aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l4_wkupTony Lindgren1-4/+7
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 mpussTony Lindgren2-6/+18
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 ocmcramTony Lindgren1-13/+23
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Note that we need to use "ti,no-idle" here. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 emifTony Lindgren1-7/+17
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 wkup_m3Tony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure interconnect target module for am4 wkup_m3Tony Lindgren2-18/+17
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Note that we no longer need ti,no-reset-on-init as the rstctrl resets are properly handled by the reset driver and claimed by the RTC driver. And we need to squash together the module ranges for driver compability. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure RTC powerdomain for am4Tony Lindgren1-0/+1
For genpd we need the RTC powerdomain configured. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 control moduleTony Lindgren1-0/+3
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. To drop the legacy platform data for am3 control module, we need to configure the missing functional clock and tag the module to not idle as platform data also had it configured with HWMOD_INIT_NO_IDLE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure also interconnect clocks for am4 system timerTony Lindgren1-0/+6
We now manage clocksource and clockevent clocks directly with timer-ti-dm-systimer. In order to use genpd with prm_omap, GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system timer related interconnect clocks enabled until clocksource suspend is done. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am43xx: add remaining PRM instancesTero Kristo1-0/+26
Add remaining PRM instances for the am43xx SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l3Tony Lindgren1-2/+4
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_perTony Lindgren1-5/+8
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_fastTony Lindgren1-2/+5
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkupTony Lindgren1-4/+7
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 mpussTony Lindgren2-6/+18
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 instrTony Lindgren1-6/+14
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 ocmcramTony Lindgren1-13/+23
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Note that we need to use "ti,no-idle" here. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 emifTony Lindgren1-7/+17
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 debugssTony Lindgren1-5/+14
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 and am4 gpmcTony Lindgren3-33/+65
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 wkup_m3Tony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure interconnect target module for am3 wkup_m3Tony Lindgren2-17/+14
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Note that we no longer need ti,no-reset-on-init as the rstctrl resets are properly handled by the reset driver and claimed by the RTC driver. And we need to squash together the module ranges for driver compability. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure RTC powerdomain for am3Tony Lindgren1-0/+1
For genpd we need the RTC powerdomain configured. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 control moduleTony Lindgren1-0/+3
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. To drop the legacy platform data for am3 control module, we need to configure the missing functional clock and tag the module to not idle as platform data also had it configured with HWMOD_INIT_NO_IDLE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure also interconnect clocks for am4 system timerTony Lindgren1-0/+6
We now manage clocksource and clockevent clocks directly with timer-ti-dm-systimer. In order to use genpd with prm_omap, GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system timer related interconnect clocks enabled until clocksource suspend is done. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am33xx: add remaining PRM instancesTero Kristo1-0/+20
Add remaining PRM instances for the am33xx SoC. Additionally, enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> [tony@atomide.com: fixed a typo for #power-domain-cells] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreenJonathan Neuschäfer1-1/+16
The Kobo Aura has an eKTF2132 touchscreen controller. Although the vendor kernel toggles a reset pin (GPIO5-12) during the startup sequence, the touchscreen works without it. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16ARM: dts: imx: Change flexcan node name to "can"Marc Kleine-Budde3-6/+6
Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with yaml schema, it requires the nodename to be "can". This fixes the following error found by dtbs_check: arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$' From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16ARM: dts: imx6q-pico: fix board compatiblesKrzysztof Kozlowski4-4/+4
There are four flavors of TechNexion PICO-IMX6 boards. They have their own DTSes, even though in Dwarf, Nymph and Pi are exactly the same. They also have their own bindings so adjust the compatibles to match the bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16arm: dts: aspeed: tiogapass: Enable second MACPaul Fertser1-0/+8
Tioga Pass reference design includes Intel I210 Ethernet controller connected to the BMC with NC/SI. MAC readout is not supported. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Vijay Khemka <vijaykhemkalinux@gmail.com> Tested-by: Vijay Khemka <vijaykhemkalinux@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-16ARM: dts: aspeed: minipack: Fixup I2C treeTao Ren1-0/+888
Create all the i2c switches in device tree and use aliases to assign child channels with consistent bus numbers. Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to avoid potential conflicts when multiple devices (beind the switches) use the same device address. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201110072446.8218-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-16ARM: dts: aspeed: wedge400: Fix FMC flash0 layoutTao Ren1-2/+2
Update "data0" partition's size from 8MB to 4MB to fix "partition data0 extends beyond the end of device" warning at bootup time. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201110072159.7941-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-15ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.Jonathan Cameron1-1/+0
This property applies to consumers of io-channels. In this case we have a provider so the property is not used. Recent changes to dt-schema result int his being reported as an error as a dependency is enforced between this property and io-channels. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-15ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3Łukasz Stelmach1-0/+4
Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103184412.18874-3-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-15ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3Łukasz Stelmach1-2/+2
Assign appropriate compatible properties matching real USB vendor and product ID. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103184412.18874-2-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-13ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150Rafał Miłecki1-0/+4
This device has a functional USB 3 port so PHY is required. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-13ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3Rafał Miłecki6-24/+0
It seems pointless to have it enabled. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-13Merge tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixesArnd Bergmann11-15/+10
Mostly some fixes for a fallout in a PHY driver that pointed out errors in our DTs. Along with that, Jernej agreed to be a reviewer! * tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixesArnd Bergmann3-8/+17
STM32 DT fixes for v5.10, round 2 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix TA3-GPIO-C button - Fix LED5 mapping - Define VIO regulator supply on DHCOM - Enable thermal sensor support on stm32mp15xx-dhcor - Keep VDDA LDO1 always on to avoid leakage * tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 Link: https://lore.kernel.org/r/65bfc73d-aae1-5309-2e11-1e3da647ad46@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid"Krzysztof Kozlowski1-1/+0
This reverts commit eaf2d2f6895d676dda6c95a652b58594f2887720. The commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3. It changes the order of clock drivers probe: the clkout (Exynos PMU) driver is probed before the main clk-exynos4 driver. The clkout driver on Exynos4412 depends on clk-exynos4 but it does not support deferred probe, therefore this dependency and changed probe order causes probe failure. The usb3503 USB hub on Odroid U3 on the other hand requires clkout clock. This can be seen in logs: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200921174818.15525-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann1-2/+2
i.MX fixes for 5.10, 3rd round: - A series from Krzysztof Kozlowski to fix missing PMIC's interrupt line pull-up for i.MX8MM and i.MX8MN boards. - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board to fix the choppy Bluetooth audio sound. - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN device tree. - Fix the endianness setting of RCPM node on Layerscape SoCs. - Add the missing dma-coherent property for qoriq-fman device to improve the performance. - Fix the Ethernet PHY address on imx6q-prti6q board. * tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: fix PHY address arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-12ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMCTao Ren2-0/+58
Add initial version of device tree for Facebook Galaxy100 (AST2400) BMC. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201111232330.30843-5-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-12ARM: dts: aspeed: wedge100: Use common dtsiTao Ren1-104/+14
Simplify the Wedge100 device tree by using the common dtsi. In addition this enables the second firmware flash, and turns on the "i2c-mux-idle-disconnect" flag for I2C switch 7-0070. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201111232330.30843-4-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-12ARM: dts: aspeed: wedge40: Use common dtsiTao Ren1-111/+1
Simplify the Wedge40 device tree by using the common dtsi. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201111232330.30843-3-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-12ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCsTao Ren1-0/+117
This common descirption is included by all Facebook AST2400 Network BMC platforms to minimize duplicated device entries across Facebook Network BMC device trees. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201111232330.30843-2-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-11ARM: dts: BCM5301X: Move CRU devices to the CRU nodeRafał Miłecki1-25/+26
Clocks and thermal blocks are part of the CRU ("Clock and Reset Unit" or "Central Resource Unit"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-11ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrlVivek Unune1-22/+4
Now that we have a pin controller, use that instead of manuplating the mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-11ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709xVivek Unune2-1/+10
BCM47094 version of pinmux uses different compatible and supports MDIO pinmux pins. Hence, use the correct compatible string and defines the MDIO pins group. Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-11ARM: dts: BCM5301X: Linksys EA9500 add fixed partitionsVivek Unune1-0/+41
This router has dual paritions to store trx firmware image and dual partitions for nvram. The second one in each of these cases acts as a backup store. When tested with OpenWrt, the default partition parser causes two issues: 1. It labels both nvram partitions as nvram. In factory, second one is labeled devinfo. 2. It parses second trx image and tries to create second 'linux' partition and fails with - cannot create duplicate 'linux' partition The following patch works around both of these issues. Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-11ARM: dts: BCM5310X: Harmonize xHCI DT nodes nameSerge Semin1-1/+1
In accordance with the Generic xHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.