aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-09-07ARM: dts: ste-href: Add reg property to the LP5521 channel nodesDan Murphy1-6/+16
Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200812195020.13568-7-dmurphy@ti.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-07ARM: dts: arm: Fix SP805 clocksAndre Przywara9-13/+13
The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for ARM Ltd. platforms to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. For MPS2 we only specify one clock so far, but the binding requires two clocks to be named. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. So since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Link: https://lore.kernel.org/r/20200828130602.42203-8-andre.przywara@arm.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-09-07ARM: dts: arm: Fix SP804 usersAndre Przywara3-12/+14
The SP804 DT nodes for Realview, MPS2 and VExpress were not complying with the binding: it requires either one or three clocks, but does not allow exactly two clocks. Simply duplicate the first clock to satisfy the binding requirement. For MPS2, we triple the clock, and add the clock-names property, as this is required by the Linux primecell driver. Try to make the clock-names more consistent on the way. Link: https://lore.kernel.org/r/20200828142018.43298-3-andre.przywara@arm.com Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-09-06ARM: dts: exynos: Silence SATA PHY warning in Exynos5250Krzysztof Kozlowski3-10/+14
The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes: 1. sata-phy@12170000 2. i2c-9/i2c@38 The first node represents the actual SATA PHY device with phy-cells. The second represents an additional I2C interface, needed by the driver to communicate with the SATA PHY device. It is not a PHY-provider in the terms of dtschema so rename it to silence dtbs_check warning: arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml This second device node is also a property of SoC, not a board so move it there. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902155733.20271-2-krzk@kernel.org
2020-09-06ARM: dts: exynos: Remove I2C9 samsung, i2c-slave-addr from Exynos5250 boardsKrzysztof Kozlowski2-2/+0
The property samsung,i2c-slave-addr in I2C9 controller on Exynos5250 Arndale and SMDK5250 boards, is not actually needed. There is only one master on this bus. It's not clear why this property was added at first place. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200902155733.20271-1-krzk@kernel.org
2020-09-06ARM: dts: samsung: odroid-xu3: Move assigned-clock* properties to i2s0 nodeSylwester Nawrocki1-33/+27
The purpose of those assigned-clock-* properties is to configure clock for for the I2S device so move them to respective node. This suppresses the dtbs_check warning: arch/arm/boot/dts/exynos5422-odroidxu3.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks' Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-05ARM: dts: imx28-m28: Align GPMI NAND node name with schemaKrzysztof Kozlowski1-1/+1
Device tree schema expects NAND controller to be named "nand-controller", otherwise dtbs_check complain with a warning like: arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dt.yaml: gpmi-nand@8000c000: $nodename:0: 'gpmi-nand@8000c000' does not match '^nand-controller(@.*)?' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-05ARM: dts: imx6qdl: add enet_out clk supportMarco Felsch1-1/+2
Like the other i-MX devices the i.MX6 family can output the enet tx clock on the pad to feed the connected device. Add the missing clk here to avoid local fixups like: arch/arm/boot/dts/imx6qdl-tx6.dtsi. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-05ARM: dts: imx6qdl: move iomuxc compatible assignment out of root nodeMarco Felsch2-8/+8
The common imx6qdl.dtsi already defines the iomuxc phandle. Make use of it in the imx6dl.dtsi and imx6q.dtsi. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-05ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1Krzysztof Kozlowski1-0/+1
The PCA95xx GPIO expander requires GPIO controller properties to operate properly. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-05ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3Fugang Duan1-1/+1
The pad QSPI1B_SCLK mux mode 0x1 is for function UART3_DTE_TX, correct the mux mode. Fixes: 743636f25f1d ("ARM: dts: imx: add pin function header for imx6sx") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-05ARM: dts: imx: add devicetree for Tolino Shine 2 HDAndreas Kemnade2-0/+589
This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL SoC. Expected to work: - Buttons - Wifi - Touchscreen - LED - uSD - USB - RTC Not working due to missing drivers: - Backlight (requires NTXEC driver) - EPD Not working due to unknown reasons: - deep sleep (echo standby >/sys/power/state works), wakeup fails when imx_gpc_pre_suspend(true) was called. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-04ARM: dts: r8a7742: Add IPMMU DT nodesLad Prabhakar1-0/+48
Add the five IPMMU instances found in the r8a7742 to DT with a disabled status. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200825141805.27105-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420Krzysztof Kozlowski1-0/+3
Use the 32 kHz clock from S2MPS11 PMIC in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clocks: [[2, 317]] is too short arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-14-krzk@kernel.org
2020-09-04ARM: dts: r8a7742-iwg21d-q7: Enable PCIe ControllerLad Prabhakar1-0/+12
Enable PCIe Controller and set PCIe bus clock frequency. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200825162718.5838-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-04ARM: dts: r8a7742: Add IPMMU DT nodesLad Prabhakar1-0/+48
Add the five IPMMU instances found in the r8a7742 to DT with a disabled status. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200825141805.27105-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-03ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 SpringKrzysztof Kozlowski1-1/+1
The pin configuration of Display Port HPD GPIO emds with '-gpio' which confuses dtschema: arch/arm/boot/dts/exynos5250-spring.dt.yaml: pinctrl@11400000: dp-hpd-gpio: {'samsung,pins': ['gpc3-0'], ... 'samsung,pin-drv': [[0]], 'phandle': [[23]]} is not of type 'array' From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-11-krzk@kernel.org
2020-09-03ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 SpringKrzysztof Kozlowski1-1/+8
Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-10-krzk@kernel.org
2020-09-03ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250Krzysztof Kozlowski1-1/+5
Add clock-cells to max77686 PMIC node so its 32 kHz clocks could be used later in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-9-krzk@kernel.org
2020-09-03ARM: dts: exynos: Override thermal by label in Exynos5250Krzysztof Kozlowski1-20/+18
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-8-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5Krzysztof Kozlowski8-48/+48
Remove double space after '=' and fix indentation in Exynos5250, Exynos5410 and Exynos5420 DTS files. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-7-krzk@kernel.org
2020-09-03ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 ArndaleKrzysztof Kozlowski1-1/+1
The name of I2C controller over GPIO lines node ends with '-gpio' which confuses dtschema: arch/arm/boot/dts/exynos5250-arndale.dt.yaml: soc: i2c-gpio: {'pinctrl-names': ['default'], ... 'phandle': [[65]]} is not of type 'array' From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml Add a '-10' (there are already 0-9 I2C controllers on the SoC) suffix to silence it. This pattern on naming i2c-gpio is already present in many other dts. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-6-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410Krzysztof Kozlowski1-0/+12
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes S3C RTC and silences dtbs_check warnings like: arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clocks: [[5, 317]] is too short arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-5-krzk@kernel.org
2020-09-03ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GICKrzysztof Kozlowski1-2/+0
The Exynos5260 GIC node does not have any children so remove the address and size cells as they are not needed by DT bindings. The size-cells of '0' were also incorrect. This fixes dtbs_check warning: arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000: #size-cells:0:0: 1 was expected Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-4-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct compatible for Exynos5260 GICKrzysztof Kozlowski1-1/+1
Exynos5260 SoCs have ARM GIC 400. Correct the compatibles to match dtschema and fix the dtbs_check warnings like: arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000: compatible: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is not valid under any of the given schemas Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-3-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct compatible for Exynos5 GICKrzysztof Kozlowski1-1/+1
Exynos5250 and Exynso54xx SoCs have ARM GIC 400. Correct the compatibles to match dtschema and fix the dtbs_check warnings like: arch/arm/boot/dts/exynos5420-peach-pit.dt.yaml: interrupt-controller@10481000: compatible: ['arm,gic-400', 'arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is not valid under any of the given schemas Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-2-krzk@kernel.org
2020-09-03Merge branch 'omap-for-v5.10/prm-genpd' into omap-for-v5.10/ti-sysc-drop-pdataTony Lindgren6-4/+24
2020-09-03arm/boot: Warn on orphan section placementKees Cook1-0/+2
We don't want to depend on the linker's orphan section placement heuristics as these can vary between linkers, and may change between versions. All sections need to be explicitly handled in the linker script. With all sections now handled, enable orphan section warning. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20200902025347.2504702-4-keescook@chromium.org
2020-09-03ARM: dts: at91: fix sram nodesAlexandre Belloni14-0/+55
The ranges, #address-cells and #size-cells properties are mandatory, add them to the sram nodes. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-4-alexandre.belloni@bootlin.com
2020-09-03ARM: dts: at91: fix cpu nodeAlexandre Belloni9-18/+27
The reg property is mandatory for cpu nodes, also fix the #address-cells of the cpus node that has to be at least 1. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-2-alexandre.belloni@bootlin.com
2020-09-02ARM: dts: s5pv210: Enable audio on Aries boardsJonathan Bakker3-0/+193
Both the Galaxy S and the Fascinate4G have a WM8994 codec, but they differ slightly in their jack detection and micbias configuration. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-02ARM: dts: exynos: Correct whitespace and indentation issuesKrzysztof Kozlowski8-77/+77
Remove double space after '=' and fix indentation in Exynos3250, Exynos4210 and Exynos4412 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-33-krzk@kernel.org
2020-09-02ARM: dts: exynos: Correct S3C RTC bindings in Tiny4412Krzysztof Kozlowski1-0/+9
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with fixed-clock. This fixes S3C RTC and silences dtbs_check warnings like: arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-32-krzk@kernel.org
2020-09-02ARM: dts: exynos: Correct S3C RTC bindings in SMDK4412Krzysztof Kozlowski1-0/+12
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with fixed-clock and silence dtbs_check warnings like: arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-31-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in Tiny4412Krzysztof Kozlowski1-0/+15
Add missing cooling devices for CPU thermal zones in Exynos4412 Tiny4412 board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-30-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in SMDK4412Krzysztof Kozlowski1-0/+15
Add missing cooling devices for CPU thermal zones in Exynos4412 SMDK4412 board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-29-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in Exynos4412 OrigenKrzysztof Kozlowski1-0/+15
Add missing cooling devices for CPU thermal zones in Exynos4412 Origen board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-28-krzk@kernel.org
2020-09-02ARM: dts: exynos: Override thermal by label in Exynos4412 OdroidsKrzysztof Kozlowski2-44/+36
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-27-krzk@kernel.org
2020-09-02ARM: dts: exynos: Override thermal by label in MidasKrzysztof Kozlowski1-19/+15
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-26-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add S5M8767 clocks for RTC in Exynos4412 OrigenKrzysztof Kozlowski1-0/+10
Add node for clock controller of Samsung S5M8767 PMIC. This provides the 32768 Hz clock required by S3C RTC. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos4412-origen.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short arch/arm/boot/dts/exynos4412-origen.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-25-krzk@kernel.org
2020-09-02ARM: dts: exynos: Correct compatible of fixed clocks in Midas boardsKrzysztof Kozlowski1-2/+2
The fixed clocks implemented by Samsung clock drivers use only one compatible so drop the additional "fixed-clock" to fix dtbs_check warnings like: arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible:0: 'fixed-clock' was expected From schema: Documentation/devicetree/bindings/clock/fixed-clock.yaml arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: ['samsung,clock-xxti', 'fixed-clock'] is too long arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: Additional items are not allowed ('fixed-clock' was unexpected) arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: '#clock-cells' is a required property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-24-krzk@kernel.org
2020-09-02ARM: dts: exynos: Align MHL GPIO pin configuration with dtschema on Galaxy I9100Krzysztof Kozlowski1-1/+1
Align the name of mag-mhl-gpio node to avoid dtschema confusion and dtbs_check warning: arch/arm/boot/dts/exynos4210-i9100.dt.yaml: pinctrl@11000000: mag-mhl-gpio: {'samsung,pins': ['gpd0-2'], 'samsung,pin-function': [[3]], 'samsung,pin-pud': [[0]]} is not of type 'array' From schema: dtschema/schemas/gpio/gpio-consumer.yaml Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-22-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in Universal C210Krzysztof Kozlowski1-0/+13
Add missing cooling devices for CPU thermal zones in Exynos4210 Universal C310 board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-21-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in SMDKv310Krzysztof Kozlowski1-0/+13
Add missing cooling devices for CPU thermal zones in Exynos4210 SMDKv310 board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-20-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in Exynos4210 OrigenKrzysztof Kozlowski1-0/+13
Add missing cooling devices for CPU thermal zones in Exynos4210 Origen board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-19-krzk@kernel.org
2020-09-02ARM: dts: exynos: Override thermal by label in TratsKrzysztof Kozlowski1-16/+13
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-18-krzk@kernel.org
2020-09-02ARM: dts: exynos: Override thermal by label in Galaxy I9000Krzysztof Kozlowski1-15/+13
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-17-krzk@kernel.org
2020-09-02ARM: dts: exynos: Override thermal by label in Exynos4210Krzysztof Kozlowski1-18/+16
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-16-krzk@kernel.org
2020-09-02ARM: dts: exynos: Align SPI GPIO node name with dtschema in Galaxy I9100Krzysztof Kozlowski1-1/+1
The device tree schema expects SPI controller to be named "spi", otherwise dtbs_check complain with a warning like: arch/arm/boot/dts/exynos4210-i9100.dt.yaml: spi-lcd: $nodename:0: 'spi-lcd' does not match '^spi(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-15-krzk@kernel.org
2020-09-02ARM: dts: exynos: Replace deprecated GPIO spi-gpio properties in Universal C210Krzysztof Kozlowski1-2/+2
"gpio-sck" and "gpio-mosi" are deprecated so update the DTS to fix dtbs_checks warnings like: arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: spi-lcd: gpio-sck: False schema does not allow [[85, 1, 0]] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200830135200.24304-14-krzk@kernel.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.