aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-09-11ARM: dts: renesas: Fix pin controller node namesGeert Uytterhoeven19-19/+19
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200821112351.5518-1-geert+renesas@glider.be
2020-09-11ARM: dts: aspeed: Add Mowgli BMC platformBen Pai2-0/+663
The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server. Signed-off-by: Ben Pai <Ben_Pai@wistron.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909090818.24021-1-ben_pai@wistron.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10Merge tag 'tags/bcm2835-dt-next-2020-09-08' into devicetree/nextFlorian Fainelli2-1/+169
Maxime Ripard enables vc4 on BCM2711 (RPi4), which among other things adds HDMI functionality (no 4K yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: broadcom: Fix SP804 nodeAndre Przywara1-2/+2
The DT binding for SP804 requires to have an "arm,primecell" compatible string. Add this string so that the Linux primecell bus driver picks the device up and activates the clock. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> [florian: added compatible to ccbtimer1] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: NSP: Fix SP805 clock-namesAndre Przywara1-1/+1
The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for the Broadcom NSP platform to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: Cygnus: Fix SP805 clocksAndre Przywara1-2/+2
The SP805 DT binding requires two clocks to be specified, but the Broadcom Cygnus DT currently only specifies one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: NSP: replace status value "ok" by "okay"Adrian Schmutzler2-2/+2
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: BCM5301X: Add DT for Meraki MR32Christian Lamparter2-0/+198
add support for the Cisco Meraki MR32. This is a dual-band enterprise class 802.11ac access point. The unit was donated by Chris Blake. Thank you! SoC: Broadcom BCM53016A1 (1 GHz, 2 cores) RAM: 128 MiB NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable) ETH: 1GBit Ethernet Port - PoE WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352) WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352) WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428) BLE: Broadcom BCM20732 (ttyS1) LEDS: 1 x Programmable RGB Status LED (driven by a PWM) 1 x White LED (GPIO) 1 x Orange LED Fault Indicator (GPIO) 2 x LAN Activity / Speed LEDs (On the RJ45 Port) BUTTON: one Reset button MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC) ina219 hardware monitor (i2c) Kensington Lock SERIAL: WARNING: The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 115200-8-N-1. The board has a populated right angle 1x4 0.1" pinheader. The pinout is: VCC, RX, TX, GND. Odd stuff: - uart0 clock frequency is 62.5 MHz. - The LEDs are labeled as SYS-LED1 through SYS-LED3 because of the silkscreen on the PCB. - the original u-boot has been compiled with most functions and commands disabled. The u-boot env isn't setup properly either and as a result, the bcm47xxpart probing is not working. Hence, the nand partitions are specified through a "fixed-partition" binding. - The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is connected to uart2 of the SoC. The BCM20732 does not provide a HCI. So the linux' bluetooth stack is useless. The mock-up node with the compatible binding and enable-gpios property is provided solely as documentation. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10net: dsa: microchip: look for phy-mode in port nodesHelmut Grohne1-1/+1
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/ Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indicationLad Prabhakar1-0/+10
Add support for LED trigger on SD2 interface. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier boardLad Prabhakar1-0/+21
This patch enables CAN1 interface exposed through connector J20 on the carrier board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR supportLad Prabhakar1-0/+31
Add support for the SPI NOR device which is connected to MSIOF0 interface on the iWave RainboW-G21d-q7 board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742: Add VIN DT nodesLad Prabhakar1-0/+44
Add VIN[0123] instances found in the r8a7742 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20200907144509.8861-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: dra7: drop legacy cpsw dt nodeGrygorii Strashko2-56/+2
All dra7/am57 boards converted to use new driver, so drop legacy cpsw dt node. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drvGrygorii Strashko1-7/+6
Switch CompuLab CL-SOM-AM57x board to use new cpsw switch driver. Those board configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: dra7x-evm: switch to new cpsw switch drvGrygorii Strashko6-37/+35
Switch all TI DRA7x boards to use new cpsw switch driver. Those boards configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: beagle-x15: switch to new cpsw switch drvGrygorii Strashko1-7/+6
Switch all TI AM5728 BeagleBoard-X15 boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am57xx-idk: switch to new cpsw switch drvGrygorii Strashko4-42/+9
Switch all am571/2/4-idk boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am5729: beagleboneai: switch to new cpsw switch drvGrygorii Strashko1-5/+9
Switch BeagleBone AI to use new cpsw switch driver. It has one Ext. port only and fits dual_mac mode with no issues. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am43xx: replace status value "ok" by "okay"Adrian Schmutzler3-3/+3
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: dra7xx: replace status value "ok" by "okay"Adrian Schmutzler5-11/+11
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: omap: replace status value "ok" by "okay"Adrian Schmutzler29-51/+51
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: n9, n950: Remove nokia,nvm-size propertySakari Ailus2-2/+0
Remove nokia,nvm-size property as it is no longer needed. The driver can nowadays figure out the size so do not specify it in DT. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: rainier: Disable internal pull-downs on eMMC pinsAndrew Jeffery1-0/+4
There's a veritable tug-of-war going on in the design, so disable one of the warring parties. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200910031143.2997298-1-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-09ARM: dts: BCM5301X: Fixed QSPI compatible stringFlorian Fainelli1-1/+1
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-09ARM: dts: NSP: Fixed QSPI compatible stringFlorian Fainelli1-1/+1
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-09ARM: dts: bcm: HR2: Fixed QSPI compatible stringFlorian Fainelli1-1/+1
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-09ARM: dts: s5pv210: align SPI GPIO node name with dtschema in AriesKrzysztof Kozlowski1-1/+1
The device tree schema expects SPI controller to be named "spi", otherwise dtbs_check complain with a warning like: spi-gpio-0: $nodename:0: 'spi-gpio-0' does not match '^spi(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-25-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for IRQ flags in GoniKrzysztof Kozlowski1-1/+2
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-20-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for IRQ flags in SMDKV210Krzysztof Kozlowski1-1/+2
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-19-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for GPIO flags in GoniKrzysztof Kozlowski1-9/+10
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-18-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for GPIO flags in AquilaKrzysztof Kozlowski1-6/+7
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-17-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in TorbreckKrzysztof Kozlowski1-0/+9
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-16-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in SMDKV210Krzysztof Kozlowski1-0/+9
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-15-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in SMDKC110Krzysztof Kozlowski1-0/+9
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-14-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in GoniKrzysztof Kozlowski1-0/+17
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However there is no such clock provider but rather a regulator driver which registers the clock as a regulator. This is an old driver which will not be updated so add a workaround - a fixed-clock to fill missing clock phandle reference in S3C RTC. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-13-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in Aries familyKrzysztof Kozlowski1-0/+12
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However there is no such clock provider but rather a regulator driver which registers the clock as a regulator. This is an old driver which will not be updated so add a workaround - a fixed-clock to fill missing clock phandle reference in S3C RTC. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-12-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in AquillaKrzysztof Kozlowski1-0/+17
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However there is no such clock provider but rather a regulator driver which registers the clock as a regulator. This is an old driver which will not be updated so add a workaround - a fixed-clock to fill missing clock phandle reference in S3C RTC. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-11-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: remove dedicated 'audio-subsystem' nodeKrzysztof Kozlowski1-36/+29
The 'audio-subsystem' node is an artificial creation, not representing real hardware. The hardware is described by its nodes - AUDSS clock controller and I2S0. Remove the 'audio-subsystem' node along with its undocumented compatible to fix dtbs_check warnings like: audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-9-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: move PMU node out of clock controllerKrzysztof Kozlowski1-8/+5
The Power Management Unit (PMU) is a separate device which has little common with clock controller. Moving it to one level up (from clock controller child to SoC) allows to remove fake simple-bus compatible and dtbs_check warnings like: clock-controller@e0100000: $nodename:0: 'clock-controller@e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-8-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: move fixed clocks under root nodeKrzysztof Kozlowski1-22/+14
The fixed clocks are kept under dedicated 'external-clocks' node, thus a fake 'reg' was added. This is not correct with dtschema as fixed-clock binding does not have a 'reg' property. Moving fixed clocks out of 'soc' to root node fixes multiple dtbs_check warnings: external-clocks: $nodename:0: 'external-clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' external-clocks: #size-cells:0:0: 0 is not one of [1, 2] external-clocks: oscillator@0:reg:0: [0] is too short external-clocks: oscillator@1:reg:0: [1] is too short external-clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-7-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warningsKrzysztof Kozlowski1-28/+21
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: fix pinctrl property of "vibrator-en" regulator in AriesKrzysztof Kozlowski1-1/+1
Fix typo in pinctrl property of "vibrator-en" fixed regulator in Aries family of boards. The error caused lack of pin configuration for the GPIO used in vibrator. Fixes: 04568cb58a43 ("ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-5-krzk@kernel.org
2020-09-09arm: dts: mt7623: add lima related regulatorAlex Ryabchenko1-1/+12
GPU needs additional regulator, add it to devicetree of bpi-r2 Signed-off-by: Alex Ryabchenko <d3adme4t@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20200904110002.88966-5-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-09arm: dts: mt7623: add display subsystem related device nodesRyder Lee3-0/+316
Add display subsystem related device nodes for MT7623. Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://lore.kernel.org/r/20200904110002.88966-4-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-09arm: dts: mt7623: move display nodes to separate mt7623n.dtsiFrank Wunderlich4-125/+136
mt7623a has no graphics support so move nodes from generic mt7623.dtsi to mt7623n.dtsi Fixes: 1f6ed2245946 ("arm: dts: mt7623: add Mali-450 device node") Suggested-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20200904110002.88966-3-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-09ARM: aspeed: g5: Do not set sirq polarityJoel Stanley1-1/+0
A feature was added to the aspeed vuart driver to configure the vuart interrupt (sirq) polarity according to the LPC/eSPI strapping register. Systems that depend on a active low behaviour (sirq_polarity set to 0) such as OpenPower boxes also use LPC, so this relationship does not hold. Jeremy confirms that the s2600st which is strapped for eSPI also does not have this relationship. The property was added for a Tyan S7106 system which is not supported in the kernel tree. Should this or other systems wish to use this feature of the driver they should add it to the machine specific device tree. Fixes: c791fc76bc72 ("arm: dts: aspeed: Add vuart aspeed,sirq-polarity-sense...") Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Jeremy Kerr <jk@ozlabs.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200812112400.2406734-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-09ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C deviceEddie James1-0/+7
Set I2C bus 7 to multi-master mode and add the panel device that will register as a slave. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200908200101.64974-6-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-09ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C deviceEddie James1-0/+7
Set I2C bus 0 to multi-master mode and add the panel device that will register as a slave. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200908200101.64974-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-08ARM: dts: bcm2711: Enable the display pipelineMaxime Ripard2-1/+169
Now that all the drivers have been adjusted for it, let's bring in the necessary device tree changes. The VEC and PV3 are left out for now, since it will require a more specific clock setup. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/cfce2276d172d3d9c4d34d966b58fd47f77c4e46.1599120059.git-series.maxime@cerno.tech
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.