aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/configs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-06-03Merge tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixesOlof Johansson2-0/+2
Two fixes for v4.7 cycle for build issues: 1. Fix samsung-keypad build error if INPUT is selected as module. The error though depends on some uncommon build settings so it is not as easy to trigger. 2. Get rid of 'samsung_device_dma_mask' defined but not used warning. * tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos: don't select keyboard driver ARM: samsung: improve static dma_mask definition Signed-off-by: Olof Johansson <olof@lixom.net>
2016-05-23arch/defconfig: remove CONFIG_RESOURCE_COUNTERSKonstantin Khlebnikov2-2/+0
This option was replaced by PAGE_COUNTER which is selected by MEMCG. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-18Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds18-77/+432
Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs. We are adding three new defconfig files for the newly added 32-bit machines (aspeed and mps2), the rest is mainly housekeeping. The changes outside of arch/arm/config/ are for a Kconfig symbol that got renamed" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits) ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME ARM: u8500_defconfig: update sensor config ARM: u8500_defconfig: remove staging from defconfig ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT ARM: at91/defconfig: sama5: add CONFIG_FHANDLE arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400 ARM: at91: sama5: Update defconfig ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO ARM: multi_v7: Enable Tegra XUSB controller in defconfig ARM: tegra: Enable XUSB controller in defconfig ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver ARM: multi_v7_defconfig: add Atmel watchdog timers ARM: multi_v7_defconfig: add HLCDC drivers as modules ARM: at91/defconfig: add PDMIC driver to sama5_defconfig ARM: at91/defconfig: add HLCDC driver to sama5_defconfig ...
2016-05-18ARM: exynos: don't select keyboard driverArnd Bergmann2-0/+2
The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?), but this fails if CONFIG_INPUT is a loadable module: drivers/input/built-in.o: In function `samsung_keypad_remove': drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device' drivers/input/built-in.o: In function `samsung_keypad_irq': drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event' drivers/input/built-in.o: In function `samsung_keypad_irq': include/linux/input.h:389: undefined reference to `input_event' drivers/input/built-in.o: In function `samsung_keypad_probe': drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability' This removes the 'select' as suggested by Krzysztof Kozlowski and instead enables the driver from the defconfig files. The problem does not happen on mainline kernels, as we don't normally build built-in input drivers when CONFIG_INPUT=m, but I am experimenting with a patch to change this, and the samsung keypad driver showed up as one example that was silently broken before. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.org/lkml/2016/2/14/55 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-11ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIMEArnd Bergmann2-2/+2
Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files, while we add two new defconfig files with d0bc3483da87 ("arm/configs: Add Aspeed defconfig"), with the old type. This changes the two new defconfig files to match the other ones. As a result, we get harmless warnings for the arm-soc defconfig branch by itself, but everything will work when 4.7-rc1 is out. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-10Merge tag 'at91-defconfig2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfigArnd Bergmann2-2/+19
Merge "Second batch of defconfig" from Nicolas Ferre: - sama5_defconfig: update to support easy use of systemd userspace * tag 'at91-defconfig2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/defconfig: sama5: add CONFIG_FHANDLE ARM: at91: sama5: Update defconfig ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver ARM: multi_v7_defconfig: add Atmel watchdog timers ARM: multi_v7_defconfig: add HLCDC drivers as modules ARM: at91/defconfig: add PDMIC driver to sama5_defconfig ARM: at91/defconfig: add HLCDC driver to sama5_defconfig ARM: at91/defconfig: add the HDMA controller to sama5_defconfig
2016-05-10Merge tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux into next/defconfigArnd Bergmann3-2/+180
Merge "aspeed defconfig for 4.7" from Joel Stanley: This adds configurations used for testing Aspeed BMC SoCs, as well as adding the v5 part to the multi defconfig. * tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux: arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400
2016-05-10Merge tag 'ux500-defconfig-armsoc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/defconfigArnd Bergmann2-4/+2
Merge "Ux500 defconfig update for v4.7" from Linus Walleij: - Remove the unused MACH_UX500_DT option from the multi_v7 defconfig - Remove staging driver from u8500_defconfig - Update sensor support in u8500_defconfig * tag 'ux500-defconfig-armsoc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: u8500_defconfig: update sensor config ARM: u8500_defconfig: remove staging from defconfig ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
2016-05-10ARM: u8500_defconfig: update sensor configLinus Walleij1-1/+2
The Ux500 is using buffered IIO as the sensors support IRQs. The BH1780 ambient light sensor was added to IIO, so disable the old misc driver and activate the driver in IIO. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-10ARM: u8500_defconfig: remove staging from defconfigLinus Walleij1-2/+0
Ux500 was enabling the staging drivers due to the RMI4 touchscreen driver, this is now properly upstream, so drop this and the dead symbol for the old RMI4 hack from the defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-10ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DTLee Jones1-1/+0
Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-10Merge tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfigArnd Bergmann2-3/+24
Merge "i.MX defconfig updates for 4.7" from Shawn Guo: - Update multi_v5_defconfig for i.MX21/27 and systemd support - Update imx_v6_v7_defconfig to support devices found on various i.MX6 board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC * tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO ARM: multi_v5_defconfig: Enable recommended options for systemd ARM: multi_v5_defconfig: Enable support for MX21/MX27 ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
2016-05-10Merge tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfigArnd Bergmann2-0/+4
Merge "ARM: tegra: Default configuration updates for v4.7-rc1" from Thierry Reding: Enable the XUSB pad controller and XUSB controller drivers on the Tegra and multi-v7 default configurations. * tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: multi_v7: Enable Tegra XUSB controller in defconfig ARM: tegra: Enable XUSB controller in defconfig
2016-05-10Merge tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfigArnd Bergmann1-1/+6
Merge "DaVinci defconfig updates for v4.7" from Sekhar Nori: Some defconfig updates to support systemd based filesystems, SPI NOR and GPIO sysfs entries. * tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: enable SPI and NOR as modules ARM: davinci_all_defconfig: support systemd ARM: davinci_all_defconfig: enable GPIO_SYSFS
2016-05-10ARM: at91/defconfig: sama5: add CONFIG_FHANDLENicolas Ferre1-0/+1
CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So explicitly enable it to allow easy use of systemd userspace. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-09net: dsa: mv88e6xxx: factorize the switch driverVivien Didelot3-7/+3
Now that all drivers support the same set of functions and the same setup code, drop every model-specific DSA switch driver and replace them with a common mv88e6xxx driver. This merges the info tables into one, removes the function exports, the model-specific files, and update the defconfigs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09arm/configs: Add Aspeed defconfigJoel Stanley2-0/+174
Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09arm/configs/multi_v5: Add Aspeed ast2400Joel Stanley1-2/+6
This adds the Aspeed ast2400 BMC SoC to the build. The SoC has six UARTs so we need to enable the appropriate options for SERIAL_8250 Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-06ARM: at91: sama5: Update defconfigMarek Vasut1-0/+1
Enable CGROUPS support, so we can boot userspace that uses systemd on top of kernel configured using this defconfig. The systemd userspace depends on cgroups and without them, it dies in mysterious ways. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-03ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHYMarcel Ziswiler1-0/+1
The driver for Micrel PHYs is required for the Apalis iMX6 module plugged into a Ixora carrier board featuring an on-module Micrel KSZ9031 Gigabit PHY. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIOMarcel Ziswiler1-0/+1
The GPIO-based bitbanging I2C driver is required to make HDMI work on the Apalis iMX6 module plugged into a Ixora carrier board featuring a DDC channel to read a screen's EDID being hooked up to regular GPIOs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-29ARM: multi_v7: Enable Tegra XUSB controller in defconfigThierry Reding1-0/+2
Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the multi_v7 default configuration. The XUSB pad controller is built-in because it is needed by PCIe, which in turn provides the onboard ethernet used for network boot on a Jetson TK1. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29ARM: tegra: Enable XUSB controller in defconfigThierry Reding1-0/+2
Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the Tegra default configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29Merge tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfigArnd Bergmann1-36/+30
Merge "Defconfig changes for omap2plus_defconfig for v4.7 merge window" from Tony Lindgren: Mostly enable drivers used on various boards as loadable modules where possible. Also one warning fix related to RXKAD changes heading to v4.7. And run make save_defconfig to shrink down the size a bit. * tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value ARM: omap2plus_defconfig: Update with make savedefconfig ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support ARM: omap2plus_defconfig: Enable DP83867 support ARM: omap2plus_defconfig: Enable GPIO_TPIC2810
2016-04-28Merge tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into next/defconfigArnd Bergmann1-18/+11
Merge "NXP LPC32xx defconfig updates for v4.7" from Vladimir Zapolskiy: This includes savedefconfig update of lpc32xx_defconfig, which removes a number of outdated config options, plus ARM PrimeCell PL17x memory controller driver is enabled by default now, on LPC32xx boards the controller is commonly used to access SDRAM and NOR. * tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx: ARM: LPC32xx: add PL175 memory controller driver to defconfig ARM: LPC32xx: defconfig update
2016-04-27ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modulesTony Lindgren1-0/+5
These are available on n900. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-27ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driverNicolas Ferre1-0/+1
Add the new sama5d2-compatible ADC driver as a module. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMICNicolas Ferre1-0/+1
Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver as a module. It's used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driverNicolas Ferre1-0/+1
Add the Atmel Image Sensor Interface (ISI) VIDEO driver as a module. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: multi_v7_defconfig: add Atmel watchdog timersNicolas Ferre1-0/+2
Add both Atmel watchdog timers to the multi_v7_defconfig. They are added as part of the kernel because it's a core piece of the system. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: multi_v7_defconfig: add HLCDC drivers as modulesBoris Brezillon1-0/+3
Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: at91/defconfig: add PDMIC driver to sama5_defconfigNicolas Ferre1-0/+1
Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation for sama5 default configuration. Is used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27ARM: at91/defconfig: add HLCDC driver to sama5_defconfigNicolas Ferre1-2/+7
Add the LCD DRM driver with all its dependencies: - the MFD driver - the backlight PWM - the simple panel driver Remove the CONFIG_FB as it is not needed on any sama5 device. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27ARM: at91/defconfig: add the HDMA controller to sama5_defconfigNicolas Ferre1-0/+1
Selection of the HDMAC option is now needed to allow some sama5 devices to have the DMA driver compiled and available. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable moduleTony Lindgren1-0/+1
This is in use on omap4 boards. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol valueJavier Martinez Canillas1-1/+1
Commit 648af7fca159 ("rxrpc: Absorb the rxkad security module") changed the RXKAD Kconfig symbol from tristate to boolean but the commit didn't update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module. This leads to the following warning when using the omap2plus_defconfig: arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26Merge tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfigArnd Bergmann2-2/+2
Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman: * Remove Gen2 designation from Kconfig for R-Car PCIE driver * tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: PCI: rcar-pcie: Remove Gen2 designation from Kconfig
2016-04-26ARM: configs: add MPS2 defconfigVladimir Murzin1-0/+109
This patch adds a new config for MPS2 platform. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-04-25Merge tag 'keystone_config_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfigArnd Bergmann1-0/+2
Merge "ARM: Keystone HOTPLUG and PSCI config update for 4.7" from Santosh Shilimkar * tag 'keystone_config_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: configs: keystone: Add CPU Hotplug related options
2016-04-25Merge tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux into next/defconfigArnd Bergmann2-6/+10
Merge "This pull request contains defconfig changes for Broadcom ARM-based SoCs" from Florian Fainelli: - Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S, switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller - Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root Power Management support, switching sdhci-bcm2835 for sdhci-iproc * tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux: ARM: bcm2835: Enable NFS root support. ARM: bcm2835: Enable the VC4 graphics driver in the defconfig ARM: bcm2835: Enable CONFIG_PM. ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC ARM: multi_v7_defconfig: Build in DWC2 USB support ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC ARM: multi_v7_defconfig: Add more BCM2835 support
2016-04-25Merge tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu into next/defconfigArnd Bergmann3-1/+3
Merge "mvebu defconfig for 4.7 (part 1)" from Gregory CLEMENT - Use the new cryto engine(mv_cesa) in the mvebu and multi-arm defcongig files - Attach mvebu_*_defconfig to the mvebu maintainers * tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driver ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver MAINTAINERS: attach arch/arm/configs/mvebu_*_defconfig to relevant maintainers ARM: mvebu_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
2016-04-25ARM: multi_v7_defconfig: enable Denali NAND controllerMasahiro Yamada1-0/+1
This NAND controller device is used on UniPhier SoCs (and I know it is also used on SoC FPGA). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25Merge tag 'samsung-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfigArnd Bergmann2-0/+15
Merge "Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.7" from Krzysztof Kozłowski: 1. Enable additional drivers for Trats2 board (Exynos4412). 2. Enable CPUFreq governors as modules. * tag 'samsung-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_defconfig: Enable CPUFreq governors as modules ARM: exynos_defconfig: Enable CPUFreq governors as modules ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors
2016-04-25ARM: davinci_all_defconfig: enable SPI and NOR as modulesKevin Hilman1-0/+4
Enable SPI driver and SPI NOR flash support as modules. Tested with SPI NOR flash on DA850-EVM. Basic boot test only to confirm NOR flash device detection. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-25ARM: davinci_all_defconfig: support systemdSekhar Nori1-1/+1
CONFIG_FHANDLE is required by systemd[1], which is the default init system in more and more distributions. So lets enable it for DaVinci platforms as well. While at it, remove stale entry CONFIG_INOTIFY=y [1] https://github.com/systemd/systemd/blob/master/README#L37 Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-22PCI: rcar-pcie: Remove Gen2 designation from KconfigSimon Horman2-2/+2
It appears that Gen2 is a misnomer for the R-Car PCIE driver which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2 from the help text and Kconfig symbol. Also, re-arange the Kconfig symbol name to use PCIE as the prefix. This appears to be in keeping with other PCIE Kconfig symbols. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-21ARM: LPC32xx: add PL175 memory controller driver to defconfigVladimir Zapolskiy1-0/+2
The change enables build of ARM PrimeCell PL17x driver for LPC32xx platform, the memory controller is commonly used to interface NOR flash drives. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-21ARM: LPC32xx: defconfig updateVladimir Zapolskiy1-18/+9
The change is a result of "make lpc32xx_defconfig; make savedefconfig" run, a number of config options are removed: CONFIG_BINFMT_AOUT=y -- not needed, legacy CONFIG_FPE_NWFPE=y -- not needed, AEABI build CONFIG_IPV6_PRIVACY=y -- removed build option CONFIG_IPV6=y -- selected by default CONFIG_MII=y -- not needed, board phys don't select library CONFIG_MTD_CHAR=y -- removed build option CONFIG_MTD_M25P80=y -- not needed, AT25 EEPROM driver is in use CONFIG_USB_PHY=y -- selected by default Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-14ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driverRomain Perier1-1/+1
This enables the new driver for Marvell CESA crypto engines on all mvebu v5. The old driver is no longer used, but it is still in the tree for fallback. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-14ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driverRomain Perier1-0/+1
This enables the new driver for Marvell CESA crypto engines on all ARMv7. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.