aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/crypto/chacha-glue.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-25vfs: mark pipes and sockets as stream-like file descriptorsLinus Torvalds2-2/+5
In commit 3975b097e577 ("convert stream-like files -> stream_open, even if they use noop_llseek") Kirill used a coccinelle script to change "nonseekable_open()" to "stream_open()", which changed the trivial cases of stream-like file descriptors to the new model with FMODE_STREAM. However, the two big cases - sockets and pipes - don't actually have that trivial pattern at all, and were thus never converted to FMODE_STREAM even though it makes lots of sense to do so. That's particularly true when looking forward to the next change: getting rid of FMODE_ATOMIC_POS entirely, and just using FMODE_STREAM to decide whether f_pos updates are needed or not. And if they are, we'll always do them atomically. This came up because KCSAN (correctly) noted that the non-locked f_pos updates are data races: they are clearly benign for the case where we don't care, but it would be good to just not have that issue exist at all. Note that the reason we used FMODE_ATOMIC_POS originally is that only doing it for the minimal required case is "safer" in that it's possible that the f_pos locking can cause unnecessary serialization across the whole write() call. And in the worst case, that kind of serialization can cause deadlock issues: think writers that need readers to empty the state using the same file descriptor. [ Note that the locking is per-file descriptor - because it protects "f_pos", which is obviously per-file descriptor - so it only affects cases where you literally use the same file descriptor to both read and write. So a regular pipe that has separate reading and writing file descriptors doesn't really have this situation even though it's the obvious case of "reader empties what a bit writer concurrently fills" But we want to make pipes as being stream-line anyway, because we don't want the unnecessary overhead of locking, and because a named pipe can be (ab-)used by reading and writing to the same file descriptor. ] There are likely a lot of other cases that might want FMODE_STREAM, and looking for ".llseek = no_llseek" users and other cases that don't have an lseek file operation at all and making them use "stream_open()" might be a good idea. But pipes and sockets are likely to be the two main cases. Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Eic Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Marco Elver <elver@google.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Paul McKenney <paulmck@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-25writeback: fix -Wformat compilation warningsQian Cai1-24/+24
The commit f05499a06fb4 ("writeback: use ino_t for inodes in tracepoints") introduced a lot of GCC compilation warnings on s390, In file included from ./include/trace/define_trace.h:102, from ./include/trace/events/writeback.h:904, from fs/fs-writeback.c:82: ./include/trace/events/writeback.h: In function 'trace_raw_output_writeback_page_template': ./include/trace/events/writeback.h:76:12: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'ino_t' {aka 'unsigned int'} [-Wformat=] TP_printk("bdi %s: ino=%lu index=%lu", ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/trace/trace_events.h:360:22: note: in definition of macro 'DECLARE_EVENT_CLASS' trace_seq_printf(s, print); \ ^~~~~ ./include/trace/events/writeback.h:76:2: note: in expansion of macro 'TP_printk' TP_printk("bdi %s: ino=%lu index=%lu", ^~~~~~~~~ Fix them by adding necessary casts where ino_t could be either "unsigned int" or "unsigned long". Fixes: f05499a06fb4 ("writeback: use ino_t for inodes in tracepoints") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-11-24Linux 5.4Linus Torvalds1-1/+1
2019-11-24xen: Fix Kconfig indentationKrzysztof Kozlowski1-29/+29
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-23cramfs: fix usage on non-MTD deviceMaxime Bizon1-2/+2
When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if we fail to mount on MTD, we don't try on block device. Note: this relies upon cramfs_mtd_fill_super() leaving no side effects on fc state in case of failure; in general, failing get_tree_...() does *not* mean "fine to try again"; e.g. parsed options might've been consumed by fill_super callback and freed on failure. Fixes: 74f78fc5ef43 ("vfs: Convert cramfs to use the new mount API") Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-11-23MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 moduleThomas Bogendoerfer1-0/+22
PROM only enables ethernet PHY on first Origin 200 module, so we must do it ourselves for the second module. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: David S. Miller <davem@davemloft.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org
2019-11-23MIPS: PCI: Fix fake subdevice ID for IOC3Thomas Bogendoerfer1-1/+1
Generation of fake subdevice ID had vendor and device ID swapped. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: David S. Miller <davem@davemloft.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org
2019-11-23kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraintsJim Mattson1-1/+3
Commit 37e4c997dadf ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL") broke the KVM_SET_MSRS ABI by instituting new constraints on the data values that kvm would accept for the guest MSR, IA32_FEATURE_CONTROL. Perhaps these constraints should have been opt-in via a new KVM capability, but they were applied indiscriminately, breaking at least one existing hypervisor. Relax the constraints to allow either or both of FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX and FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX to be set when nVMX is enabled. This change is sufficient to fix the aforementioned breakage. Fixes: 37e4c997dadf ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: x86: Grab KVM's srcu lock when setting nested stateSean Christopherson1-0/+3
Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug where nVMX derefences ->memslots without holding ->srcu or ->slots_lock. The other half of nested migration, ->get_nested_state(), does not need to acquire ->srcu as it is a purely a dump of internal KVM (and CPU) state to userspace. Detected as an RCU lockdep splat that is 100% reproducible by running KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the failing function, kvm_is_visible_gfn(), is only checking the validity of a gfn, it's not actually accessing guest memory (which is more or less unsupported during vmx_set_nested_state() due to incorrect MMU state), i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any case, setting nested state isn't a fast path so there's no reason to go out of our way to avoid taking ->srcu. ============================= WARNING: suspicious RCU usage 5.4.0-rc7+ #94 Not tainted ----------------------------- include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/10939: #0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm] stack backtrace: CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x68/0x9b kvm_is_visible_gfn+0x179/0x180 [kvm] mmu_check_root+0x11/0x30 [kvm] fast_cr3_switch+0x40/0x120 [kvm] kvm_mmu_new_cr3+0x34/0x60 [kvm] nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel] nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel] vmx_set_nested_state+0x256/0x340 [kvm_intel] kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm] kvm_vcpu_ioctl+0xde/0x630 [kvm] do_vfs_ioctl+0xa2/0x6c0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0x200 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f59a2b95f47 Fixes: 8fcc4b5923af5 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: x86: Open code shared_msr_update() in its only callerSean Christopherson1-20/+9
Fold shared_msr_update() into its sole user to eliminate its pointless bounds check, its godawful printk, its misleading comment (it's called under a global lock), and its woefully inaccurate name. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: Fix jump label out_free_* in kvm_init()Miaohe Lin1-4/+3
The jump label out_free_1 and out_free_2 deal with the same stuff, so git rid of one and rename the label out_free_0a to retain the label name order. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: x86: Remove a spurious export of a static functionSean Christopherson1-1/+0
A recent change inadvertently exported a static function, which results in modpost throwing a warning. Fix it. Fixes: cbbaa2727aa3 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-22Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"Lyude Paul1-1/+0
This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d. Ugh, I really dropped the ball on this one :\. So as it turns out RMI4 works perfectly fine on the X1 Extreme Gen 2 except for one thing I didn't notice because I usually use the trackpoint: clicking with the touchpad. Somehow this is broken, in fact we don't even seem to indicate BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even see any RMI4 events coming from the touchpad when I press down on it. This only seems to work for PS/2 mode. Since that means we have a regression, and PS/2 mode seems to work fine for the time being - revert this for now. We'll have to do a more thorough investigation on this. Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-22afs: Fix large file supportMarc Dionne1-0/+1
By default s_maxbytes is set to MAX_NON_LFS, which limits the usable file size to 2GB, enforced by the vfs. Commit b9b1f8d5930a ("AFS: write support fixes") added support for the 64-bit fetch and store server operations, but did not change this value. As a result, attempts to write past the 2G mark result in EFBIG errors: $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048 dd: error writing 'foo': File too large Set s_maxbytes to MAX_LFS_FILESIZE. Fixes: b9b1f8d5930a ("AFS: write support fixes") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22afs: Fix possible assert with callbacks from yfs serversMarc Dionne1-1/+0
Servers sending callback breaks to the YFS_CM_SERVICE service may send up to YFSCBMAX (1024) fids in a single RPC. Anything over AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger. Remove the assert, as the count has already been checked against the appropriate max values in afs_deliver_cb_callback and afs_deliver_yfs_cb_callback. Fixes: 35dbfba3111a ("afs: Implement the YFS cache manager service") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22MIPS: Ingenic: Disable abandoned HPTLB function.Zhou Yanjie2-2/+25
JZ4760/JZ4770/JZ4775/X1000/X1500 has an abandoned huge page tlb, this mode is not compatible with the MIPS standard, it will cause tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S) when starting the init process. write 0xa9000000 to cp0 register 5 sel 4 to disable this function to prevent getting stuck. Confirmed by Ingenic, this operation will not adversely affect processors without HPTLB function. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: jiaxun.yang@flygoat.com Cc: gregkh@linuxfoundation.org Cc: malat@debian.org Cc: tglx@linutronix.de Cc: chenhc@lemote.com
2019-11-22MIPS: PCI: remember nasid changed by set interrupt affinityThomas Bogendoerfer1-3/+2
When changing interrupt affinity remember the possible changed nasid, otherwise an interrupt deactivate/activate sequence will incorrectly setup interrupt. Fixes: e6308b6d35ea ("MIPS: SGI-IP27: abstract chipset irq from bridge") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-11-22MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameterThomas Bogendoerfer1-0/+4
If number of CPUs are limited by the kernel commandline parameter nr_cpus assignment of interrupts accourding to numa rules might not be possibe. As a fallback use one of the online CPUs as interrupt destination. Fixes: 69a07a41d908 ("MIPS: SGI-IP27: rework HUB interrupts") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-11-22mips: add support for folded p4d page tablesMike Rapoport14-39/+75
Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate, replace 5leve-fixup.h with pgtable-nop4d.h and drop usage of __ARCH_USE_5LEVEL_HACK. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Mike Rapoport <rppt@kernel.org>
2019-11-22mips: drop __pXd_offset() macros that duplicate pXd_index() onesMike Rapoport6-25/+18
The __pXd_offset() macros are identical to the pXd_index() macros and there is no point to keep both of them. All architectures define and use pXd_index() so let's keep only those to make mips consistent with the rest of the kernel. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Mike Rapoport <rppt@kernel.org>
2019-11-22mips: fix build when "48 bits virtual memory" is enabledMike Rapoport1-2/+7
With CONFIG_MIPS_VA_BITS_48=y the build fails miserably: CC arch/mips/kernel/asm-offsets.s In file included from arch/mips/include/asm/pgtable.h:644, from include/linux/mm.h:99, from arch/mips/kernel/asm-offsets.c:15: include/asm-generic/pgtable.h:16:2: error: #error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED #error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED ^~~~~ include/asm-generic/pgtable.h:390:28: error: unknown type name 'p4d_t'; did you mean 'pmd_t'? static inline int p4d_same(p4d_t p4d_a, p4d_t p4d_b) ^~~~~ pmd_t [ ... more such errors ... ] scripts/Makefile.build:99: recipe for target 'arch/mips/kernel/asm-offsets.s' failed make[2]: *** [arch/mips/kernel/asm-offsets.s] Error 1 This happens because when CONFIG_MIPS_VA_BITS_48 enables 4th level of the page tables, but neither pgtable-nop4d.h nor 5level-fixup.h are included to cope with the 5th level. Replace #ifdef conditions around includes of the pgtable-nop{m,u}d.h with explicit CONFIG_PGTABLE_LEVELS and add include of 5level-fixup.h for the case when CONFIG_PGTABLE_LEVELS==4 Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Mike Rapoport <rppt@kernel.org>
2019-11-22r8152: avoid to call napi_disable twiceHayes Wang1-8/+20
Call napi_disable() twice would cause dead lock. There are three situations may result in the issue. 1. rtl8152_pre_reset() and set_carrier() are run at the same time. 2. Call rtl8152_set_tunable() after rtl8152_close(). 3. Call rtl8152_set_ringparam() after rtl8152_close(). For #1, use the same solution as commit 84811412464d ("r8152: Re-order napi_disable in rtl8152_close"). For #2 and #3, add checking the flag of IFF_UP and using napi_disable/napi_enable during mutex. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22MAINTAINERS: Add myself as maintainer of virtio-vsockStefano Garzarella1-0/+1
Since I'm actively working on vsock and virtio/vhost transports, Stefan suggested to help him to maintain it. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22udp: drop skb extensions before marking skb statelessFlorian Westphal2-5/+28
Once udp stack has set the UDP_SKB_IS_STATELESS flag, later skb free assumes all skb head state has been dropped already. This will leak the extension memory in case the skb has extensions other than the ipsec secpath, e.g. bridge nf data. To fix this, set the UDP_SKB_IS_STATELESS flag only if we don't have extensions or if the extension space can be free'd. Fixes: 895b5c9f206eb7d25dc1360a ("netfilter: drop bridge nf reset from nf_reset") Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: Byron Stanoszek <gandalf@winds.org> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22net: rtnetlink: prevent underflows in do_setvfinfo()Dan Carpenter1-1/+22
The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22mm/ksm.c: don't WARN if page is still mapped in remove_stable_node()Andrey Ryabinin1-7/+7
It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in remove_stable_node() when it races with __mmput() and squeezes in between ksm_exit() and exit_mmap(). WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150 Call Trace: remove_all_stable_nodes+0x12b/0x330 run_store+0x4ef/0x7b0 kernfs_fop_write+0x200/0x420 vfs_write+0x154/0x450 ksys_write+0xf9/0x1d0 do_syscall_64+0x99/0x510 entry_SYSCALL_64_after_hwframe+0x49/0xbe Remove the warning as there is nothing scary going on. Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com Fixes: cbf86cfe04a6 ("ksm: remove old stable nodes more thoroughly") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()David Hildenbrand1-3/+13
Let's limit shrinking to !ZONE_DEVICE so we can fix the current code. We should never try to touch the memmap of offline sections where we could have uninitialized memmaps and could trigger BUGs when calling page_to_nid() on poisoned pages. There is no reliable way to distinguish an uninitialized memmap from an initialized memmap that belongs to ZONE_DEVICE, as we don't have anything like SECTION_IS_ONLINE we can use similar to pfn_to_online_section() for !ZONE_DEVICE memory. E.g., set_zone_contiguous() similarly relies on pfn_to_online_section() and will therefore never set a ZONE_DEVICE zone consecutive. Stopping to shrink the ZONE_DEVICE therefore results in no observable changes, besides /proc/zoneinfo indicating different boundaries - something we can totally live with. Before commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug"), the memmap was initialized with 0 and the node with the right value. So the zone might be wrong but not garbage. After that commit, both the zone and the node will be garbage when touching uninitialized memmaps. Toshiki reported a BUG (race between delayed initialization of ZONE_DEVICE memmaps without holding the memory hotplug lock and concurrent zone shrinking). https://lkml.org/lkml/2019/11/14/1040 "Iteration of create and destroy namespace causes the panic as below: kernel BUG at mm/page_alloc.c:535! CPU: 7 PID: 2766 Comm: ndctl Not tainted 5.4.0-rc4 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:set_pfnblock_flags_mask+0x95/0xf0 Call Trace: memmap_init_zone_device+0x165/0x17c memremap_pages+0x4c1/0x540 devm_memremap_pages+0x1d/0x60 pmem_attach_disk+0x16b/0x600 [nd_pmem] nvdimm_bus_probe+0x69/0x1c0 really_probe+0x1c2/0x3e0 driver_probe_device+0xb4/0x100 device_driver_attach+0x4f/0x60 bind_store+0xc9/0x110 kernfs_fop_write+0x116/0x190 vfs_write+0xa5/0x1a0 ksys_write+0x59/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 While creating a namespace and initializing memmap, if you destroy the namespace and shrink the zone, it will initialize the memmap outside the zone and trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page) in set_pfnblock_flags_mask()." This BUG is also mitigated by this commit, where we for now stop to shrink the ZONE_DEVICE zone until we can do it in a safe and clean way. Link: http://lkml.kernel.org/r/20191006085646.5768-5-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Damian Tometzki <damian.tometzki@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22Revert "fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()"Joseph Qi1-23/+33
This reverts commit 56e94ea132bb5c2c1d0b60a6aeb34dcb7d71a53d. Commit 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") introduces a regression that fail to create directory with mount option user_xattr and acl. Actually the reported NULL pointer dereference case can be correctly handled by loc->xl_ops->xlo_add_entry(), so revert it. Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com Fixes: 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by: Thomas Voegtle <tv@lio96.de> Acked-by: Changwei Ge <gechangwei@live.cn> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22can: m_can_platform: remove unnecessary m_can_class_resume() callPankaj Sharma1-2/+0
The function m_can_runtime_resume() is getting recursively called from m_can_class_resume(). This results in a lock up. We need not call m_can_class_resume() during m_can_runtime_resume(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-22can: m_can_platform: set net_device structure as driver dataPankaj Sharma1-1/+1
The current code is failing during clock prepare enable because of not getting proper clock from platform device. [ 0.852089] Call trace: [ 0.854516] 0xffff0000fa22a668 [ 0.857638] clk_prepare+0x20/0x34 [ 0.861019] m_can_runtime_resume+0x2c/0xe4 [ 0.865180] pm_generic_runtime_resume+0x28/0x38 [ 0.869770] __rpm_callback+0x16c/0x1bc [ 0.873583] rpm_callback+0x24/0x78 [ 0.877050] rpm_resume+0x428/0x560 [ 0.880517] __pm_runtime_resume+0x7c/0xa8 [ 0.884593] m_can_clk_start.isra.9.part.10+0x1c/0xa8 [ 0.889618] m_can_class_register+0x138/0x370 [ 0.893950] m_can_plat_probe+0x120/0x170 [ 0.897939] platform_drv_probe+0x4c/0xa0 [ 0.901924] really_probe+0xd8/0x31c [ 0.905477] driver_probe_device+0x58/0xe8 [ 0.909551] device_driver_attach+0x68/0x70 [ 0.913711] __driver_attach+0x9c/0xf8 [ 0.917437] bus_for_each_dev+0x50/0xa0 [ 0.921251] driver_attach+0x20/0x28 [ 0.924804] bus_add_driver+0x148/0x1fc [ 0.928617] driver_register+0x6c/0x124 [ 0.932431] __platform_driver_register+0x48/0x50 [ 0.937113] m_can_plat_driver_init+0x18/0x20 [ 0.941446] do_one_initcall+0x4c/0x19c [ 0.945259] kernel_init_freeable+0x1d0/0x280 [ 0.949591] kernel_init+0x10/0x100 [ 0.953057] ret_from_fork+0x10/0x18 [ 0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668) [ 0.962681] ---[ end trace 881f71bd609de763 ]--- [ 0.967301] Kernel panic - not syncing: Attempted to kill init! A device driver for CAN controller hardware registers itself with the Linux network layer as a network device. So, the driver data for m_can should ideally be of type net_device. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-22crypto: vmx - Avoid weird build failuresMichael Ellerman1-3/+3
In the vmx crypto Makefile we assign to a variable called TARGET and pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts. The variable is meant to describe what flavour of powerpc we're building for, eg. either 32 or 64-bit, and big or little endian. Unfortunately TARGET is a fairly common name for a make variable, and if it happens that TARGET is specified as a command line parameter to make, the value specified on the command line will override our value. In particular this can happen if the kernel Makefile is driven by an external Makefile that uses TARGET for something. This leads to weird build failures, eg: nonsense at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45. /linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed Which shows that we passed an empty value for $(TARGET) to the perl script, confirmed with make V=1: perl /linux/drivers/crypto/vmx/ghashp8-ppc.pl > drivers/crypto/vmx/ghashp8-ppc.S We can avoid this confusion by using override, to tell make that we don't want anything to override our variable, even a value specified on the command line. We can also use a less common name, given the script calls it "flavour", let's use that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: lib/chacha20poly1305 - use chacha20_crypt()Eric Biggers1-8/+8
Use chacha20_crypt() instead of chacha_crypt(), since it's not really appropriate for users of the ChaCha library API to be passing the number of rounds as an argument. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: x86/chacha - only unregister algorithms if registeredEric Biggers1-1/+2
It's not valid to call crypto_unregister_skciphers() without a prior call to crypto_register_skciphers(). Fixes: 84e03fa39fbe ("crypto: x86/chacha - expose SIMD ChaCha routine as library function") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: chacha_generic - remove unnecessary setkey() functionsEric Biggers1-15/+3
Use chacha20_setkey() and chacha12_setkey() from <crypto/internal/chacha.h> instead of defining them again in chacha_generic.c. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: amlogic - enable working on big endian kernelCorentin Labbe2-43/+34
On big endian kernel, the GXL crypto driver does not works. This patch do the necessary modification to permit it to work on BE kernel (removing bitfield and adds some cpu_to_le32). Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun8i-ce - enable working on big endianCorentin Labbe2-34/+40
On big endian kernel, the sun8i-ce crypto driver does not works. This patch do the necessary modification to permit it to work on BE kernel (setting descriptor entries as __le32 and adding some cpu_to_le32) Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHEREric Biggers1-1/+1
Another instance of CRYPTO_BLKCIPHER made it in just after it was renamed to CRYPTO_SKCIPHER. Fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22hwrng: ks-sa - Enable COMPILE_TESTHerbert Xu1-1/+1
This patch enables COMPILE_TEST on the ks-sa-rng driver. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: essiv - remove redundant null pointer check before kfreeChen Wandun1-2/+1
kfree has taken null pointer check into account. so it is safe to remove the unnecessary check. Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: atmel-aes - Change data type for "lastc" bufferTudor Ambarus1-1/+1
In case of in-place decryption, the "lastc" buffer is used to copy the last ciphertext block before the decryption of the message. It is later used to update the req->iv of the skcipher_request. "lastc" variable is not used to interact with the hardware, there is no restriction to be of type "u32". Change the type of "lastc" to "u8". Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: atmel-tdes - Set the IV after {en,de}cryptTudor Ambarus1-2/+38
The req->iv of the skcipher_request is expected to contain the last ciphertext block when the {en,de}crypt operation is done. In case of in-place decryption, copy the ciphertext in an intermediate buffer before decryption. This fixes the following tcrypt tests: alg: skcipher: atmel-cbc-des encryption test failed (wrong output IV) on test vector 0, cfg="in-place" 00000000: fe dc ba 98 76 54 32 10 alg: skcipher: atmel-cbc-tdes encryption test failed (wrong output IV) on test vector 0, cfg="in-place" 00000000: 7d 33 88 93 0f 93 b2 42 Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - fix big endian issuesCorentin Labbe1-10/+11
When testing BigEndian kernel, the sun4i-ss was failling all crypto tests. This patch fix endian issues with it. Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - hide the Invalid keylen messageCorentin Labbe1-1/+1
Drop the "Invalid keylen" message to debug level, it adds no value, and when CRYPTO_EXTRA_TEST is enabled, it floods the console. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - use crypto_ahash_digestsizeCorentin Labbe1-1/+1
The size of the digest is different between MD5 and SHA1 so instead of using the higher value (5 words), let's use crypto_ahash_digestsize(). Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - remove dependency on not 64BITCorentin Labbe1-1/+1
The driver now compile without warnings on 64bits, we can remove the !64BIT condition. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.cCorentin Labbe1-6/+6
If you try to compile this driver on a 64-bit platform then you will get warnings because it mixes size_t with unsigned int which only works on 32-bit. This patch fixes all of the warnings on sun4i-ss-hash.c. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22MAINTAINERS: Add maintainer for HiSilicon SEC V2 driverZaibo Xu1-0/+10
Here adds maintainer information for security engine driver. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: hisilicon - add DebugFS for HiSilicon SECZaibo Xu3-0/+332
The HiSilicon SEC engine driver uses DebugFS to provide main debug information for user space. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>