| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since the struct lsm_info table is not an initcall, we can just move it
into INIT_DATA like all the other tables.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
ARMv8R/M architecture defines new memory protection scheme - PMSAv8
which is not compatible with PMSAv7.
Key differences to PMSAv7 are:
- Region geometry is defined by base and limit addresses
- Addresses need to be either 32 or 64 byte aligned
- No region priority due to overlapping regions are not allowed
- It is unified, i.e. no distinction between data/instruction regions
- Memory attributes are controlled via MAIR
This patch implements support for PMSAv8 MPU defined by ARMv8R/M
architecture.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Let's put the TCM stuff in the __init section directly. No need for
a separately freed memory area.
Remove redundant linker sections, as well as comments that were more
confusing than no comments at all. Finally make it XIP compatible by
using LOAD_OFFSET in the section LMA specification.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
This is a plain move with identical results, and therefore
still broken in the XIP case.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Move common entries to vmlinux.lds.h as ARM_TEXT.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Move common entries to vmlinux.lds.h and leave XIP and non-XIP entries
in their respective file. The ARM_NOMMU_KEEP() and ARM_NOMMU_DISCARD()
macros are added to be usable within the definition of ARM_DISCARD macro.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Lots of duplications between vmlinux.lds.S and vmlinux-xip.lds.S.
This may lead to one file being updated but not the other. For example,
SOFTIRQENTRY_TEXT and HYPERVISOR_TEXT were missing from the XIP version.
This creates vmlinux.lds.h where a bunch of common defines are moved.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Avoid adding kprobes to any of the kernel entry/exit or startup
assembly code, or code in the identity-mapped region. This code does
not conform to the standard C conventions, which means that the
expectations of the kprobes code is not forfilled.
Placing kprobes at some of these locations results in the kernel trying
to return to userspace addresses while retaining the CPU in kernel mode.
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Pull ARM updates from Russell King:
- add support for ELF fdpic binaries on both MMU and noMMU platforms
- linker script cleanups
- support for compressed .data section for XIP images
- discard memblock arrays when possible
- various cleanups
- atomic DMA pool updates
- better diagnostics of missing/corrupt device tree
- export information to allow userspace kexec tool to place images more
inteligently, so that the device tree isn't overwritten by the
booting kernel
- make early_printk more efficient on semihosted systems
- noMMU cleanups
- SA1111 PCMCIA update in preparation for further cleanups
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits)
ARM: 8719/1: NOMMU: work around maybe-uninitialized warning
ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r"
ARM: 8713/1: NOMMU: Support MPU in XIP configuration
ARM: 8712/1: NOMMU: Use more MPU regions to cover memory
ARM: 8711/1: V7M: Add support for MPU to M-class
ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE
ARM: 8709/1: NOMMU: Disallow MPU for XIP
ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C
ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers
ARM: 8706/1: NOMMU: Move out MPU setup in separate module
ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel()
ARM: 8705/1: early_printk: use printascii() rather than printch()
ARM: 8703/1: debug.S: move hexbuf to a writable section
ARM: add additional table to compressed kernel
ARM: decompressor: fix BSS size calculation
pcmcia: sa1111: remove special sa1111 mmio accessors
pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources
ARM: better diagnostics with missing/corrupt dtb
ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size()
ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init
..
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, there is assumption in early MPU setup code that kernel
image is located in RAM, which is obviously not true for XIP. To run
code from ROM we need to make sure that it is covered by MPU. However,
due to we allocate regions (semi-)dynamically we can run into issue of
trimming region we are running from in case ROM spawns several MPU
regions. To help deal with that we enforce minimum alignments for start
end end of XIP address space as 1MB and 128Kb correspondingly.
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The .data segment stored in ROM is only copied to RAM once at boot time
and never referenced afterwards. This is arguably a suboptimal usage of
ROM resources.
This patch allows for compressing the .data segment before storing it
into ROM and decompressing it to RAM rather than simply copying it,
saving on precious ROM space.
Because global data is not available yet (obviously) we must allocate
decompressor workspace memory on the stack. The .bss area is used as a
stack area for that purpose before it is cleared. The required stack
frame is 9568 bytes for __inflate_kernel_data() alone, so make sure
the .bss is large enough to cope with that plus extra room for called
functions or fail the build.
Those numbers were picked arbitrarily based on the above 9568 byte
stack frame:
10240 (2.5 * PAGE_SIZE): used to override -Wframe-larger-than whose
default value is 1024.
12288 (3 * PAGE_SIZE): minimum .bss size to contain the stack.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
The XIP linker script has several problems:
- PAGE_ALIGNED_DATA is missing and is likely to end up somewhere with
the wrong LMA.
- BUG_TABLE definitely has the wrong LMA, it is not copied to RAM, and
its VMA is unaccounted for and likely to clash with dynamic memory
usage.
- TCM usage is similarly broken.
- PERCPU_SECTION is left in ROM despite being written to.
Let's use generic macros for those things and locate them appropriately.
Incidentally, those macros are usable with a LMA != VMA already by
properly defining LOAD_OFFSET.
TCM is not fixed here. It never worked in a XIP configuration anyway, so
that can wait until another round of cleanups.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Remove stuff from vmlinux.lds.S that is relevant only to the XIP build,
and stuff from vmlinux-xip.lds.S related to self-modifying code that
makes no sense in the XIP case.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
Let's use optimized routines such as memcpy to copy .data and memzero
to clear .bss in the startup code instead of doing it one word at a
time. Those routines don't use any global data so they're safe to use
even if .data and .bss segments are not initialized.
In the .data copy case a temporary stack is installed in the .bss area
as the actual kernel stack is located within the copied data area. The
XIP kernel linker script ensures a 8 byte alignment for that purpose.
Finally, make the .data copy and related pointers surrounded by
CONFIG_XIP_KERNEL to make it obvious what it is all about. This will
allow for further cleanups in the non-XIP linker script.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
|
|
The kbuild test robot reported this build failure on a number
of architectures:
> make.cross ARCH=arm
> lib/lib.a(bug.o): In function `find_bug':
> >> lib/bug.c:135: undefined reference to `__start___bug_table'
> >> lib/bug.c:135: undefined reference to `__stop___bug_table'
Caused by:
19d436268dde ("debug: Add _ONCE() logic to report_bug()")
Which moved the BUG_TABLE from RO_DATA_SECTION() to RW_DATA_SECTION(),
but a number of architectures don't use RW_DATA_SECTION(), so they
ended up with no __bug_table[] ...
Ideally all those would use RW_DATA_SECTION() in their linker scripts,
but that's for another day.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20170330154927.o6qmgfp4bdhrajbm@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit 7619751f8c90 ("ARM: 8595/2: apply more __ro_after_init") caused
a regression with XIP kernels by moving the __ro_after_init data into
the read-only section. With XIP kernels, the read-only section is
located in read-only memory from the very beginning.
Work around this by moving the __ro_after_init data back into the .data
section, which will be in RAM, and hence will be writable.
It should be noted that in doing so, this remains writable after init.
Fixes: 7619751f8c90 ("ARM: 8595/2: apply more __ro_after_init")
Reported-by: Andrea Merello <andrea.merello@gmail.com>
Tested-by: Andrea Merello <andrea.merello@gmail.com> [ XIP stm32 ]
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".
We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.
This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.
Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With CONFIG_DEBUG_RODATA not being sensible under XIP_KERNEL, remove it
from the XIP linker script.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
For an XIP build, _etext does not represent the end of the
binary image that needs to stay mapped into the MODULES_VADDR area.
Years ago, data came before text in the memory map. However,
now that the order is text/init/data, an XIP_KERNEL needs to map
up to the data location in order to keep from cutting off
parts of the kernel that are needed.
We only map up to the beginning of data because data has already been
copied, so there's no reason to keep it around anymore.
A new symbol is created to make it clear what it is we are referring
to.
This fixes the bug where you might lose the end of your kernel area
after page table setup is complete.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit b9b32bf70f2f ("ARM: use linker magic for vectors and vector stubs")
updated the linker script to emit the .vectors and .stubs sections into a
VMA range that is zero based and disjoint from the normal static kernel
region. The reason for that was that this way, the sections can be placed
exactly 4 KB apart, while the payload of the .vectors section is only 32
bytes.
Since the symbols that are part of the .stubs section are emitted into the
kallsyms table, they appear with zero based addresses as well, e.g.,
00001004 t vector_rst
00001020 t vector_irq
000010a0 t vector_dabt
00001120 t vector_pabt
000011a0 t vector_und
00001220 t vector_addrexcptn
00001240 t vector_fiq
00001240 T vector_fiq_offset
As this confuses perf when it accesses the kallsyms tables, commit
7122c3e9154b ("scripts/link-vmlinux.sh: only filter kernel symbols for
arm") implemented a somewhat ugly special case for ARM, where the value
of CONFIG_PAGE_OFFSET is passed to scripts/kallsyms, and symbols whose
addresses are below it are filtered out. Note that this special case only
applies to CONFIG_XIP_KERNEL=n, not because the issue the patch addresses
exists only in that case, but because finding a limit below which to apply
the filtering is not entirely straightforward.
Since the .vectors and .stubs sections contain position independent code
that is never executed in place, we can emit it at its most likely runtime
VMA (for more recent CPUs), which is 0xffff0000 for the vector table and
0xffff1000 for the stubs. Not only does this fix the perf issue with
kallsyms, allowing us to drop the special case in scripts/kallsyms
entirely, it also gives debuggers a more realistic view of the address
space, and setting breakpoints or single stepping through code in the
vector table or the stubs is more likely to work as expected on CPUs that
use a high vector address. E.g.,
00001240 A vector_fiq_offset
...
c0c35000 T __init_begin
c0c35000 T __vectors_start
c0c35020 T __stubs_start
c0c35020 T __vectors_end
c0c352e0 T _sinittext
c0c352e0 T __stubs_end
...
ffff1004 t vector_rst
ffff1020 t vector_irq
ffff10a0 t vector_dabt
ffff1120 t vector_pabt
ffff11a0 t vector_und
ffff1220 t vector_addrexcptn
ffff1240 T vector_fiq
(Note that vector_fiq_offset is now an absolute symbol, which kallsyms
already ignores by default)
The LMA footprint is identical with or without this change, only the VMAs
are different:
Before:
Idx Name Size VMA LMA File off Algn
...
14 .notes 00000024 c0c34020 c0c34020 00a34020 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
15 .vectors 00000020 00000000 c0c35000 00a40000 2**1
CONTENTS, ALLOC, LOAD, READONLY, CODE
16 .stubs 000002c0 00001000 c0c35020 00a41000 2**5
CONTENTS, ALLOC, LOAD, READONLY, CODE
17 .init.text 0006b1b8 c0c352e0 c0c352e0 00a452e0 2**5
CONTENTS, ALLOC, LOAD, READONLY, CODE
...
After:
Idx Name Size VMA LMA File off Algn
...
14 .notes 00000024 c0c34020 c0c34020 00a34020 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
15 .vectors 00000020 ffff0000 c0c35000 00a40000 2**1
CONTENTS, ALLOC, LOAD, READONLY, CODE
16 .stubs 000002c0 ffff1000 c0c35020 00a41000 2**5
CONTENTS, ALLOC, LOAD, READONLY, CODE
17 .init.text 0006b1b8 c0c352e0 c0c352e0 00a452e0 2**5
CONTENTS, ALLOC, LOAD, READONLY, CODE
...
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
When building an XIP kernel, the linker script needs to be much different
than a conventional kernel's script. Over time, it's been difficult to
maintain both XIP and non-XIP layouts in one linker script. Therefore,
this patch separates the two procedures into two completely different
files.
The new linker script is essentially a straight copy of the current script
with all the non-CONFIG_XIP_KERNEL portions removed.
Additionally, all CONFIG_XIP_KERNEL portions have been removed from the
existing linker script...never to return again.
It should be noted that this does not fix any current XIP issues, but
rather is the first move in fixing them properly with subsequent patches.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
Kees Cook
Vladimir Murzin
Nicolas Pitre
Russell King
Linus Torvalds
Greg Kroah-Hartman
Peter Zijlstra
Chris Metcalf
Chris Brandt
Ard Biesheuvel