linux-dev - Linux kernel development work

Age	Commit message (Collapse)	Author	Files	Lines
2011-03-11	davinci: add spi devices support for MityDSP-L138/MityARM-1808 platform	Michael Williamson	1	-0/+84
	This patch adds support for accessing the on board SPI NOR FLASH device for MityDSP-L138 and MityARM-1808 SoMs. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28	davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs	Michael Williamson	1	-8/+75
	For the MityDSP-L138/MityARM-1808 SoMs, the speed grade can be determined from the part number string read from the factory configuration block on the on-board I2C PROM. Configure the maximum CPU speed based on this information. This patch was tested using a MityDSP-L138 and MityARM-1808 at various speedgrades. Also, for code coverage, a bogus configuration was tested as well as a configuration having an unknown part number. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-10-21	davinci: fix remaining board support after io_pgoffst removal	Kevin Hilman	1	-2/+0
	Some boards that were added after the mass io_pgoffst/io_physio removal, and were not updated in the original patch. Fixup here. c.f. original io_pgoffst/io_physio removal commit 6451d7783ba5ff24eb1a544eaa6665b890f30466 Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-12	davinci: mityomapl138: make file local data static	Sekhar Nori	1	-7/+7
	Most of the regulator data structures are local to the board file, but not made static. Fix this. Also make the nand partition table static. This gets rid of all the sparse warnings for this file. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24	davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom	Michael Williamson	1	-0/+62
	For the MityDSP-L138/MityARM-1808 SOMS, read the factory assigned MAC address from the onboard I2C EPROM and assign it to the emac device during platform initialization. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24	davinci: cleanup mdio arch code and switch to phy_id	Cyril Chemparathy	1	-6/+2
	This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24	davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform	Michael Williamson	1	-0/+145
	This patch adds the i2c0 bus and attached devices to the MityDSP-L138 and MityARM-1808 davinci SoM. Included is a TPS65023 voltage regulator needed for power management and a small 24c02 EPROM that contains factory configuration data. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24	davinci: Initial support for MityDSP-L138/MityARM-1808	Michael Williamson	1	-0/+221
	This patch adds initial support for the MityDSP-L138 and MityDSP-1808 system on Module (SOM) under the machine name "mityomapl138". These SOMs are based on the da850 davinci CPU architecture. Information on these SOMs may be found at http://www.mitydsp.com. Basic support for the console UART, NAND, and EMAC (MII interface) is included in this patch. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>