aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-dove/common.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-11-24ARM: Dove: Fix compiler warnings with C=1 buildsAndrew Lunn1-12/+3
Add missing static keywords. Remove the unused function dove_crypto_init(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-06Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-23/+45
Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-08-06ARM: dove: Move to ID based window creationThomas Petazzoni1-23/+45
With the introduction of the ID based MBus API, it's better to switch to use it instead of the current name based scheme. This will allow to deprecate the name based API, once every user is removed. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-05ASoC: kirkwood: combine kirkwood-i2s and kirkwood-dma driversRussell King1-2/+2
These really should be a single driver because they're fully integrated in hardware. Make them so. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt1-1/+1
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-29ARM: dove: move DT boards to SoC-centric clock initSebastian Hesselbarth1-1/+0
SoC centric clock init for Dove can be used by calling of_clk_init. Use it and get rid of mvebu_clocks_init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15arm: mach-dove: convert to use mvebu-mbus driverThomas Petazzoni1-1/+38
This commit migrates the mach-dove platforms to use the mvebu-mbus driver and therefore removes the Dove-specific addr-map code. The dove_init_early() function now initializes the mvebu-mbus driver by calling mvebu_mbus_init(). The address decoding windows are now registered in the dove_setup_cpu_wins() function. It is worth noting that the four PCIe address decoding windows will ultimately no longer have to be registered here: it will be done automatically by the PCIe driver once Dove has been migrated to use the upcoming mvebu PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Dove: split legacy and DT setupArnd Bergmann1-85/+0
In the beginning of DT for Dove it was reasonable to have it close to non-DT code. With improved DT support, it became more and more difficult to not break non-DT while changing DT code. This patch splits up DT board setup and introduces a DOVE_LEGACY config to allow to remove legacy code for DT-only kernels. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28Merge branch 'timer/cleanup' into late/mvebu2Arnd Bergmann1-6/+2
Basing the mvebu patches on top of the timer cleanup avoids some nasty merges. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-01-31ARM: dove: cleanup includesSebastian Hesselbarth1-20/+9
This patch cleans unneccessary includes and reorders the remaining includes in common dove code. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-12-24ARM: delete struct sys_timerStephen Warren1-6/+2
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-20arm: dove: Convert Dove to DT XOR DMA engineSebastian Hesselbarth1-10/+0
With DT support for Marvell XOR DMA engine, make use of it on Dove. Also remove the now redundant code in DT board init for xor engines. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20dma: mv_xor: change the driver name to 'mv_xor'Thomas Petazzoni1-4/+5
Since we got rid of the per-XOR channel 'mv_xor' driver, now the per-XOR engine driver that used to be called 'mv_xor_shared' can simply be named 'mv_xor'. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20ARM: dove: switch to DT clock providersSebastian Hesselbarth1-15/+48
With true DT clock providers available switch Dove clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT at all. Therefore, some clock aliases are created until the devices also move to DT. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-10-17ARM: dove: Add crypto engine to DTSebastian Hesselbarth1-1/+0
Make use of DT support for the crypto engine on dove and remove the obsolete init call. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Fix clock names of sata and gbeSebastian Hesselbarth1-2/+2
This patch fixes wrong clock names of lately added clock gates for sata and gbe (mv64xx_eth). Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Fix tauros2 device tree initSebastian Hesselbarth1-1/+2
During the review process of dove DT patches, Tauros2 cache init call was changed and DT support added. This patch fixes the call to Tauros2 init and adds a DT node. Moreover, plat/irq.h include was missing from mach-dove/common.c. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-22Merge branch 'kirkwood/addr_decode' of git://git.infradead.org/users/jcooper/linux into late/kirkwoodOlof Johansson1-2/+2
* 'kirkwood/addr_decode' of git://git.infradead.org/users/jcooper/linux: arm: mvebu: add address decoding controller to the DT arm: mvebu: add basic address decoding support to Armada 370/XP arm: plat-orion: make bridge_virt_base non-const to support DT use case arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option arm: plat-orion: use void __iomem pointers for addr-map functions arm: plat-orion: use void __iomem pointers for time functions arm: plat-orion: use void __iomem pointers for MPP functions arm: plat-orion: use void __iomem pointers for UART registration functions arm: mach-mvebu: use IOMEM() for base address definitions arm: mach-orion5x: use IOMEM() for base address definitions arm: mach-mv78xx0: use IOMEM() for base address definitions arm: mach-kirkwood: use IOMEM() for base address definitions arm: mach-dove: use IOMEM() for base address definitions arm: mach-orion5x: use plus instead of or for address definitions arm: mach-mv78xx0: use plus instead of or for address definitions arm: mach-kirkwood: use plus instead of or for address definitions arm: mach-dove: use plus instead of or for address definitions This branch had quite a few conflicts, in particular with the PCI static map rework from Rob Herring, and a few other context conflicts due to changes in Kconfig, etc. I fixed up conflicts in: arch/arm/Kconfig arch/arm/mach-dove/common.c arch/arm/mach-dove/include/mach/dove.h arch/arm/mach-kirkwood/common.c arch/arm/mach-kirkwood/include/mach/kirkwood.h arch/arm/mach-mv78xx0/common.c arch/arm/mach-mv78xx0/include/mach/mv78xx0.h arch/arm/mach-orion5x/common.c arch/arm/mach-orion5x/include/mach/orion5x.h Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22Merge branch 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux into late/kirkwoodOlof Johansson1-12/+141
* 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux: ARM: Dove: allow PCI to be disabled ARM: dove: SolidRun CuBox DT ARM: dove: add device tree descriptors ARM: dove: add device tree based machine descriptor ARM: dove: add crypto engine ARM: dove: add clock gating control ARM: dove: unify clock setup ARM: initial DTS support for km_kirkwood arm: add documentation describing Marvell families of SoC ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar ARM: Kirkwood: Iomega ix2-200 DT support Context conflicts in arch/arm/Kconfig and arch/arm/mach-dove/common.c. The new device trees added to arch/arm/mach-kirkwood/Makefile.boot are kept and dealt with in a separate changeset, since moving them out to the new Makefile in this merge commit doesn't work well. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson1-1/+1
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21arm: plat-orion: use void __iomem pointers for time functionsThomas Petazzoni1-3/+2
The functions for time management now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21arm: plat-orion: use void __iomem pointers for UART registration functionsThomas Petazzoni1-8/+4
The registration functions for UARTs now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21arm: mach-dove: use IOMEM() for base address definitionsThomas Petazzoni1-10/+15
We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-dove code. Note that we introduce a few temporary additional "unsigned long" casts when calling into plat-orion functions. Those are removed by followup patches converting plat-orion functions to void __iomem pointers as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21ARM: dove: add device tree based machine descriptorSebastian Hesselbarth1-0/+67
This adds a generic DT_MACHINE for mach-dove. As with other orion based SoCs there still is some glue code required to make all internal devices work, i.e. auxdata is provided to pass clocks to corresponding device drivers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21ARM: dove: add crypto engineSebastian Hesselbarth1-0/+9
This patch adds a dove specific setup function for the Marvell CESA crypto engine available on orion based SoCs. Dove setup was just missing a function to call orion_crypto_init with dove specific setup. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21ARM: dove: add clock gating controlSebastian Hesselbarth1-1/+56
This patch adds clock gates from the clock gating control register available on dove. All clock gates are hooked up to tclk, except for gigabit ethernet controller (ge) which is a child of gephy to allow both enabled/disabled at the same time. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21ARM: dove: unify clock setupSebastian Hesselbarth1-10/+9
This patch synchronizes the clock setup of dove with other orion-based platforms. In dove_find_tclk there was a note about DOVE_SAMPLE_HI/LO register to detect tclk. While it might be possible to set a different tclk frequency with reset strapping the Dove datasheets don't tell anything about tclk frequency here. Therefore, I removed that comment. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-20Merge branch 'next/dt' into next/multiplatformOlof Johansson1-1/+1
* next/dt: (182 commits) ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: dt: tegra: whistler: configure power off ARM: mxs: m28evk: Disable OCOTP OUI loading ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent ARM: dts: imx6q-sabrelite: add usbotg pinctrl support ARM: dts: imx23-olinuxino: Add USB host support ARM: dts: imx6q-sabrelite: add usbmisc device ARM: dts: mx23: Add USB resources ARM: dts: mxs: Add ethernetX to macX aliases ARM: msm: Remove non-DT targets from 8960 ARM: msm: Add DT support for 8960 ARM: msm: Move io mapping prototypes to common.h ARM: msm: Rename board-msm8x60 to signify its DT only status ARM: msm: Make 8660 a DT only target ARM: msm: Move 8660 to DT timer ARM: msm: Add DT support to msm_timer ...
2012-09-19ARM: orion: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the orion include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de>
2012-09-12Merge branch 'clk' of git://github.com/hzhuang1/linux into next/cleanupOlof Johansson1-1/+2
* 'clk' of git://github.com/hzhuang1/linux: ARM: mmp: remove unused definition in APBC and APMU ARM: mmp: move mmp2 clock definition to separated file arm: mmp: move pxa910 clock definition to separated file arm: mmp: move pxa168 clock definition to separated file arm: mmp: make private clock definition exclude from common clock + Linux 3.6-rc4
2012-09-05Merge branch 'pinmux-dt' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/dtOlof Johansson1-1/+2
This branch enables device tree bindings for the CSR Prima pin control subsystem. All patches acked by Linus W (pinctrl maintainer). * 'pinmux-dt' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel: pinctrl: sirf: add DT-binding pinmux mapping support ARM: PRIMA2: rename prima2-cb.dts to prima2.dtsi as it only has SoC features ARM: PRIMA2: add missing interrupts property for pinctrl node + sync to Linux 3.6-rc4
2012-08-16ARM: mmp&dove: modify tauros2_init callChao Xie1-1/+1
The tauros2_init has argument, change the calling of tauros2_init to support argument. Signed-off-by: Chao Xie <xiechao.mail@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-15ARM: Orion: Set eth packet size csum offload limitArnaud Patard (Rtp)1-1/+2
The mv643xx ethernet controller limits the packet size for the TX checksum offloading. This patch sets this limits for Kirkwood and Dove which have smaller limits that the default. As a side note, this patch is an updated version of a patch sent some years ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html which seems to have been lost. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Cc: <stable@vger.kernel.org>
2012-08-13Merge branch 'cleanup/io-pci' into next/cleanupsArnd Bergmann1-10/+0
From Rob Herring <robherring2@gmail.com>: This is the 2nd part of mach/io.h removals. This series removes io.h on platforms with PCI by creating a fixed virtual I/O mapping and a common __io() macro. This version has changed a bit to accommodate Tegra converting its PCIe host to a platform driver. Now the virtual space is only reserved during early boot before .map_io() is called. The mapping is not created until calling pci_ioremap_io which can be done at any point after vmalloc is initialized. I've gone back to fixed 64K windows for each PCI bus. This allows removing all the i/o resource setup from the individually platforms and placing it within the common ARM PCI code. I've only tested versatilepb under qemu (with the model hacked up to actually enable i/o space), so any testing is appreciated. iop3xx and mv78xx0 have some risk of breaking as the PCI bus addresses are moved to 0 from matching the cpu host bus addesss. * cleanup/io-pci: ARM: iop3xx: use fixed PCI i/o mapping ARM: mv78xx0: use fixed pci i/o mapping ARM: iop13xx: use fixed PCI i/o mapping iop13xx: use more regular PCI I/O space handling ARM: orion5x: use fixed PCI i/o mapping ARM: kirkwood: use fixed PCI i/o mapping ARM: dove: use fixed PCI i/o mapping ARM: footbridge: use fixed PCI i/o mapping ARM: shark: use fixed PCI i/o mapping ARM: integrator: remove trailing whitespace on pci_v3.c ARM: integrator: use fixed PCI i/o mapping ARM: tegra: use fixed PCI i/o mapping ARM: versatile: use fixed PCI i/o mapping ARM: move PCI i/o resource setup into common code ARM: Add fixed PCI i/o mapping i2c: iop3xx: use standard gpiolib functions i2c: iop3xx: clean-up trailing whitespace Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-26ARM: dove: use fixed PCI i/o mappingRob Herring1-10/+0
The i/o regions are changed from 1MB to 64KB. It's likely that the 2nd bus is not setup correctly. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-07-25ARM: Dove: Fixup ge00 initialisationHannes Reinecke1-2/+2
The last argument of orion_ge00_init() is actually the error interrupt, so we should be using the correct value here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-14/+25
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-14Dove: Fix Section mismatch warningsAndrew Lunn1-1/+1
Add missing __init markups to GPIO and timer functions. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-08ARM: Orion: UART: Get the clock rate via clk_get_rate().Andrew Lunn1-4/+4
Let the machine pass to the platform which clock is used by the uart. Enable the clock and use clk_get_rate() to determine its rate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: Eth: Add clk/clkdev support.Andrew Lunn1-2/+1
The t_clk is moved from the shared part of the ethernet driver into the per port section. Each port can have its own gated clock, which it needs to enable/disable, as oppossed to there being one clock shared by all ports. In practice, only kirkwood supports this at the moment. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: SPI: Add clk/clkdev support.Andrew Lunn1-2/+4
Remove now redundant tclk from SPI platform data. This makes the platform data empty, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08ARM: Orion: Add clocks using the generic clk infrastructure.Andrew Lunn1-6/+16
Add tclk as a fixed rate clock for all platforms. In addition, on kirkwood, add a gated clock for most of the clocks which can be gated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> [mturquette@linaro.org: removed redundant CLKDEV_LOOKUP from Kconfig] [mturquette@linaro.org: removed redundant clk.h from mach-dove/common.c] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-02-09ARM: orion: Fix USB phy for orion5x.Andrew Lunn1-1/+2
The patch "ARM: orion: Consolidate USB platform setup code.", commit 4fcd3f374a928081d391cd9a570afe3b2c692fdc broke USB on TS-7800 and other orion5x boards, because the wrong type of PHY was being passed to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION and all the others want EHCI_PHY_NA. Allow the mach- code to tell the generic plat-orion code which USB PHY enum to place into the platform data. Version 2: Rebase to v3.3-rc2. Reported-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-09Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-10/+6
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-05ARM: restart: dove: use new restart hookRussell King1-0/+16
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-13ARM: Orion: Remove address map info from all platform data structuresAndrew Lunn1-10/+5
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-13ARM: Orion: mbus_dram_info consolidationAndrew Lunn1-5/+6
Move the *_mbus_dram_info structure into the orion platform and call it orion_mbus_dram_info everywhere. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-09-14ARM: Dove: fix second SPI initialization callNicolas Pitre1-1/+1
Commit 980f9f601a "ARM: orion: Consolidate SPI initialization." broke it by overwriting the SPI0 registration. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-06-17ARM: remove duplicate include from arch/arm/mach-dove/common.cAndrew Lunn1-2/+0
Jesper Juhl pointed out there is a redundant include of linux/serial_8250.h. However it turns out both are redundant. This patch removes them both. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-16ARM: orion: Consolidate SATA platform setup.Andrew Lunn1-27/+3
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.