aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2019-12-17ARM: OMAP2+: Drop legacy platform data for am4 desTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for dra7 aesTony Lindgren1-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for am3 and am4 aesTony Lindgren2-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for dra7 shamTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for am3 and am4 shamTony Lindgren2-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap5 mcpdmTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap5 dmicTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap4 mcpdmTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap4 dmicTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap4 aessTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for am4 qspiTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for dra7 desTony Lindgren2-11/+32
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 desTony Lindgren1-7/+28
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for dra7 aesTony Lindgren1-14/+56
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 aesTony Lindgren1-7/+28
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am3 aesTony Lindgren1-7/+28
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for dra7 shamTony Lindgren1-7/+27
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Similar to am3, I could not find any documentation for the sysc register on this one, but it seems to work just fine based on "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 shamTony Lindgren1-6/+26
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Similar to am3, I could not find any documentation for the sysc register on this one, but it seems to work just fine based on "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am3 shamTony Lindgren1-6/+26
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. I could not find any documentation for the sysc register on this one, but it seems to work just fine with "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 qspiTony Lindgren1-10/+28
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for omap3 sdmaTony Lindgren3-10/+44
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that we want to use separate compatible for omap34xx and omap36xx so let's do that here too while at it. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for omap2 sdmaTony Lindgren2-10/+36
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that we want to use separate compatible for omap2420 and omap2430 so let's do that here too while at it. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarityMarek Szyprowski1-1/+1
Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-17ARM: dts: aspeed: Add SD card for VesninIvan Mikhaylov1-0/+13
Presence signal is inverted for vesnin boards, 'cd-inverted' added for invertion signal enablement. Vesnin BMC uses microSD, there is no WP switch, 'disable-wp' is used for this purpose. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: yamp: Delete no-hw-checksumTao Ren1-1/+0
Ftgmac100's checksum issue has been fixed by commit 88824e3bf29a ("net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum") so this property is no longer required. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: netbmc: Delete no-hw-checksumTao Ren1-1/+0
The ftgmac100's checksum issue has been fixed by commit 88824e3bf29a ("net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum") so this property is no longer required Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: AST2400 disables hw checksumJoel Stanley3-5/+0
There is no need to specify this property in the device tree as the AST2400 does not have working hardware checksum and disables it in the driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: ibm-power9-dual: Add a unit address for OCC nodesAndrew Jeffery1-2/+2
These temporarily have a unit address until userspace is fixed up as noted in comments elsewhere in the dtsi. Fixes the following warning: arch/arm/boot/dts/ibm-power9-dual.dtsi:89.18-91.6: Warning (unit_address_vs_reg): /gpio-fsi/cfam@0,0/sbefifo@2400/occ: node has a reg or ranges property, but no unit name arch/arm/boot/dts/ibm-power9-dual.dtsi:190.18-192.6: Warning (unit_address_vs_reg): /gpio-fsi/cfam@0,0/hub@3400/cfam@1,0/sbefifo@2400/occ: node has a reg or ranges property, but no unit name Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g6: Cleanup watchdog unit addressAndrew Jeffery1-1/+1
arch/arm/boot/dts/aspeed-g6.dtsi:204.28-208.6: Warning (simple_bus_reg): /ahb/apb/watchdog@1e7850C0: simple-bus unit address format error, expected "1e7850c0" Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g5: Sort LPC child nodes by unit addressAndrew Jeffery1-5/+6
Lets try to maintain some sort of sanity. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: Add reg hints to syscon childrenAndrew Jeffery2-14/+19
Fixes the following warnings: arch/arm/boot/dts/aspeed-g5.dtsi:209.28-226.6: Warning (avoid_unnecessary_addr_size): /ahb/apb/syscon@1e6e2000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/boot/dts/aspeed-g4.dtsi:156.28-172.6: Warning (avoid_unnecessary_addr_size): /ahb/apb/syscon@1e6e2000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: Cleanup lpc-ctrl and snoop regsAndrew Jeffery2-6/+6
Fix the following warning: arch/arm/boot/dts/aspeed-g5.dtsi:409.27-414.8: Warning (unique_unit_address): /ahb/apb/lpc@1e789000/lpc-host@80/lpc-ctrl@0: duplicate unit-address (also used in node /ahb/apb/lpc@1e789000/lpc-host@80/lpc-snoop@0) Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: witherspoon: Cleanup gpio-keys-polled propertiesAndrew Jeffery1-2/+0
dtbs_check gave the following warning: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: swift: Cleanup gpio-keys-polled propertiesAndrew Jeffery1-2/+0
dtbs_check gave the following warning: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Cc: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: fp5280g2: Cleanup gpio-keys-polled propertiesAndrew Jeffery1-2/+0
dtbs_check gave the following warning: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Cc: John Wang <wangzqbj@inspur.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: vesnin: Add unit address for memory nodeAndrew Jeffery1-1/+1
Fixes the following warnings: arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dt.yaml: /: memory: False schema does not allow {'reg': [[1073741824, 536870912]]} arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dt.yaml: memory: 'device_type' is a required property Cc: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g5: Use recommended generic node name for SDMCAndrew Jeffery1-1/+1
The EDAC is a sub-function of the SDRAM Memory Controller. Rename the node to the appropriate generic node name. Cc: Stefan M Schaeckeler <sschaeck@cisco.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g5: Move EDAC node to APBAndrew Jeffery1-7/+7
Previously the register interface was not attached to any internal bus, which is not correct - it lives on the APB. Cc: Stefan M Schaeckeler <sschaeck@cisco.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-16ARM: dts: NSP: Use hardware I2C for BCM958625HRFlorian Fainelli1-10/+5
Now that the i2c-bcm-iproc driver has been fixed to permit reading more than 63 bytes in a single transaction with commit fd01eecdf959 ("i2c: iproc: Fix i2c master read more than 63 bytes") we no longer need to bitbang i2c over GPIOs which was necessary before to allow the PHYLINK/SFP subsystems to read SFP modules. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-16ARM: dts: Add generic compatible for omap sdma instancesTony Lindgren3-3/+3
We need this to pass auxdata to all the sdma instances. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-16ARM: dts: sun8i: r40: Add I2C pinmux optionsChen-Yu Tsai1-0/+28
The R40 has five I2C controllers. Currently only I2C0 has its pinmux option defined. Add the options for the remaining four, and set them as the default, since each controller has only one possible pinmux configuration. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6Masahiro Yamada1-0/+10
The next generation SoC can connect on-board slave devices via I2C ch5 and ch6. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-12-13Merge tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixesOlof Johansson3-3/+3
Fixes for omap variants for v5.5-rc1 cycle This series of changes contains fixes for issues recently noticed: - The ti-sysc interconnect target module driver needs fixes for mstandby quirk handling and reset delay - We need to configure am335x-sancloud-bbe to use rgmii-id mode because of the phy changes done earlier - NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV - We are still relying on DEBUG_FS at least for PM configuration, let's add it back - We need to update compatible for am437x-gp/epos-evm because of the recent changes to use generic panels * tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing reset delay handling ARM: dts: am437x-gp/epos-evm: fix panel compatible ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling Link: https://lore.kernel.org/r/pull-1576254925-709310@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-13ARM: dts: rockchip: Add missing cpu operating points for rk3288-tinkerJack Chen1-1/+12
The Tinker Board / S devices use a special chip variant called rk3288-c and use different operating points with a higher max frequency. So add the missing operating points for Tinker Board / S devices, also increase the vdd_cpu regulator-max-microvolt to 1400000 uV so that the cpu can operate at 1.8 GHz. Signed-off-by: Jack Chen <redchenjs@live.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20191202153540.26143-1-redchenjs@foxmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-12ARM: dts: msm8974: Move ADSP smd edge to ADSP PILBjorn Andersson1-7/+9
With the introduction of SSR support in the ADSP PIL we should describe the SMD edge inside the ADSP PIL node. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [luca@z3ntu.xyz: Add label for the smd edge] Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20191114175348.288976-2-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-12ARM: dts: msm8974: Add modem remoteproc nodeBjorn Andersson1-9/+54
Add the remoteproc node for the modem on msm8974. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [luca@z3ntu.xyz: cleanups, add label to smd-edge node] Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20191114175348.288976-1-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-12ARM: dts: exynos: Correct USB3503 GPIOs polarityMarek Szyprowski3-3/+3
Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-12Merge tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesOlof Johansson2-12/+21
i.MX fixes for 5.5: - Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board, so that SPI NOR device can be probed. - Fix power button of E60K02 board by removing LDORTC2 regulator. - A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs"). - A couple of fixes on LS1028A SoC TMU regarding to calibration data and reboot register configuration. - Fix a regression seen on imx6ul-evk board by marking always-on for the regulator that is shared by many peripherals. - Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig. * tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: e60k02: fix power button ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-12ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0Jyri Sarha1-0/+13
Add support for OSD9616P0899-10 96x16 passive matrix display. The pre-charge period parameters are taken form a OSD9616P0899-10 document, but the display works fine with the default values too. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12ARM: dts: am335x-evmsk: Use drm simple-panel instead of tilcdc-panelJyri Sarha1-26/+12
Move to use the new drm panel support in tilcdc together with added "newhaven,nhd-4.3-480272ef-atxl"-panel support in drm panel-simple. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.