aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-05-03ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dkFabien Dessenne1-0/+14
The blue led (Linux heartbeat) is connected to the PA14 pin of the stm32mp135f-dk board. Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-03ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131Fabien Dessenne1-0/+2
Add interrupt-parent property in pinctrl node to use GPIO as IRQ. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-03Merge tag 'amlogic-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dtArnd Bergmann1-1/+1
Amlogic ARM DT changes for v5.19: - align SPI NOR node name with dtschema * tag 'amlogic-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson: align SPI NOR node name with dtschema Link: https://lore.kernel.org/r/fbd7cbe7-1fe9-7009-37d6-c01b15c93032@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'ux500-dts-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dtArnd Bergmann9-18/+951
Ux500 DTS updates for the v5.19 kernel cycle: - New devicetree for Codina TMO (SGH-T599). - Add the Amastaos proximity sensor to the Codina. - Add line impedance per machine to the Fuel Gauge nodes. - Add GPS to Janice, Skomer and Codina. - Add NFC to the Codina for GT-I8160P. - Some janitorial like clock names. * tag 'ux500-dts-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Add GPS to the Codina ARM: dts: ux500: Add NFC to the Codina ARM: dts: ux500: Add GPS to Skomer device tree ARM: dts: ux500: Add GPS to Janice device tree ARM: dts: ux500: Add line impedance to fuel gauge ARM: dts: ux500: Register Amstaos proximity sensor ARM: dts: ux500: Add Codina TMO device tree dt-bindings: arm: ux500: Document Codina-TMO ARM: dts: ste-dbx: Update spi clock-names property Link: https://lore.kernel.org/r/CACRpkdYngWscqak5phKm58O2GF0RmVETgwW4NCKTBiASdaEcyg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'omap-for-v5.19/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dtArnd Bergmann14-555/+1582
Devicetree changes for omaps Devicetree changes for omaps: - A series of changes to fix devicetree binding check warnings for omaps the the use of clock-output-names and clksel bindings - Update Ethernet node names for omaps - Pinctrl updates for logicpd-som-lv - A series of updates for am335x-guardian - Regulator range update for am335x-baltos Note that this branch is based on a upstream IOMMU fix as it's needed for booting on some SoCs. * tag 'omap-for-v5.19/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits) ARM: dts: am335x-baltos: update MPU regulator range ARM: dts: am335x: Guardian: Update comments ARM: dts: am335x: Guardian: Add gpio line manes ARM: dts: am335x: Guardian: Update interface pinmux ARM: dts: am335x: Guardian: Disable DMA property of USB1 ARM: dts: am335x: Guardian: Enable UART port two ARM: dts: am335x: Guardian: Update backlight parameter ARM: dts: am335x: Guardian: Add lcd port ARM: dts: am335x: Guardian: Update regulator node name ARM: dts: am335x: Guardian: Update beeper label ARM: dts: am335x: Guardian: Update life led ARM: dts: am335x: Guardian: Remove mmc status led ARM: dts: am335x: Guardian: Disable poweroff support from RTC ARM: dts: am335x: Guardian: Add keypad ARM: dts: am335x: Guardian: Rename power button label ARM: dts: am335x: Guardian: Update NAND partition table ARM: dts: logicpd-som-lv: Move pinmuxing to peripheral nodes ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards ARM: dts: Drop custom clkctrl compatible and update omap5 l4per ARM: dts: Add clock-output-names for omap5 ... Link: https://lore.kernel.org/r/pull-1650961799-428630@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03Merge tag 'renesas-arm-dt-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dtArnd Bergmann10-2/+10
Renesas ARM DT updates for v5.19 - ADC, SDHI, CAN-FD, I2C, QSPI, timer, watchdog, sound, USB, SPI, GPU, cpufreq, and thermal support for the RZ/V2L SoC, and the RZ/V2L SMARC EVK development board, - USB, I2C, Audio, NOR Flash, timer, SPI support for RZ/G2LC SMARC EVK development board, - Can-FD support for the R-Car M30W+ and V3U SoCs, and the Falcon development board, - I2C and GPIO support for the R-Car S4-8 SoC, - I2C EEPROM support for the Falcon development board, - SPI Multi I/O Bus Controller (RPC-IF) support for the R-Car H3, M3-W(+), M3-N, E3, and D3 SoCs, - RPC HyperFlash support for the Draak, Ebisu, Salvator-X(S), and ULCB development boards, - Initial support (UART, DMAC, pin control, SDHI, eMMC, Ethernet) for the RZ/G2UL SoC, and the RZ/G2UL SMARC EVK development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (55 commits) ARM: dts: r9a06g032: Drop "arm,cortex-a7-timer" from timer node arm64: dts: renesas: r8a779f0: Add GPIO nodes arm64: dts: renesas: rzg2ul-smarc-som: Enable Ethernet on SMARC platform arm64: dts: renesas: rzg2ul-smarc-som: Enable eMMC on SMARC platform arm64: dts: renesas: rzg2ul-smarc: Enable microSD on SMARC platform arm64: dts: renesas: r9a07g043: Add GbEthernet nodes arm64: dts: renesas: r9a07g043: Add SDHI nodes arm64: dts: renesas: rzg2ul-smarc: Add scif0 and audio clk pins arm64: dts: renesas: r9a07g043: Fillup the pinctrl stub node arm64: dts: renesas: Add initial device tree for RZ/G2UL Type-1 SMARC EVK arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC arm64: dts: renesas: rzg2l-smarc: Move gpios property of vccq_sdhi1 from common dtsi arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1 on carrier board arm64: dts: renesas: ulcb: Add RPC HyperFlash device node arm64: dts: renesas: salvator-common: Add RPC HyperFlash device node arm64: dts: renesas: ebisu: Add RPC HyperFlash device node arm64: dts: renesas: draak: Add RPC HyperFlash device node arm64: dts: renesas: rcar-gen3: Add RPC device nodes arm64: dts: renesas: rcar-gen4: Add interrupt properties to watchdog nodes arm64: dts: renesas: rzg2: Add interrupt properties to watchdog nodes ... Link: https://lore.kernel.org/r/cover.1650638505.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-03ARM: dts: dm81xx: use new 'dma-channels/requests' propertiesKrzysztof Kozlowski2-0/+6
The '#dma-channels' and '#dma-requests' properties were deprecated in favor of these defined by generic dma-common DT bindings. Add new properties while keeping old ones for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20220503065201.51818-7-krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am33xx: use new 'dma-channels/requests' propertiesKrzysztof Kozlowski1-0/+3
The '#dma-channels' and '#dma-requests' properties were deprecated in favor of these defined by generic dma-common DT bindings. Add new properties while keeping old ones for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20220503065201.51818-5-krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL1_EMU clocksTony Lindgren1-72/+80
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_PER clocksTony Lindgren1-60/+68
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN_PER clocksTony Lindgren1-131/+139
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_PER clocksTony Lindgren2-145/+160
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_CAM clocksTony Lindgren1-15/+23
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_DSS clocksTony Lindgren1-17/+25
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_DSS clocksTony Lindgren3-34/+56
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKOUT_CTRL clocksTony Lindgren1-22/+30
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL1_PLL clocksTony Lindgren1-32/+40
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_WKUP clocksTony Lindgren2-22/+37
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN_WKUP clocksTony Lindgren2-47/+62
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_WKUP clocksTony Lindgren3-41/+63
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_CORE clocksTony Lindgren3-56/+78
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN3_CORE clocksTony Lindgren2-12/+29
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN1_CORE clocksTony Lindgren6-249/+292
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 crypto accelerator clocksTony Lindgren1-35/+42
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN1_CORE clocksTony Lindgren6-178/+221
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CONTROL_DEVCONF1 clocksTony Lindgren1-20/+28
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CONTROL_DEVCONF0 clocksTony Lindgren1-14/+22
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am43xx: Add i2c voltage scaling firmware to wkup_m3_ipcDave Gerlach3-0/+9
Add appropriate firmware-name property for all am43xx platforms. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> [dfustini: change property from 'ti,scale-data-fw' to 'firmware-name'] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-4-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipcDave Gerlach3-0/+12
Add appropriate firmware-name property for all am33xx platforms. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [dfustini: change property from 'ti,scale-data-fw' to 'firmware-name'] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-3-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am437x-gp-evm: Enable wkup_m3 control of IO isolationDave Gerlach1-0/+4
With this flag wkup_m3 is able to control IO isolation during suspend on the board. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-2-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-02ARM: dts: stm32: add support for Protonic PRTT1x boardsOleksij Rempel5-0/+651
This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication. - PRTT1C - 10BaseT1L switch - PRTT1S - 10BaseT1L CO2 sensor board - PRTT1A - 10BaseT1L multi functional controller Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-02ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux groupOleksij Rempel1-0/+15
Add spi1-1 pingroup as preparation for Protonic PRTT1C board. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-04-29Revert "arm: dts: at91: Fix boolean properties with values"Arnd Bergmann2-2/+2
This reverts commit 0dc23d1a8e17, which caused another regression as the pinctrl code actually expects an integer value of 0 or 1 rather than a simple boolean property. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29Merge tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann1-1/+1
i.MX fixes for 5.18, 2nd round: - Fix one sparse warning on imx-weim driver. - Fix vqmmc regulator to get UHS-I mode work on imx6ull-colibri board. - Add missing 32.768 kHz PMIC clock for imx8mn-ddr4-evk board to fix bd718xx-clk probe error. * tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator bus: imx-weim: make symbol 'weim_of_notifier' static Link: https://lore.kernel.org/r/20220426013427.GB14615@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: dts: am335x-myirtech: Update NAND default partition table layoutAlexander Shiyan2-10/+13
This patch replaces the legacy partition table layout with a modern style. As an additional change, we are reserving space for three backup MLO entries and increasing space for the main bootloader. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Message-Id: <20220427081914.6773-2-eagle.alexander923@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-29ARM: dts: am335x-myirtech: Add an external clock oscillator for CPU RTCAlexander Shiyan1-0/+9
The CPU RTC has an external crystal, so to keep time, let's define it for devicetree. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Message-Id: <20220427081914.6773-1-eagle.alexander923@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-28ARM: dts: qcom: msm8974: Add missing license headersLuca Weiss3-0/+3
All other msm8974 dts files are licensed as GPL-2.0 so add the same header to the files where it's missing. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421211936.345168-3-luca@z3ntu.xyz
2022-04-28ARM: dts: qcom: msm8974-FP2: Add mmc* aliasesLuca Weiss1-0/+2
Add aliases for internal storage and SD card so they don't randomly switch around. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421211936.345168-2-luca@z3ntu.xyz
2022-04-28ARM: dts: qcom: msm8974-FP2: We're msm8974proLuca Weiss2-2/+2
Fairphone 2 always uses Snapdragon 801, a.k.a msm8974pro so change the include and filename to that. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421211936.345168-1-luca@z3ntu.xyz
2022-04-28ARM: dts: r9a06g032: Add missing '#power-domain-cells'Herve Codina1-0/+1
Without '#power-domain-cells' property, power-domains cannot be used. This property is noted required in the device-tree binding. Add '#power-domain-cells' as needed. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20220422120850.769480-6-herve.codina@bootlin.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28ARM: dts: aspeed: add reset properties into MDIO nodesDylan Hung1-0/+4
Add reset control properties into MDIO nodes. The 4 MDIO controllers in AST2600 SOC share one reset control bit SCU50[3]. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-26ARM: dts: ux500: Add GPS to the CodinaLinus Walleij1-4/+28
The Codina has a Broadcom BCM4751 GPS chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-jsk: Use usb-nop-xceiv usbphy for USB1Alexander Shiyan1-0/+8
Add node describing the USB1 usbphy. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-som: Setup usbotg vbus-supplyAlexander Shiyan1-0/+1
The VBUS on usbotg is connected to the PMIC SWBST, let's reflect that in the bindings. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-som: Update PMIC voltagesAlexander Shiyan1-5/+5
This patch updates the PMIC voltages according to the module's datasheet to match both commercial and industrial variants of the module. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: i.MX51: digi-connectcore-som: Remove unused regulatorsAlexander Shiyan1-14/+0
VGEN1, VGEN2 and GPO1 regulators are not used on SOM. Let's remove these entries. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: imx51: Add generic DMA bindings for UART nodesAlexander Shiyan1-0/+6
Updates UART nodes to adopt generic DMA bindings. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-26ARM: dts: Add initial LS1021A IoT board dts supportChangming Huang2-0/+228
The LS1021A-IoT gateway reference design is a purpose-built, small footprint hardware platform equipped with a wide array of both high-speed connectivity and low speed serial interfaces. CC: Li Yang <leoyang.li@nxp.com> Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: add thermal zone and attach tmp103 to it.Oleksij Rempel1-1/+10
Latest version of ti,tmp103 driver supports thermal zone. So make use of it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Add missing ISB led nodeDavid Jander1-0/+9
Add missing ISB led node. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.