aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-01-09ARM: dts: stm32: Add power-supply for RGB panel on stm32429i-evalBenjamin Gaignard1-0/+8
Add a fixed regulator and use it as power supply for RBG panel. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-discoBenjamin Gaignard1-0/+8
Add a fixed regulator and use it as power supply for DSI panel. Fixes: 18c8866266 ("ARM: dts: stm32: Add display support on stm32f469-disco") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: change nvmem node name on stm32mp1Benjamin Gaignard1-1/+1
Change non volatile node name from nvmem to efuse to be compliant with yaml schema. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: change nvmem node name on stm32f429Benjamin Gaignard1-1/+1
Change non volatile node name from nvmem to efuse to be compliant with yaml schema. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: update mlahb node according to the bindings on stm32mp15Arnaud Pouliquen1-2/+3
Update of the mlahb node according to to DT bindings using json-schema Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: fix dma controller node name on stm32mp157cBenjamin Gaignard1-3/+3
Modify dma controller nodes name to fit with the standard naming. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: fix dma controller node name on stm32f743Benjamin Gaignard1-3/+3
Modify dma controller nodes name to fit with the standard naming. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: fix dma controller node name on stm32f746Benjamin Gaignard1-2/+2
Modify dma controller nodes name to fit with the standard naming. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1Amelie Delaunay1-0/+1
phy-names is required by usbotg_hs driver to get the phy, otherwise, it considers that there is no phys property. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: enable USB OTG HS on stm32mp15 DKx boardsAmelie Delaunay1-0/+7
This patch enables USB OTG HS on stm32mp15 dkx in Peripheral mode. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: enable USB Host (USBH) EHCI controller on stm32mp15 DKxAmelie Delaunay1-0/+5
This patch enables USB Host (USBH) EHCI controller on stm32mp15 dk boards. As a hub is used between USBH and USB connectors, no need to enable USBH OHCI controller: all low- and full-speed traffic is managed by the hub. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: stm32: enable USBPHYC on stm32mp15 DKx boardsAmelie Delaunay1-0/+16
This patch enables USBPHYC (USB PHY Controller on stm32mp15 DKx boards. This enables the two usbphyc usb2 ports, which require 3 supplies: 3v3, 1v1 and 1v8. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-01-09ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash supportMarcel Ziswiler1-0/+4
Turns out when introducing the eMMC version the gpmi node required for NAND flash support got enabled exclusively on Colibri iMX7D 512MB. Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" propertyFabio Estevam1-0/+1
imx6ul-14x14-evk does not have a GPIO dedicated for reading the card detect pin on the eSDHC2 micro-SD port. Pass the "broken-cd" property to describe the absence of the card detect GPIO so that polling must be used. According to Documentation/devicetree/bindings/mmc/mmc-controller.yaml: broken-cd: $ref: /schemas/types.yaml#/definitions/flag description: There is no card detection available; polling must be used. Even though no error is oberved in the kernel, the lack of the 'broken-cd' property caused the micro-SD to not be detected in U-Boot, so let's improve the device tree description to make it more accurate. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sl-tolino-shine3: Remove incorrect power supply assignmentAnson Huang1-4/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sll-evk: Remove incorrect power supply assignmentAnson Huang1-4/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 96a9169cf621 ("ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sl-evk: Remove incorrect power supply assignmentAnson Huang1-4/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 3feea8805d6f ("ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sx-sdb: Remove incorrect power supply assignmentAnson Huang2-8/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 37a4bdead109 ("ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignmentAnson Huang1-4/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx7d-pico: Add LCD supportFabio Estevam1-0/+90
Add support for the VXT VL050-8048NT-C01 panel connected through the 24 bit parallel LCDIF interface. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DLJagan Teki1-1/+1
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on the 1.5 version of the i.Core MX6 cpu module. The 1.5 version differs from the original one for a few details, including the ethernet PHY interface clock provider. With this commit, the ethernet interface works properly: SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver While before using the 1.5 version, ethernet failed to startup do to un-clocked PHY interface: fec 2188000.ethernet eth0: could not attach to PHY Similar fix has merged for i.Core MX6Q but missed to update for DL. Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support") Cc: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6qdl-icore: Add fec phy-handleMichael Trimarchi1-1/+14
LAN8720 needs a reset of every clock enable. The reset needs to be done at device level, due the flag PHY_RST_AFTER_CLK_EN. So, add phy-handle by creating mdio child node inside fec. This will eventually move the phy-reset-gpio which is defined in fec node. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methodsMichael Trimarchi1-2/+0
Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio and phy-mode properties. So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file. Cc: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx7: Unify temp-grade and speed-grade nodesFabio Estevam2-8/+3
The following warning is seen when building with W=1: arch/arm/boot/dts/imx7s.dtsi:551.39-553.7: Warning (unique_unit_address): /soc/aips-bus@30000000/ocotp-ctrl@30350000/temp-grade@10: duplicate unit-address (also used in node /soc/aips-bus@30000000/ocotp-ctrl@30350000/speed-grade@10) Since temp-grade and speed-grade point to the same node, replace them by a single one to avoid the duplicate unit-address warning. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6: phycore-som: add pmic onkey deviceMarco Felsch1-0/+4
Without the onkey device it isn't possible to power off the system using the X_PMIC_nONKEY signal which is routed to the SoM pin header. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: rockchip: Use ABI name for recovery mode pin on veyron fievel/tigerMatthias Kaehlcke1-1/+5
The recovery mode pin is currently named 'REC_MODE_L', which is how the signal is called in the schematics. The Chrome OS ABI requires the pin to be named 'RECOVERY_SW_L', which is also how it is called on all other veyron devices. Rename the pin to match the ABI. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200108092908.1.I3afd3535b65460e79f3976e9ebfa392a0dd75e01@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-08ARM: dts: exynos: Enable FIMD node and add proper panel node to Tiny4412Yangtao Li1-0/+25
Enable fimd device node which is a display controller, and add panel node required by it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-01-08ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPPMartin Blumenstingl1-2/+2
The clock setup on Meson8 cannot achieve a Mali frequency of exactly 182.15MHz. The vendor driver uses "FCLK_DIV7 / 1" for this frequency, which translates to 2550MHz / 7 / 1 = 364285714Hz. Update the GPU operating point to that specific frequency to not confuse myself when comparing the frequency from the .dts with the actual clock rate on the system. Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-01-08ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPPMartin Blumenstingl1-2/+2
The clock setup on Meson8 cannot achieve a Mali frequency of exactly 182.15MHz. The vendor driver uses "FCLK_DIV7 / 2" for this frequency, which translates to 2550MHz / 7 / 2 = 182142857Hz. Update the GPU operating point to that specific frequency to not confuse myself when comparing the frequency from the .dts with the actual clock rate on the system. Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-01-08ARM: dts: meson8b: fix the clock controller compatible stringMartin Blumenstingl1-1/+1
The Meson8b clock controller is an evolution of the Meson8 clock controller. The clock controller on Meson8b contains two identical mali clock trees for glitch-free rate switching. Use the correct compatible string to make use of the glitch free mux. Fixes: b6db3936f2833c ("ARM: dts: meson: switch the clock controller to the HHI register area") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-01-08Merge tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/fixesOlof Johansson3-785/+26
ASPEED device tree fixes for 5.5 Fixes for some badly applied patches that went in to 5.5. There is also a fix for an incorrect i2c address. * tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location Link: https://lore.kernel.org/r/CACPK8XcjazgORXNZBU1ECMukXG4HA8D9VeDxiSPifDk_iB7_dw@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08Merge tag 'tags/bcm2835-dt-next-2020-01-07' into devicetree/nextFlorian Fainelli3-10/+8
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-08ARM: dts: armada-388-clearfog: add eepromBaruch Siach1-0/+6
SolidRun Clearfog Pro rev 2.1 and Clearfog Base rev 1.3 added EEPROM. Add DT node for EEPROM description in the .dtsi shared by Clearfog Pro and Base. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-01-08ARM: dts: armada-38x-solidrun-microsom: add eepromBaruch Siach1-0/+6
SolidRun Armada 38x SOM rev 2.1 added EEPROM. Add DT node for EEPROM description. Cc: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-01-08ARM: armada-38x-solidrun-microsom: move i2c0 to SOM DTBaruch Siach3-10/+7
Move the i2c0 controller properties to the SOM .dtsi. This is preparation for adding an i2c device at the SOM level. Cc: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-01-08ARM: dts: mvebu: add support for SolidRun Clearfog GTRBaruch Siach4-0/+646
SolidRun Clearfog GTR L8 and S4 SBCs are based on Armada 385. They features 8 (L8) or 4 (S4) switched Ethernet ports, 1 1Gb Ethernet port, 1 directly connected SFP port, 1 SFP port behind the switch (not currently described in DT), 3 mini-PCIe slots, eMMC, SPI flash, USB3 port. https://developer.solid-run.com/products/clearfog-gtr-a385/ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-01-08ARM: dts: aspeed: rainier: Fix fan fault and presenceBrandon Wyman1-2/+2
The PCA9552 used for fan fault and presence information is at address 61h, not 60h. Fixes: 2efc118ce3c3 ("ARM: dts: aspeed: rainier: Add i2c devices") Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: rainier: Remove duplicate i2c bussesJoel Stanley1-365/+0
This is a revert of "ARM: dts: aspeed: rainier: Add i2c devices", which was already applied to the tree. Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices") Reviewed-by: Jim Wright <wrightj@linux.vnet.ibm.com> Tested-by: Jim Wright <wrightj@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Remove duplicate flash nodesJoel Stanley1-31/+0
This is a revert of "ARM: dts: aspeed: tacoma: Enable FMC and SPI devices" which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 8737481e381c ("ARM: dts: aspeed: tacoma: Enable FMC and SPI devices") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Remove duplicate i2c bussesJoel Stanley1-367/+0
This is a revert of "ARM: dts: aspeed: tacoma: Enable I2C busses", which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 606bcdde6724 ("ARM: dts: aspeed: tacoma: Enable I2C busses") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Fix fsi master nodeJoel Stanley1-0/+5
This was broken when applying "ARM: dts: aspeed: tacoma: Add host FSI description". Fixes: a981c93300ef ("ARM: dts: aspeed: tacoma: Add host FSI description") Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed-g6: Fix FSI master locationJoel Stanley1-20/+19
The FIS nodes were placed incorrectly in the device tree. Fixes: 0fe4e304782c ("ARM: dts: aspeed-g6: Describe FSI masters") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-07ARM: dts: rockchip: Use ABI name for write protect pin on veyron fievel/tigerMatthias Kaehlcke1-1/+5
The flash write protect pin is currently named 'FW_WP_AP', which is how the signal is called in the schematics. The Chrome OS ABI requires the pin to be named 'AP_FLASH_WP_L', which is also how it is called on all other veyron devices. Rename the pin to match the ABI. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200106135142.1.I3f99ac8399a564c88ff48ae6290cc691b47c16ae@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-07ARM: dts: samsung: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski15-29/+29
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-01-07Merge tag 'omap-for-v5.6/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dtOlof Johansson13-121/+0
Drop more legacy platform data for omaps for v5.6 merge window We can now probe devices with ti-sysc interconnect driver and dts data, and can continue dropping the related platform data and custom ti,hwmods dts property for various devices. And related to that, we finally can remove the legacy sdma support in favor of using the dmaengine driver only. I was planning to send the sdma changes separately, but that would have produced a pile of pointless merge conflicts, so I decided it's best to resolve it locally. After all, the sdma series also ends up removing the related platform data. Note that this series is based on omap-for-v5.6/ti-sysc-dt-signed branch as it depends for dts data being in place. * tag 'omap-for-v5.6/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (56 commits) ARM: OMAP2+: Drop legacy platform data for sdma ARM: OMAP2+: Drop legacy init for sdma dmaengine: ti: omap-dma: Use cpu notifier to block idle for omap2 dmaengine: ti: omap-dma: Allocate channels directly dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it dmaengine: ti: omap-dma: Configure global priority register directly ARM: OMAP5: hwmod-data: remove OMAP5 IOMMU hwmod data ARM: OMAP4: hwmod-data: remove OMAP4 IOMMU hwmod data ARM: OMAP2+: Drop legacy platform data for omap4 fdif ARM: OMAP2+: Drop legacy platform data for omap4 slimbus ARM: OMAP2+: Drop legacy platform data for omap5 kbd ARM: OMAP2+: Drop legacy platform data for omap4 kbd ARM: OMAP2+: Drop legacy platform data for dra7 smartreflex ARM: OMAP2+: Drop legacy platform data for omap4 smartreflex ARM: OMAP2+: Drop legacy platform data for omap4 hsi ARM: OMAP2+: Drop legacy platform data for am4 vpfe ARM: OMAP2+: Drop legacy platform data for dra7 ocp2scp ARM: OMAP2+: Drop legacy platform data for omap5 ocp2scp ARM: OMAP2+: Drop legacy platform data for omap4 ocp2scp ARM: OMAP2+: Drop legacy platform data for am4 ocp2scp ... Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-4 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-07Merge tag 'omap-for-v5.6/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dtOlof Johansson17-183/+597
dts changes for omaps for ti-sysc driver for v5.6 merge window Devicetree changes for omaps to configure more devices to probe with ti-sysc interconnect target module: - Configure am4 qspi - Configure aes, des and sham accelerators for am3, 4 and dra7 - Configure iommus for omap4, 5 and dra7 - Add a generic compatible for sdma, and configure omap2 and 3 sdma * tag 'omap-for-v5.6/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (24 commits) ARM: dts: omap5: convert IOMMUs to use ti-sysc ARM: dts: omap4: convert IOMMUs to use ti-sysc ARM: dts: dra74x: convert IOMMUs to use ti-sysc ARM: dts: dra7: convert IOMMUs to use ti-sysc ARM: dts: Configure interconnect target module for dra7 des ARM: dts: Configure interconnect target module for am4 des ARM: dts: Configure interconnect target module for dra7 aes ARM: dts: Configure interconnect target module for am4 aes ARM: dts: Configure interconnect target module for am3 aes ARM: dts: Configure interconnect target module for dra7 sham ARM: dts: Configure interconnect target module for am4 sham ARM: dts: Configure interconnect target module for am3 sham ARM: dts: Configure interconnect target module for am4 qspi ARM: dts: Configure interconnect target module for omap3 sdma ARM: dts: Configure interconnect target module for omap2 sdma ARM: dts: Add generic compatible for omap sdma instances bus: ti-sysc: Fix iterating over clocks ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap bus: ti-sysc: Fix missing reset delay handling ARM: dts: am437x-gp/epos-evm: fix panel compatible ... Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-3 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-07Merge tag 'omap-for-v5.6/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dtOlof Johansson6-54/+164
Devicetree changes for omaps for v5.6 merge window Devicetree changes for omaps for v5.6 to configure more devices and update boards to use generic lcd panels: - Configure HDMI for dra76-evm and am57xx-idk - Correct node name for am3517 mdio - Convert am335x-evm, am335x-evmsk, and am335x-icev2 to use generic panels * tag 'omap-for-v5.6/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0 ARM: dts: am335x-evmsk: Use drm simple-panel instead of tilcdc-panel ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel ARM: dts: omap3: name mdio node properly ARM: dts: am57xx-idk-common: add HDMI to the common dtsi ARM: dts: dra76-evm: add HDMI output Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-2 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-07Merge tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixesOlof Johansson3-13/+22
Fixes for omaps for v5.5-rc cycle Here are few fixes for v5.5-rc cycle: - Two corner case fixes related to ti-sysc driver clock issues - Fixes for am57xx dts for pcie gpios - Beagle-x15 regulator dts fix - Fix for wkup_m3_ipc driver race * tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot ARM: dts: beagle-x15-common: Model 5V0 regulator ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes bus: ti-sysc: Fix iterating over clocks ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap Link: https://lore.kernel.org/r/pull-1578418121-413328@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-07ARM: dts: bcm2711: Enable HWRNG supportStephen Brennan1-4/+2
This enables hardware random number generator support for the BCM2711 on the Raspberry Pi 4 board. Signed-off-by: Stephen Brennan <stephen@brennan.io> Acked-by: Stefan Wahren <wahrenst@gmx.net> [nsaenzjulienne@suse.de: remove unnecessary status="okay"] Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
2020-01-07ARM: dts: bcm2835: Move rng definition to common locationStephen Brennan2-6/+6
BCM2711 inherits from BCM283X, but has an incompatible HWRNG. Move this node to bcm2835-common.dtsi, so that BCM2711 can define its own. Signed-off-by: Stephen Brennan <stephen@brennan.io> Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.