maimon1-0/+44
The Nuvoton NPCN730 SoC is a part of the Nuvoton NPCM7xx SoCs family. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: tacoma: Add reserved memory for ramoopsAndrew Jeffery1-0/+9
Reserve a 1.5MiB region of memory to record kmsg dumps, console and userspace message state into 16kiB ring-buffer slots. The sizing allows for up to 16 dumps to be captured and read out. Set max-reason to KMSG_DUMP_EMERG to capture bad-path reboots. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201022014731.2035438-7-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: rainier: Add reserved memory for ramoopsAndrew Jeffery1-0/+9
Reserve a 1.5MiB region of memory to record kmsg dumps, console and userspace message state into 16kiB ring-buffer slots. The sizing allows for up to 16 dumps to be captured and read out. Set max-reason to KMSG_DUMP_EMERG to capture bad-path reboots. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201022014731.2035438-6-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: tacoma: Fix node vs reg mismatch for flash memoryAndrew Jeffery1-1/+1
The mismatch lead to a miscalculation of regions in another patch, and shouldn't be mismatched anyway, so make them consistent. Fixes: 575640201e66 ("ARM: dts: aspeed: tacoma: Use 64MB for firmware memory") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201022014731.2035438-2-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17Input: atmel_mxt_ts - fix up inverted RESET handlerLinus Walleij10-10/+10
This driver uses GPIO descriptors to drive the touchscreen RESET line. In the existing device trees this has in conflict with intution been flagged as GPIO_ACTIVE_HIGH and the driver then applies the reverse action by driving the line low (setting to 0) to enter reset state and driving the line high (setting to 1) to get out of reset state. The correct way to handle active low GPIO lines is to provide the GPIO_ACTIVE_LOW in the device tree (thus properly describing the hardware) and letting the GPIO framework invert the assertion (driving high) to a low level and vice versa. This is considered a bug since the device trees are incorrectly mis-specifying the line as active high. Fix the driver and all device trees specifying a reset line. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201104153032.1387747-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in AriesJonathan Cameron1-1/+0
This property is only useful if a node has children as it allows them to then use io-channel properties in the parent. Here there are no children. This is harmless, but we are planning to shortly drop this property as it is rarely used correctly and there is little reason it would ever be needed as we can just provide the io-channels property to any child nodes that need it. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201115192951.1073632-8-jic23@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-17ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges propertyJonathan Cameron1-1/+0
This property is relevant to consumers of io-channels. Here it is used by a provider. dt-schema will now report and error as this property must be in the same node as io-channels and it is not here. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201115192951.1073632-6-jic23@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-17ARM: dts: exynos: Drop incorrect use of io-channel-rangesJonathan Cameron4-4/+0
This property is only relevant to consumers of io-channels, not providers. All these dtsi files have it alongside #io-channel-cells which indicates they are providers of io-channels, not consumers. Note that dt-schema will now flag this up due to a dependency between this property and io-channels. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201115192951.1073632-5-jic23@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-18ARM: dts: aspeed: rainier: Add 4U device-treeEddie James3-15/+43
Add a device-tree for the Rainier 4U system. Change the model name on the existing Rainier device-tree to 2U, and remove the two extra power supplies that are only present on the 4U system. Also add labels to the fan nodes for use in the 4U device-tree. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201028185647.14565-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: stm32: Add KS8851 on FMC2 to STM32MP1 DHCOMMarek Vasut1-0/+35
Add bindings for the KS8851 ethernet present on the STM32MP1 DHCOM SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: stm32: Add alternate pinmux for FMC EBI busMarek Vasut1-0/+55
Add another mux option for FMC EBI bus, this is used on DHCOM SoM for the second ethernet and on the PDK2 devkit for SRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoMMarek Vasut1-0/+2
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be used e.g. to detect cable insertion and removal. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: stm32: fix DCMI DMA features on stm32mp15 familyHugues Fruchet1-1/+1
Enable FIFO mode with half-full threshold. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: nuvoton: Add new device nodes to NPCM750 EVBTomer Maimon2-1/+523
Add the following new device nodes to NPCM750 evolution board device tree: - NPCM7xx Pin controller and GPIO - NPCM7xx PWM and FAN - NPCM7xx EHCI USB - NPCM7xx KCS - NPCM Reset - NPCM Peripheral SPI - NPCM FIU SPI - NPCM HWRNG - NPCM I2C - STMicro STMMAC Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-6-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Add new device nodesTomer Maimon2-6/+394
Add the following new device nodes to NPCM7XX: - NPCM7xx PWM and FAN. - NPCM7xx EHCI USB. - NPCM7xx KCS. - NPCM Reset. - NPCM Peripheral SPI. - NPCM FIU SPI. - NPCM HWRNG. - NPCM I2C. - STMicro STMMAC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-5-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Add pinctrl and GPIO nodeTomer Maimon1-0/+564
Add pin controller and GPIO node to NPCM7XX device tree. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-4-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Modify timer register sizeTomer Maimon1-1/+1
Modify NPCM7xx device tree timer register size from 0x50 to 0x1C to control only the timer registers and not other hw modules. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-3-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Modify clock parametersTomer Maimon2-12/+13
Modify NPCM7xx device tree clock parameter to clock constants that define at include/dt-bindings/clock/nuvoton,npcm7xx-clock.h file. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-2-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-16ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boardsMartin Jücker3-0/+1150
The P4 Note family contains a couple of variants of the Galaxy Note 10.1 tablet with mainly different modems. The GT-N8010/GT-N8013 is the WiFi only version. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-3-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-16Merge tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann3-2/+5
i.MX fixes for 5.10, round 4: - Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch device work reliably. - Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. - Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match hardware datasheet. - Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board. * tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO modeAlexander Shiyan4-4/+4
According to AM335x datasheet pin AM335X_PIN_GPMC_WPN in MODE7 works as GPIO0[31]. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am335x-boneblue: Enable eQEPDavid Lechner1-0/+54
This enables the Enhanced Quadrature Encoder Pulse (eQEP) module for connectors E1, E2 and E3 on BeagleBone Blue. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am33xx: Add nodes for eQEPDavid Lechner1-0/+27
This adds new nodes for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: dra7: add second SHA instanceTero Kristo1-2/+32
DRA7 SoC has two SHA instances, add the missing second one under the main dts file. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l3Tony Lindgren1-2/+4
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Move am4 l3 noc to a separate nodeTony Lindgren1-4/+8
In preparation for probing l3 with simple-pm-bus and genpd, we must move l3 noc to a separate node to prevent omap_l3_noc.c driver from claiming the whole l3 instance before simple-pm-bus has a chance to probe. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l4_perTony Lindgren1-5/+8
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l4_fastTony Lindgren1-2/+5
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.